Cruisers Forum
 


Join CruisersForum Today

 
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 22-08-2012, 16:52   #1
Senior Cruiser
 
bstreep's Avatar

Cruisers Forum Supporter

Join Date: Oct 2007
Location: San Antonio, TX/Port Aransas, TX
Boat: 1990 Macintosh 47, "Merlin"
Posts: 2,308
B & G Displays, processors, etc...

We have finally gotten everything off of the boat, and assembled them. Please feel free to PM me, with an email address, and I'll send pictures. FOR NOW, WE ARE SELLING IT AS A LOT. This is not the only place we have them listed, so it's possible that these could sell before I get a PM from you.

Price for the lot: $600, plus shipping. This is what a reseller is selling a SINGLE display for.

Here are the items, and last known condition:

1 Hydra 330 Display: This unit was installed inside the boat, and never saw the sun. It comes with a cover. It's in good condition - really nice.

1 Hydra 330 Display: This unit was installed at the wheel, and shows some wear and "burn in". It comes with a cover, and was covered much of the time. We did note upon removal that the LCD did not display all parts of some numbers. We were able to read it, but it's not "all there". It could also be a connection or processor problem.

4 20/20 Displays: Two were working OK (I'd consider them "fair" condition), the other two should be considered for parts only. They were very burnt in, and difficult if not impossible to read. Bezels are there, but not without cracks. Realistically, these 4 units should be considered a "windfall" in the package. They were not protected from sunlight.

1 B & G Helmstar "Hydra Processor S/N 4306549". As far as I know, this was in working condition.

1 B & G Processor "Helmstar Processor S/N 7500803. As above, this was in working condition when removed.

1 B & G Masthead Unit: This was REMOVED with a hacksaw - it should not be considered a usable unit. It was corroded onto the masthead, and that was the only way the installer could remove it. The wind cups are intact, and the unit does spin. The direction indicator is missing (broken off). This should be considered for "parts only".

10 +/- B & G cables of varying length, some with terminal boxes.

Instruction/warranty/installation manuals: 4 installation diagrams, 3 20/20 instruction bookleets, 1 Super Halcyon 3 manual, 1 Helmstar 740 manual, various other bits.
__________________
Bill Streep
San Antonio/Port Aransas, TX
bstreep is offline  
Old 23-08-2012, 10:30   #2
Registered User

Join Date: Jun 2011
Posts: 51
Re: B & G Displays, processors, etc...

actually changed mind.
mstyle8517 is offline  
Old 27-08-2012, 17:12   #3
Senior Cruiser
 
bstreep's Avatar

Cruisers Forum Supporter

Join Date: Oct 2007
Location: San Antonio, TX/Port Aransas, TX
Boat: 1990 Macintosh 47, "Merlin"
Posts: 2,308
Re: B & G Displays, processors, etc...

Bump - they are going to sell on fleabay.
__________________
Bill Streep
San Antonio/Port Aransas, TX
bstreep is offline  
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 02:53.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.