Harken MK3 UNIT 1
roller furler unit.. max kit headstay length is 46'4"( of course you can also
purchase additional foils from
Harken should you need more than the foils included extra 7 ft foil$80 to $90
This unit is for 1/4" OR 9/32" and metric 6,7 OR 8 mm and Nitronic 50 rod
rigging...-8 OR - 10 fore-stay
This Kit has everything you need to install the unit on your boat..aside from
head stay.....Includes a SECOND top bearing/swivel....both in perfect shape.....Price the top swivel alone from Harken and you can see what a deal you are getting..the shims are NEW and a few of the foils as well.....ALL in excellent condition ....includes a
halyard restrainer and new mylar sticker back...you may or may not need this depending on where the top bearing sits in relation to the
Halyard....but nice to have as a lot of boats do require this...also includes about 10 brand new Delrin ball bearings as spares should you need them down the road...........
Never seen
salt water......this is an extra unit i have had for a few years and has not seen much use.......
Great Unit with removable drum for racing!...tack and
head swivel that cheaper units don't have ....this improves sail shape after a few turns are rolled in and reduces heeling going upwind.......
I know i have forgotten something....but feel free to contact me with any questions......I have a few more PICS as well.....
installation manual included .... these are dead easy to install and can be done without outside
rigging services should you choose to use a Norseman/Stay-lock fitting as the bottom termination for your fore stay ( which I recommend... can be inspected/replaced need be.... on the go......
Thanks for looking
Ta
Rob
Linear Mode
Vendor Spotlight
Chevy Camaro Forum
Ford Mustang Forum
Jeep Wrangler Forum
Volkswagen Touareg Forum
Land Rover Defender Forum
