For Sale: Engine and equipment intended for 50' C-Deuce Ketch

[moose06]

I have the following items for sale that were intended to go into a C.F. Norris designed Sampson Marine C-Deuce Ketch. This was my dad's project but he died about a year ago before his dream could be realized. All items listed below were purchased 20+ years ago but still new....never used or installed.

I would prefer to sell all items as a package but will consider some individually. All items available for considerably less than today's pricing.

- (1) Tempest 70 HP Marine diesel engine complete with PRM 2655 gearbox, gauges, tach, switch and keys, and Morse single control lever.(Engine still in shipping crate).
- Stern gear: Prop shaft 1.5" x 9'6" overall length. Stern tube 5'10". Prop 20" dia/15 pitch, couplings left pilot bored, right hand rotation.
- Wagner hydraulic steering system, model N 175-1000 single rotation. 2" bore tiller arm.
- Helm control valve (3 way).
- (16) 9" naval brass Portlights by Den Ouden.
- (2) Skipper Seaclo toilets.
- Dozens of required hull fittings (bronze). Fullway seacocks, straight tail pieces, curved tail pieces, thru hulls, vented loops, scoop, deck fills.
- Compression columns: (1) 6"x6"x8' and (1) 4"x4"x8'
- S.S. angle irons: (1) 4"x4"x3/8"x10'8" for engine beds, (1) 3"x3"x1/4"x10'10" for engine room, and (1) 3"x3"x1/4"x9'5" also for engine room.
- (2) SS rods 3/4" dia x 12'7". Note: All SS is 316.

Please call with any questions you may have. Pictures of the above items available upon request. Everything listed above is currently stored in Essex, Maryland, just outside Baltimore.