For Sale: NAVTEC hydr. backstay adjuster IA7-17

[LeaseOnLife]

Technical data:
Pin to pin, 25" - 32"
Pin diameter: 5/8"
Serial# 1174

Condition:

• Age is unknown, it comes of 1991-built boat, which was in fresh water only, until 2008. Since then, we sailed it around the world.
• The lower end has a small leak, most likely the pump, but the system does hold pressure.
  A seal kit "A370-SK-017" is available for ~120: Navtec A370-SK-017 SEAL KIT FOR 12/17 INTEGRAL | Fisheries Supply
  
• During our cruise, we had to change the seal at the top end. The left over parts of the seal kit "should" have the needed seals for the bottom end.
• The pressure gauge is blind, and not working, it costs ~$200, probably not worth replacing, part# A060-01-00
• The top jaw (anodized aluminum) has some pitting around the hole for the clevis pin.
• The anodized aluminum housing is in good condition, see pictures

Pictures:
Cruisers & Sailing Forums - LeaseOnLife's Album: IA7-17

Manual:
http://www.navtec.net/%5Cassets%5Cim...ec-Series7.pdf

Rebuild instructions:
I recommend to use a Navtec rigging shop or hydraulic shop, but if you want to do it yourself, here are instructions:
http://www.sailtec.de/pic/upload/nav...ice_manual.pdf

Current location:
USA, Miami, Dinner Key

Price:
If I can avoid shipping and you can come to Miami the next 2 weeks, make me an offer, I would think >=$200 is fair.
Shipping in the continental US is possible, but I would need to buy some packaging, count on $50 for S&H.

Contact:
PM me