For Sale: Parting out Alberg 35

[pcats1]

Alberg 35 Sailboat-project - $3000 (Stuart, FL)



Selling a 1965 Alberg 35. Am in the process of dismantling the boat. She is available nearly whole or in pieces. As each day goes by, I am removing more and more. Rudder rebuilt, main hatch rebuilt, tiller refinished, etc. Boat as is including motor but without Monitor windvane: $3000; Adder for Monitor $1000.

Mast is unavailable but have a 33' English built mast, boom and rigging available: $200
New Mainsail for above: $500

Hull is extremely strong and overbuilt. Modified with additional ribs forward. Dog/deck house needs to be refinished inside. Motor is removed but is available. Partial listing and photo follows. Note, this photo is about 10 years old. The hull looks the same, teak trim looks rough.

Dodger, Bimini & Rain catchment system: $500

1986 Kubota D850 3 cyl diesel with new Hurth transmission (about 30 hours) Engine block has significant rust-rebuilt short block available for $1,300. Motor w/trans as is: $1000.

Simpson Lawrence Hi-Speed Manual anchor windlass: $200
25# CQR-good condition: $100
5/16" chain, good condition: $0.50/foot (approx. 100')
35# CQR-good: $150
2 Danforths: 1 poor-$25; 1 good (smaller): $25
2 Anchor rollers-make offer
Assorted cleats and chocks: Make offer
2 anchor rollers: $100 & $50

8 Bronze ports: 5 opening; 3 fixed: $100 each for opening; $50 each for fixed.

Lavac Vacuflush head: $100

2 Merriman cockpit (sheet) winches: $50 each

Monitor Windvane self steering: $1,000 very good condition

Life raft: 2-4 man coastal in valise needs new CO2 canisters and inspection: $100

Interior lighting: $5 each

Tanks: fuel, water and holding with all plumbing: Make offer

2 Burner propane stove: $50

Many miscellaneous parts and tools too numerous to list.

Call or text to 561.373.1820, I'll call you back.


Location: Stuart, FL

[Celestialsailor]

Can you tell me what shape the Lavac head is in and which model?

[pcats1]

The Lavac is in very good condition. Problem is my back is out and I cannot remove it. I'll have to pay someone to remove it and package up for shipment. If you are still interested, I'll get the model number next time I go to the boat. Boat is in SE Florida (Stuart).

Regards,
Phil

[sailing_jack]

I would be interested in the following:

Simpson Lawrence Hi-Speed Manual anchor windlass: $200
25# CQR-good condition: $100
5/16" chain, good condition: $0.50/foot (approx. 100')
35# CQR-good: $150
2 Danforths: 1 poor-$25; 1 good (smaller): $25
2 Anchor rollers-make offer
Assorted cleats and chocks: Make offer
2 anchor rollers: $100 & $50

8 Bronze ports: 5 opening; 3 fixed: $100 each for opening; $50 each for fixed.

Can you give me a package price? also need to figure in the cost of shipping.
It may be easiest for you to ship to Ogdensgurg NY, and I can pick it up there.

[pcats1]

Thanks for your interest.

Presently, I still have:

1. Manual windlass: $200 firm

2. 35# CQR knock off -been in the water for 2 years-has surface rust and barnacles- $50 firm

3. 100' 3/8" chain- been in water for 2 years-good condition not too loaded with barnacles-$1/ft firm

4. The two Danforths for $50 together

5. 4 Bronze chocks all polished and looking new-$100 firm.

6. 5 opening and 2 fixed bronze ports- $500 firm.

7. 6-8 man canister offshore life raft- needs certification- (last 2006) $450 firm.

Don't know how much shipping would be-probably best to know what you want and then I can find out.

Let me know,
Phil Catsman
561.373.1820

Originally Posted by sailing_jack

I would be interested in the following:



Simpson Lawrence Hi-Speed Manual anchor windlass: $200
25# CQR-good condition: $100
5/16" chain, good condition: $0.50/foot (approx. 100')
35# CQR-good: $150
2 Danforths: 1 poor-$25; 1 good (smaller): $25
2 Anchor rollers-make offer
Assorted cleats and chocks: Make offer
2 anchor rollers: $100 & $50

8 Bronze ports: 5 opening; 3 fixed: $100 each for opening; $50 each for fixed.

Can you give me a package price? also need to figure in the cost of shipping.
It may be easiest for you to ship to Ogdensgurg NY, and I can pick it up there.

[Celestialsailor]

I'm thinking the shipping might kill the Lavac deal with me in California...sorry

[Benz]

Hi,

I'm interested in the Monitor Windvane. Can you call me? 757 817 1529. PM is good if you can't get me by phone. In RI, so shipping would be to ZIP 02840.
Thanks,
Ben

[Opie91]

Might be interested in windlass. Do you have any pics? Please PM me.
Thanks

[Mambo]

Do you have those midship combo chock / cleats? If so what do you want for them?
TIA

[sailing_jack]

I think my last message got lost somewhere.

If you still have the manual windlass, chock/cleats, and bronze ports, I am interested in them. please send PM and we can make a deal.

Thanks

Y

[casual]

What type of propane stove ?I,live in Stuart have intress in other items ,Mainlyy stove.

[SVTatia]

I am interested in the Lavac - are you also selling the pump and which model pump is it? Can you ship to Niagara Falls NY?
Thanks

[tropicalescape]

Is the life raft and windvane still for sale?..DVC