Water Temp in OCPN via SignalK

[deepthought]

I have my depth and water temp transducer via n2k to signalK if I check it via canboat cmd:

actisense-serial /dev/ttyUSB2 | analyzer -q -json

I see:

{"timestamp":"2018-09-20T00:33:11.411Z","prio":5,"src":105,"dst":255,"pgn":130310,"description":"Environmental Parameters","fields":{"SID":0,"Water Temperature":15.50}}
{"timestamp":"2018-09-20T00:33:11.906Z","prio":3,"src":105,"dst":255,"pgn":128267,"description":"Water Depth","fields":{"SID":0,"Depth":5.07,"Offset":0.000}}

But I can not find anywhere in SignalK or OCPN it showing the water temp?

I see the depth is showing fine in both.

Anyone have this issue or know how to fix?

Thanks

[conachair]

Maybe ask the signalk guys?

https://signalk-dev.slack.com

[deepthought]

Thanks but dont have an account there and it says "Contact the workspace administrator for an invitation"


Maybe if you can give me the info of who to contact for an invitation. Thanks

[teppokurki]

http://signalk.org/ -> http://slack-invite.signalk.org/

[BlackSea]

@deepthought


Could you try with this patch
https://github.com/free-x/n2k-signal...f0561b1348c93f

[deepthought]

@BlackSea


Yes that worked. Its now showing up.



Thanks