Visit our Popular Forums

v62cobra · 10-10-2012, 09:00

Unit is new. Comes in box (foam sealed), with documentation. Color is gloss white. This is a horizontal model for mounting purposes.

Torrid Horizontal Marine Water Heaters are perfect for installation in tight quarters with restricted height yet offer all the benefits of glass-lined tanks and commercial duty construction. The 100 percent replaceable parts as well as all the installation fittings are easily accessed from the face of the water heater.

Glass lined inner tank
Foam insulation
Incoloy Sheathed Elements
Adjustable Thermostats
100% replaceable parts

Power:
240V-1500W

Description:
10 Gallon glass lined tank provides clean, hygienic containment for onboard hot water. Tanks are rated to 150 lb. PSI working pressure, and are built to A.S.M.E. specifications. Tank comes equipped with a 75 lb. PSI T & P (temperature & pressure) relief valve. 5 year warranty is included on the tank.

Element:
Stainless steel incoloy sheathed elements installed. Elements and thermostat are U.L. listed, and comply to United States Coast Guard (USCG) requirements

Heat Exchanger:
Brass inlet / outlet fitting with copper exchanger. Operable without heat exchanger if desired.

Weight: 59 lbs (horizontal model)

Warranty:
5 year

Message from MFG:

At the time of manufacture, glass lined tanks are heated to 1600+ degrees Fahrenheit. This causes the entire tank to glow red. It is then cooled as the glass is formed and bonded to the steel. The tank is then heated to 400 degrees Fahrenheit during the epoxy powder stage. Even at these extreme temperature changes, the ceramic lining will not crack. Relatively small variations of water temperature at only 170 degrees will have NO affect on the glass lining.