HUGE List of Boat Building Materials - All Half Price

[oceannavigator]

I have an enormous amout of materials the builders here could use at really, really low cost.

Basically, I'm selling everything on this list at half of what I paid for it. All high quality brand name.

:idea::idea:In fact, show me a link to any item here online and you will pay half of the price in the link!

Pictures are available for every item. Items located inside USA, but will ship anywhere. Just ask if you would like to see additional pictures of any item listed.

•NidaCore 1", Coated Balsa Core - 176 Square Feet in 2' x4' sheets.

This Nidacore brand Balsalite is very lightweight balsa with a coating applied at the factory to prevent excessive resin uptake. Scrim on the back and able to conform to complex curves. Stored indoors and fully sealed. Never opened. Straight from the factory.

•Airtech AT-199 Vacuum Bag Sealant Tape 1/16" x 3/8" x 50ft PER ROLL ** 80 Rolls Available!

This is amazing, brand name tape for quickly and fully sealing off a vacuum bag for regular bagging or resin infusion bagging.

•25mm (1/2") BS1088, Lloyds of London Registered Okoume Plywood Sheets. 20 sheets available.

ZERO voids, purchased from Boulter Plywood and stored indoors. Manufactured in Greece. The best money can buy.

•5 Gallons of MAS Fast Hardener
•5 Gallons of MAS Infucure Infusion Hardener

•Amprobe ULD-300 Ultrasonic Leak Detector

Much more to come! All sold at half of any price you can show me online. Pictures of all available if needed.

[HappyMdRSailor]

Any Glass? other epoxy resins/hardeners?

Really Fair deals... FYI for others, I found a new ULD-300 for $300
and the 5gal MAS fast for $500

[rockDAWG]

Originally Posted by oceannavigator

Items located inside USA, but will ship anywhere.

It looks like local pick up is not an option for this sale. ??? USA is a big country, knowing where about is good info for the potential buyers.

[skipmac]

I might need a few sheets of the balsa core. Need to go measure the thickness where I need to replace some wet core. If I need thinner than 1" can this stuff be run through a planer or sanded down a bit?

Also would be interested in some of the plywood but last time I checked shipping on 4X8 paneling the shipping cost more than the wood. So how close are you to north central FL?

[oceannavigator]

Originally Posted by HappyMdRSailor

Any Glass? other epoxy resins/hardeners?

Really Fair deals... FYI for others, I found a new ULD-300 for $300
and the 5gal MAS fast for $500

Sorry. Low on glass at the moment. This is where the proceeds of the sale of these materials will go.

Also, low on resin, but I have all of this excess hardener.

[oceannavigator]

Originally Posted by rockDAWG

It looks like local pick up is not an option for this sale. ??? USA is a big country, knowing where about is good info for the potential buyers.

Quite hesitant to share the location of my boat build. A lot of people here and on other boat forums know me in person, however. Mostly, I would prefer shipping. If you are in FL and want to pick up locally, it can be arranged privately.

[oceannavigator]

Originally Posted by skipmac

I might need a few sheets of the balsa core. Need to go measure the thickness where I need to replace some wet core. If I need thinner than 1" can this stuff be run through a planer or sanded down a bit?

Also would be interested in some of the plywood but last time I checked shipping on 4X8 paneling the shipping cost more than the wood. So how close are you to north central FL?

You won't be able to plane balsa like this successfully, unless you glass the side you are not planing first. Even then, no guarantee... it may fall apart.

Best to use the size core you need.

Shipping on this wood isn't more than the cost. This is the most expensive stuff available, except it's half price here. You could pick it up though. It is in FL.

[oceannavigator]

PS: To avoid confusion, I am willing to sell the epoxy products as half gallons and quarts. I just have 5 gallons of each on hand.

[HappyMdRSailor]

Originally Posted by oceannavigator

Sorry. Low on glass at the moment. This is where the proceeds of the sale of these materials will go.

Also, low on resin, but I have all of this excess hardener.

Thanks for the heads up!

Good luck on the garage boat shed sale!

[Cheechako]

25mm is ~1" not 1/2"

[SkiprJohn]

Originally Posted by oceannavigator

Quite hesitant to share the location of my boat build. A lot of people here and on other boat forums know me in person, however. Mostly, I would prefer shipping. If you are in FL and want to pick up locally, it can be arranged privately.

Knowing that you are in or near Florida helps a lot.

[rberrey]

Is the plywood in the Jacksonville area ?

[Boatguy30]

I'm interested in some of the ply. I paid $101 per sheet last year for Joubert 1088 from Homestead Hardwoods.

I believe I know where your large collapsible boat shed is.

[oceannavigator]

Originally Posted by Cheechako

25mm is ~1" not 1/2"

Good catch! I was thinking of the core when I wrote that. 12mm ply.

[oceannavigator]

Originally Posted by Boatguy30

I'm interested in some of the ply. I paid $101 per sheet last year for Joubert 1088 from Homestead Hardwoods.

I believe I know where your large collapsible boat shed is.

That's great that you paid $101 for your Joubert last year.

Here is the pricing on this plywood:

http://www.boulterplywood.com/MarinePlywood_4.htm

Half inch.