For Sale: 42ft mid cockpit world cruising sailboat in FLORIDA

[geoleo]

Originally Posted by geoleo

BREWER 12.8(42ft) CUTTER Mid cockpit aft cabin world cruising sailboat for sale in Clearwater Florida. $50k total renovation just completed. Full equipment with all top quality gear. Very comfortable and safe. Needs nothing. 13tons,60ft Isomat mast,13-6 beam, draft 4-6 board up, 9-0 board down, ICOM 802 SSB/HAM, ICOM M502VHF,Ratheon M8002 autopilot with remote, AIS, Raytheon wind ,depth and 24 mile RADAR, Dell desktop computer with 19" ACER monitor, Xantrex xm1800 watt inverter, 40 amp charger, MASE 4.5 KW diesel Generator 70 hours, 8 Trojan 125 amp deep cycle batter bank, 400 Watts Solar, 48gpd water maker Village Marine, Webasto 1600 Air Conditioner with heat, 2-120 gallon water tanks(epoxied), 75 HP Yanmar diesel 4JH3-TE 1480 hours,17" MAXPROP, New Zodiac 10-2 WAVE Dinghy, New Lewmar Hatches, 440 watts solar, Electric sheet winches, Forespar Vang, Maxwell 1200 windlass, Custom 10x8 cockpit enclosure with new side curtains,and stern arch, PSS shaft seal, new Edson steering hardware. New Mack full batten mainsail , new Mack mackpack. $115 K .

Answers to questions: The material fabric used in the new cockpit enclosure side curtains is Sunbrella Plus-a more water resistant one than marine Sunbrella.

[captainstubbie]

Bump...seems like a very nice cruiser... Still available?

Sent from my SM-N910V using Cruisers Sailing Forum mobile app

[geoleo]

Last haul out included installing new cutlass prop shaft bearing.

[Paul-Arr]

Congrats on such a nice yacht. Here's a free bump.

This seems to check every box for us...can't help shopping even though we're 3 years from leaving.

[geoleo]

Yacht is docked behind a house on Island Estates in Clearwater Beach. Rent is only $275 a month.

[geoleo]

PRICE REDUCED TO $102000 !!!!

[geoleo]

[QUOTE=geoleo;1994613]BREWER 12.8(42ft) CUTTER Mid cockpit aft cabin world cruising sailboat for sale in Clearwater Florida. $50k total renovation just completed. Full equipment with all top quality gear. Very comfortable and safe. Needs nothing. 13tons,60ft Isomat mast,13-6 beam, draft 4-6 board up, 9-0 board down, ICOM 802 SSB/HAM, ICOM M502VHF,Ratheon M8002 autopilot with remote, AIS, Raytheon wind ,depth and 24 mile RADAR, Dell desktop computer with 19" viewsonic monitor, Xantrex xm1800 watt inverter, 40 amp charger, MASE 4.5 KW diesel Generator 70 hours, 8 Trojan 125 amp deep cycle batter bank, 400 Watts Solar, 48gpd water maker village Marine, Webasto 1600 Air Conditioner with heat, 2-120 gallon water tanks(epoxied), 75 HP Yanmar diesel 4JH3-TE 1480 hours,17" MAXPROP, New Zodiac 10-2 WAVE Dinghy, New Lewmar Hatches, 440 wats solar, Electric sheet winches, Forespar Vang, Maxwell 1200 windlass, Custom 10x8 cockpit enclosure with new side curtains,and stern arch, Pss shaft seal, new Edson steering hardware. New Mack full batten mainsail , new Mack mackpack. $102 K !

[geoleo]

[QUOTE=geoleo;1994613]BREWER 12.8(42ft) CUTTER Mid cockpit aft cabin world cruising sailboat for sale in Clearwater Florida. $50k total renovation just completed. Full equipment with all top quality gear. Very comfortable and safe. Needs nothing. 13tons,60ft Isomat mast,13-6 beam, draft 4-6 board up, 9-0 board down, ICOM 802 SSB/HAM, ICOM M502VHF,Ratheon M8002 autopilot with remote, AIS, Raytheon wind ,depth and 24 mile RADAR, Dell desktop computer with 19" viewsonic monitor, Xantrex xm1800 watt inverter, 40 amp charger, MASE 4.5 KW diesel Generator 70 hours, 8 Trojan 125 amp deep cycle batter bank, 400 Watts Solar, 48gpd water maker village Marine, Webasto 1600 Air Conditioner with heat, 2-120 gallon water tanks(epoxied), 75 HP Yanmar diesel 4JH3-TE 1480 hours,17" MAXPROP, New Zodiac 10-2 WAVE Dinghy, New Lewmar Hatches, 440 wats solar, Electric sheet winches, Forespar Vang, Maxwell 1200 windlass, Custom 10x8 cockpit enclosure with new side curtains,and stern arch, Pss shaft seal, new Edson steering hardware. New Mack full batten mainsail , new Mack mackpack. $115 K

[geoleo]

Just had the WINSLOW 6 person Offshore Liferaft Model 6-SLOP recertified at Winslow's Port Charlotte FL factory Facility. They told me it cost new $6450 and is in top condition.

[geoleo]

[QUOTE=geoleo;2143907]

Originally Posted by geoleo

BREWER 12.8(42ft) CUTTER Mid cockpit aft cabin world cruising sailboat for sale in Clearwater Florida. $50k total renovation just completed. Full equipment with all top quality gear. Very comfortable and safe. Needs nothing. 13tons,60ft Isomat mast,13-6 beam, draft 4-6 board up, 9-0 board down, ICOM 802 SSB/HAM, ICOM M502VHF,Ratheon M8002 autopilot with remote, AIS, Raytheon wind ,depth and 24 mile RADAR, Dell desktop computer with 19" ACER monitor, Xantrex xm1800 watt inverter, 40 amp charger, MASE 4.5 KW diesel Generator 70 hours, 8 Trojan 125 amp deep cycle batter bank, 400 Watts Solar, 48gpd water maker village Marine, Webasto 1600 Air Conditioner with heat, 2-120 gallon water tanks(epoxied), 75 HP Yanmar diesel 4JH3-TE 1480 hours,17" MAXPROP, New Zodiac 10-2 WAVE Dinghy, New Lewmar Hatches, 440 wats solar, Electric sheet winches, Forespar Vang, Maxwell 1200 windlass, Custom 10x8 cockpit enclosure with new side curtains,and stern arch, Pss shaft seal, new Edson steering hardware. New Mack full batten mainsail , new Mack Mackpack, Winslow 6 person Offshore Liferaft Model SLOP Recertified 7/1/2016. $102 K

Updated description 7/2/16 7/2/16

[geoleo]

here are missing pics of glorious cockpit

[geoleo]

Last little thingy now attended to and am day sailing weekly on evening Sunset onshore breezes. Prospects invited if they buy dinner at Frenchys

[geoleo]

Missing pics of swim platform and stern arch added.......swim ladder is of t







ype 316 Stainless steel..

[exMaggieDrum]

I'd certainly take a look if we didn't already get our next boat. The Brewer's and Whitby's (ours) were mostly the same. The cockpit was to die for. And the engine room. Sure miss those. Good luck selling. Your price looks very reasonable from a distance.

[SecureDelivery]

Beautiful yacht.
Agree with other posters however, this is not what is colloquially known as a "protected prop"
Typically this is a rudder that is attached to the keel of the vessel at the top and bottom of the rudder, hence a "apature" or "cutout for the prop" is necessary in the leading edge of the rudder ( due to physics; two things can't be in the same place)
Other designs that have a protected prop are skeg mounted rudder designs with metal flat bar that extends from aftmost bit of keel to the skeg, hence any rope or line would in theory pass by without snarling.
Either way, a line cutter on your shaft is worth it's weight in gold.