Cruisers Forum
 


Join CruisersForum Today

Reply
 
Thread Tools Rate Thread Display Modes
Old 21-12-2010, 13:07   #1
Registered User

Join Date: Oct 2006
Location: Norfolk UK
Boat: Hunter 34
Posts: 14
Two inputs?

I want to change to using a usb gps instead of the output from a chartplotter but also get the AIS output from a NASA ais engine that has a RS232 plug. I can get a serial port to usb cable for the AIS but the gps input will be on say Com 3 and the AIS and NMEA will come in on Com 4. I also want to display the NMEA data on the new dashboard.

Is there a way of configuring this ?

I have also just been looking at NavMonPC and the record function of nmea data looks good so would like to share the data with Opencpn.

Can anyone help?
__________________
Richard
s/v Green Dragon
HunterWanderer is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Switching Single Generator and Two Shore Power Inputs winds aloft Electrical: Batteries, Generators & Solar 8 20-08-2010 07:47



Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 03:23.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.