Cruisers Forum
 


Join CruisersForum Today

Reply
 
Thread Tools Rate Thread Display Modes
Old 18-12-2014, 12:01   #16
Registered User

Join Date: May 2014
Boat: Morgan Out Island 41
Posts: 702
Images: 2
Re: SENC file create makes OpenCPN almost unusable

That is exactly the same behaviour that I'm getting. zooming and scrolling around causes the SENC file creation. When you're rooute planning and scrolling around alot. It really starts to slow down the system alot! I use ENC charts with my IPAD and SeaIQ and it does a little bit of this type of behaviour, but it only happens when I make a really big shift in location or zoom.

So this behaviour does appear to be normal! too bad. Does the same thing happen with Rastor charts? The whole Idea of the ENC's is to improve the performance and detail when chartplotting.
__________________

__________________
pcmm is offline   Reply With Quote
Old 18-12-2014, 12:05   #17
Registered User

Join Date: Jul 2013
Location: Washington State, USA
Boat: 1983 Fu Hwa Seahorse
Posts: 86
Re: SENC file create makes OpenCPN almost unusable

Quote:
Originally Posted by jstevens View Post
Possibly this is what PCMM is experiencing.
http://youtu.be/YTkVuTnsVWo

In this capture video I perform a full database rebuild, then I start to zoom in on the entrance to Norfolk harbor. OpenCPN runs the SENC function on every zoom in. Then as I page down through the harbor the SENC function executes again.
This is what should be expected.

Instead, once you close the options dialog, close OpenCPN. Restart it with the -unit_test_1 command line flag, and it will build the SENC files for every chart that just got ingested. Depending on the hardware and size/number of charts this can take quite a while. I usually just start it and go do something else for a while.

In my experience that has worked fine.

But what PCMM is saying is that even after building the SENC files, he's still reprocessing the chart when he zooms in and out. This is not expected behavior, but I don't have an answer for it and cannot replicate on my Win7 nor Win8 machines. The log file may help.
__________________

__________________
Thanks, Matt B.
1983 Fu Hwa Seahorse
http://mvcesc.wordpress.com/
mattkab is offline   Reply With Quote
Old 18-12-2014, 12:07   #18
bcn
Registered User

Join Date: May 2011
Location: underway whenever possible
Boat: Rangeboat 39
Posts: 2,768
Re: SENC file create makes OpenCPN almost unusable

Quote:
Originally Posted by pcmm View Post
ran that command, it seems to have created the SENC files but no difference. when I zoom in and out or scroll around the same SENC file dialogue still comes up slowing down the application. Is OpenCPN not compatible with NOAA S57 ENC files?
pcmm,

this is not normal - so again: please let us see your log-file in order to get an idea what is going wrong here.
__________________
bcn is online now   Reply With Quote
Old 18-12-2014, 12:28   #19
Registered User

Join Date: May 2014
Boat: Morgan Out Island 41
Posts: 702
Images: 2
Re: SENC file create makes OpenCPN almost unusable

Here is the log file
https://www.hightail.com/download/Ul...Rnd0QTFFQmRVag
__________________
pcmm is offline   Reply With Quote
Old 18-12-2014, 12:30   #20
Registered User

Join Date: Jul 2013
Location: Washington State, USA
Boat: 1983 Fu Hwa Seahorse
Posts: 86
Re: SENC file create makes OpenCPN almost unusable

Quote:
Originally Posted by pcmm View Post
Looks like the link got truncated. Sorry, can you try once more, or run it through tinyurl.com?
__________________
Thanks, Matt B.
1983 Fu Hwa Seahorse
http://mvcesc.wordpress.com/
mattkab is offline   Reply With Quote
Old 18-12-2014, 12:41   #21
Registered User

Join Date: May 2014
Boat: Morgan Out Island 41
Posts: 702
Images: 2
Re: SENC file create makes OpenCPN almost unusable

OK, Lets try that again:

https://www.hightail.com/download/Ul...000000&s=19102
__________________
pcmm is offline   Reply With Quote
Old 18-12-2014, 15:32   #22
Registered User

Join Date: Jul 2013
Location: Washington State, USA
Boat: 1983 Fu Hwa Seahorse
Posts: 86
Re: SENC file create makes OpenCPN almost unusable

I just installed OpenCPN 3.3.2410 on a fresh Win8 machine. I then downloaded some ENC charts, rebuilt the database, restarted O with the -unit_test_1 flag, and waited for the SENC files to be built. I had no visual errors, and no repeated dialog boxes.


PCMM, from your log file it does not appear that you restarted O with the -unit_test_1 flag. Please correct me if I'm wrong.

Instructions for doing so:
  1. Open a command prompt
  2. cd C:\Program Files (x86)\OpenCPN\
  3. opencpn.exe -unit_test_1

Allow OpenCPN to run and all the charts will be processed automatically.

My logfile is pasted here:
Code:
14:09:25: 

________

14:09:25: 2014-12-18
14:09:25:  ------- Starting OpenCPN -------
14:09:25: Version 3.3.2410 Build 2014-12-10
14:09:25: wxWidgets version: wxWidgets 2.8.12
14:09:25: MemoryStatus:  mem_total: 16319 mb,  mem_initial: 9 mb
14:09:25: SData_Locn is C:\Program Files (x86)\OpenCPN\
14:09:25: Creating new Config_File: C:\ProgramData\opencpn\opencpn.ini
14:09:25: Styles loading from C:\Program Files (x86)\OpenCPN\uidata\styles.xml
14:09:25: No styles found at: C:\ProgramData\opencpn\
14:09:25: No styles found at: C:\ProgramData\opencpn\.opencpn\
14:09:25: Setting Viewpoint Lat/Lon 33.358, -79.282
14:09:25: Setting Ownship Lat/Lon 33.358, -79.282
14:09:25: Loading navobjects from navobj.xml
14:09:25: Error: can't open file 'C:\ProgramData\opencpn\navobj.xml' (error 2: the system cannot find the file specified.)
14:09:25: Done loading navobjects
14:09:25: System default Language:  en_US
14:09:25: Retrieving initial language selection from Windows Registry
2:09:25 PM: looking for catalog 'wxstd' in path 'C:\Program Files (x86)\OpenCPN\share/locale\en_US.WINDOWS-1252\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en_US.WINDOWS-1252;C:\Program Files (x86)\OpenCPN\en_US.WINDOWS-1252;C:\Program Files (x86)\OpenCPN\share/locale\en_US\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en_US;C:\Program Files (x86)\OpenCPN\en_US;C:\Program Files (x86)\OpenCPN\share/locale\en\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en;C:\Program Files (x86)\OpenCPN\en'.
2:09:25 PM: catalog file for domain 'wxstd' not found.
2:09:25 PM: looking for catalog 'wxmsw' in path 'C:\Program Files (x86)\OpenCPN\share/locale\en_US.WINDOWS-1252\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en_US.WINDOWS-1252;C:\Program Files (x86)\OpenCPN\en_US.WINDOWS-1252;C:\Program Files (x86)\OpenCPN\share/locale\en_US\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en_US;C:\Program Files (x86)\OpenCPN\en_US;C:\Program Files (x86)\OpenCPN\share/locale\en\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en;C:\Program Files (x86)\OpenCPN\en'.
2:09:25 PM: catalog file for domain 'wxmsw' not found.
2:09:25 PM: Opencpn language set to:  en_US
2:09:25 PM: looking for catalog 'opencpn' in path 'C:\Program Files (x86)\OpenCPN\share/locale\en_US.WINDOWS-1252\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en_US.WINDOWS-1252;C:\Program Files (x86)\OpenCPN\en_US.WINDOWS-1252;C:\Program Files (x86)\OpenCPN\share/locale\en_US\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en_US;C:\Program Files (x86)\OpenCPN\en_US;C:\Program Files (x86)\OpenCPN\share/locale\en\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en;C:\Program Files (x86)\OpenCPN\en'.
2:09:25 PM: catalog file for domain 'opencpn' not found.
2:09:28 PM: ChartSymbols loaded from C:\Program Files (x86)\OpenCPN\s57data\chartsymbols.xml
2:09:28 PM: Using s57data in C:\Program Files (x86)\OpenCPN\s57data
2:09:28 PM: Setting Viewpoint Lat/Lon 33.358, -79.282
2:09:28 PM: Setting Ownship Lat/Lon 33.358, -79.282
2:09:28 PM: Creating glChartCanvas
2:09:28 PM: PlugInManager searching for PlugIns in location C:\Program Files (x86)\OpenCPN\plugins
2:09:28 PM: Retrieving initial Chart Directory set from Windows Registry
2:09:28 PM: Error: Can't read value of 'HKLM\SOFTWARE\OpenCPN\ChartDirs' (error 2: the system cannot find the file specified.)
2:09:28 PM: ChartDB Cache policy:  Application target is 1024 MBytes
2:09:28 PM: Chartlist file not found, config chart dir array is empty.  Chartlist target file is:C:\ProgramData\opencpn\CHRTLIST.DAT
2:09:30 PM: PlugInManager searching for PlugIns in location C:\Program Files (x86)\OpenCPN\plugins
2:09:30 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins\dashboard_pi.dll
2:09:30 PM:   C:\Program Files (x86)\OpenCPN\plugins\dashboard_pi.dll
              API Version detected: 106
              PlugIn Version detected: 102
2:09:30 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins\grib_pi.dll
2:09:30 PM:   C:\Program Files (x86)\OpenCPN\plugins\grib_pi.dll
              API Version detected: 112
              PlugIn Version detected: 203
2:09:30 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins\logbookkonni_pi.dll
2:09:30 PM:   C:\Program Files (x86)\OpenCPN\plugins\logbookkonni_pi.dll
              API Version detected: 106
              PlugIn Version detected: 101
2:09:30 PM: PlugInManager: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins\watchdog_pi.dll
2:09:30 PM:   C:\Program Files (x86)\OpenCPN\plugins\watchdog_pi.dll
              API Version detected: 110
              PlugIn Version detected: 101
2:10:55 PM: Chart cache purge
2:10:55 PM:    
2:10:55 PM: Starting chart database Update...
2:10:55 PM: Searching directory: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT for *.kap
2:10:55 PM: Searching directory: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT for *.geo
2:10:55 PM: Searching directory: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT for *.000
2:10:55 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US1WC01M\US1WC01M.000
2:10:55 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US1WC01M\US1WC01M.000
2:10:55 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US1WC02M\US1WC02M.000
2:10:55 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US1WC02M\US1WC02M.000
2:10:55 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US1WC07M\US1WC07M.000
2:10:55 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US1WC07M\US1WC07M.000
2:10:55 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US2WC12M\US2WC12M.000
2:10:55 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US2WC12M\US2WC12M.000
2:10:55 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US3WA01M\US3WA01M.000
2:10:55 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US3WA01M\US3WA01M.000
2:10:55 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US3WA46M\US3WA46M.000
2:10:55 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US3WA46M\US3WA46M.000
2:10:55 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA10M\US4WA10M.000
2:10:55 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA10M\US4WA10M.000
2:10:55 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA11M\US4WA11M.000
2:10:55 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA11M\US4WA11M.000
2:10:55 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA30M\US4WA30M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA30M\US4WA30M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA31M\US4WA31M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA31M\US4WA31M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA34M\US4WA34M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA34M\US4WA34M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA36M\US4WA36M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA36M\US4WA36M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA04M\US5WA04M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA04M\US5WA04M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA12M\US5WA12M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA12M\US5WA12M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA13M\US5WA13M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA13M\US5WA13M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA14M\US5WA14M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA14M\US5WA14M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA15M\US5WA15M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA15M\US5WA15M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA16M\US5WA16M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA16M\US5WA16M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA17M\US5WA17M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA17M\US5WA17M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA18M\US5WA18M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA18M\US5WA18M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA19M\US5WA19M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA19M\US5WA19M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA20M\US5WA20M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA20M\US5WA20M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA21M\US5WA21M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA21M\US5WA21M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA22M\US5WA22M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA22M\US5WA22M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA23M\US5WA23M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA23M\US5WA23M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA24M\US5WA24M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA24M\US5WA24M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA26M\US5WA26M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA26M\US5WA26M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA27M\US5WA27M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA27M\US5WA27M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA28M\US5WA28M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA28M\US5WA28M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA29M\US5WA29M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA29M\US5WA29M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA30M\US5WA30M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA30M\US5WA30M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA31M\US5WA31M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA31M\US5WA31M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA32M\US5WA32M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA32M\US5WA32M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA33M\US5WA33M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA33M\US5WA33M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA40M\US5WA40M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA40M\US5WA40M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA41M\US5WA41M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA41M\US5WA41M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA42M\US5WA42M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA42M\US5WA42M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA43M\US5WA43M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA43M\US5WA43M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA44M\US5WA44M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA44M\US5WA44M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA45M\US5WA45M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA45M\US5WA45M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA50M\US5WA50M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA50M\US5WA50M.000
2:10:56 PM: Loading chart data for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA51M\US5WA51M.000
2:10:56 PM:    Adding chart file: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA51M\US5WA51M.000
2:10:56 PM: Searching directory: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT for *.s57
2:10:56 PM: Searching directory: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT for 00300000.a
2:10:56 PM: Finished chart database Update
2:10:56 PM:    
2:10:56 PM: Chart cache purge
2:10:56 PM: Chart cache purge
2:10:56 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US1WC07M\US1WC07M.000
2:10:56 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US1WC07M\US1WC07M.000 to C:\ProgramData\opencpn\SENC\US1WC07M.S57
2:10:56 PM: Preparing to apply ENC updates, target final update is   3.
2:10:56 PM: Loading World Chart Q=0 in 0 ms.
2:10:56 PM: Background world map loaded from GSHHS datafiles found in: C:\Program Files (x86)\OpenCPN\gshhs\
2:10:57 PM: GPS Watchdog Timeout is: 6 sec.
2:10:58 PM: LOGBOOK:  2014-12-18 22:10:58 UTC  DR Lat   39.54167 Lon -148.16667
2:10:59 PM:    ***GPS Watchdog timeout at Lat:39.5417   Lon: -148.167
2:11:02 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US1WC01M\US1WC01M.000
2:11:02 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US1WC01M\US1WC01M.000 to C:\ProgramData\opencpn\SENC\US1WC01M.S57
2:11:02 PM: Preparing to apply ENC updates, target final update is   6.
2:11:04 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US1WC02M\US1WC02M.000
2:11:04 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US1WC02M\US1WC02M.000 to C:\ProgramData\opencpn\SENC\US1WC02M.S57
2:11:04 PM: Preparing to apply ENC updates, target final update is  15.
2:11:14 PM: opencpn::MyFrame exiting cleanly.
2:11:14 PM: Chart cache purge
2:11:14 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins\dashboard_pi.dll
2:11:14 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins\grib_pi.dll
2:11:14 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins\logbookkonni_pi.dll
2:11:14 PM: PlugInManager: UnLoading PlugIn: C:\Program Files (x86)\OpenCPN\plugins\watchdog_pi.dll
2:11:14 PM: Chart cache purge
2:11:14 PM: LOGBOOK:  2014-12-18 22:11:14 UTC OFF: Lat   47.28676 Lon -122.46152
2:11:14 PM: opencpn::MyApp exiting cleanly...

14:12:03: 

________

14:12:03: 2014-12-18
14:12:03:  ------- Starting OpenCPN -------
14:12:03: Version 3.3.2410 Build 2014-12-10
14:12:03: wxWidgets version: wxWidgets 2.8.12
14:12:03: MemoryStatus:  mem_total: 16319 mb,  mem_initial: 9 mb
14:12:03: SData_Locn is C:\Program Files (x86)\OpenCPN\
14:12:03: Using existing Config_File: C:\ProgramData\opencpn\opencpn.ini
14:12:03: Styles loading from C:\Program Files (x86)\OpenCPN\uidata\styles.xml
14:12:03: No styles found at: C:\ProgramData\opencpn\
14:12:03: No styles found at: C:\ProgramData\opencpn\.opencpn\
14:12:03: Setting Viewpoint Lat/Lon 47.6488, -122.87
14:12:03: Setting Ownship Lat/Lon 47.2868, -122.462
14:12:03: Loading navobjects from navobj.xml
14:12:03: Done loading navobjects
14:12:03: System default Language:  en_US
2:12:03 PM: looking for catalog 'wxstd' in path 'C:\Program Files (x86)\OpenCPN\share/locale\en_US.WINDOWS-1252\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en_US.WINDOWS-1252;C:\Program Files (x86)\OpenCPN\en_US.WINDOWS-1252;C:\Program Files (x86)\OpenCPN\share/locale\en_US\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en_US;C:\Program Files (x86)\OpenCPN\en_US;C:\Program Files (x86)\OpenCPN\share/locale\en\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en;C:\Program Files (x86)\OpenCPN\en'.
2:12:03 PM: catalog file for domain 'wxstd' not found.
2:12:03 PM: looking for catalog 'wxmsw' in path 'C:\Program Files (x86)\OpenCPN\share/locale\en_US.WINDOWS-1252\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en_US.WINDOWS-1252;C:\Program Files (x86)\OpenCPN\en_US.WINDOWS-1252;C:\Program Files (x86)\OpenCPN\share/locale\en_US\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en_US;C:\Program Files (x86)\OpenCPN\en_US;C:\Program Files (x86)\OpenCPN\share/locale\en\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en;C:\Program Files (x86)\OpenCPN\en'.
2:12:03 PM: catalog file for domain 'wxmsw' not found.
2:12:03 PM: Opencpn language set to:  en_US
2:12:03 PM: looking for catalog 'opencpn' in path 'C:\Program Files (x86)\OpenCPN\share/locale\en_US.WINDOWS-1252\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en_US.WINDOWS-1252;C:\Program Files (x86)\OpenCPN\en_US.WINDOWS-1252;C:\Program Files (x86)\OpenCPN\share/locale\en_US\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en_US;C:\Program Files (x86)\OpenCPN\en_US;C:\Program Files (x86)\OpenCPN\share/locale\en\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en;C:\Program Files (x86)\OpenCPN\en'.
2:12:03 PM: catalog file for domain 'opencpn' not found.
2:12:05 PM: ChartSymbols loaded from C:\Program Files (x86)\OpenCPN\s57data\chartsymbols.xml
2:12:05 PM: Using s57data in C:\Program Files (x86)\OpenCPN\s57data
2:12:05 PM: Setting Viewpoint Lat/Lon 47.6488, -122.87
2:12:05 PM: Setting Ownship Lat/Lon 47.2868, -122.462
2:12:05 PM: Creating glChartCanvas
2:12:05 PM: PlugInManager searching for PlugIns in location C:\Program Files (x86)\OpenCPN\plugins
2:12:05 PM: ChartDB Cache policy:  Application target is 1024 MBytes
2:12:05 PM: Loading chart db version: V018
2:12:05 PM: Chartdb: Chart directory list follows
2:12:05 PM:   Chart directory #0: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT
2:12:05 PM: GPS Watchdog Timeout is: 6 sec.
2:12:05 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US1WC01M\US1WC01M.000
2:12:05 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US1WC07M\US1WC07M.000
2:12:05 PM: Loading World Chart Q=0 in 0 ms.
2:12:05 PM: Background world map loaded from GSHHS datafiles found in: C:\Program Files (x86)\OpenCPN\gshhs\
2:12:07 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US1WC02M\US1WC02M.000
2:12:07 PM:    ***GPS Watchdog timeout at Lat:47.2868   Lon: -122.462
2:12:09 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US2WC12M\US2WC12M.000
2:12:09 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US2WC12M\US2WC12M.000 to C:\ProgramData\opencpn\SENC\US2WC12M.S57
2:12:09 PM: Preparing to apply ENC updates, target final update is   4.
2:12:11 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US3WA01M\US3WA01M.000
2:12:11 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US3WA01M\US3WA01M.000 to C:\ProgramData\opencpn\SENC\US3WA01M.S57
2:12:11 PM: Preparing to apply ENC updates, target final update is   3.
2:12:14 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US3WA46M\US3WA46M.000
2:12:14 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US3WA46M\US3WA46M.000 to C:\ProgramData\opencpn\SENC\US3WA46M.S57
2:12:14 PM: Preparing to apply ENC updates, target final update is   8.
2:12:19 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA10M\US4WA10M.000
2:12:19 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA10M\US4WA10M.000 to C:\ProgramData\opencpn\SENC\US4WA10M.S57
2:12:19 PM: Preparing to apply ENC updates, target final update is   7.
2:12:24 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA11M\US4WA11M.000
2:12:24 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA11M\US4WA11M.000 to C:\ProgramData\opencpn\SENC\US4WA11M.S57
2:12:24 PM: Preparing to apply ENC updates, target final update is   5.
2:12:28 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA30M\US4WA30M.000
2:12:28 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA30M\US4WA30M.000 to C:\ProgramData\opencpn\SENC\US4WA30M.S57
2:12:28 PM: Preparing to apply ENC updates, target final update is   3.
2:12:31 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA31M\US4WA31M.000
2:12:31 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA31M\US4WA31M.000 to C:\ProgramData\opencpn\SENC\US4WA31M.S57
2:12:35 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA34M\US4WA34M.000
2:12:35 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA34M\US4WA34M.000 to C:\ProgramData\opencpn\SENC\US4WA34M.S57
2:12:35 PM: Preparing to apply ENC updates, target final update is   6.
2:12:38 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA36M\US4WA36M.000
2:12:38 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA36M\US4WA36M.000 to C:\ProgramData\opencpn\SENC\US4WA36M.S57
2:12:38 PM: Preparing to apply ENC updates, target final update is   2.
2:12:41 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA04M\US5WA04M.000
2:12:41 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA04M\US5WA04M.000 to C:\ProgramData\opencpn\SENC\US5WA04M.S57
2:12:41 PM: Preparing to apply ENC updates, target final update is   2.
2:12:43 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA17M\US5WA17M.000
2:12:43 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA17M\US5WA17M.000 to C:\ProgramData\opencpn\SENC\US5WA17M.S57
2:12:43 PM: Preparing to apply ENC updates, target final update is   6.
2:12:44 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA12M\US5WA12M.000
2:12:44 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA12M\US5WA12M.000 to C:\ProgramData\opencpn\SENC\US5WA12M.S57
2:12:44 PM: Preparing to apply ENC updates, target final update is   8.
2:12:46 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA13M\US5WA13M.000
2:12:46 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA13M\US5WA13M.000 to C:\ProgramData\opencpn\SENC\US5WA13M.S57
2:12:46 PM: Preparing to apply ENC updates, target final update is   5.
2:12:50 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA14M\US5WA14M.000
2:12:50 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA14M\US5WA14M.000 to C:\ProgramData\opencpn\SENC\US5WA14M.S57
2:12:50 PM: Preparing to apply ENC updates, target final update is   4.
2:12:51 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA18M\US5WA18M.000
2:12:51 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA18M\US5WA18M.000 to C:\ProgramData\opencpn\SENC\US5WA18M.S57
2:12:51 PM: Preparing to apply ENC updates, target final update is   1.
2:12:55 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA15M\US5WA15M.000
2:12:55 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA15M\US5WA15M.000 to C:\ProgramData\opencpn\SENC\US5WA15M.S57
2:12:55 PM: Preparing to apply ENC updates, target final update is   7.
2:12:58 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA16M\US5WA16M.000
2:12:58 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA16M\US5WA16M.000 to C:\ProgramData\opencpn\SENC\US5WA16M.S57
2:12:58 PM: Preparing to apply ENC updates, target final update is   2.
2:13:02 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA27M\US5WA27M.000
2:13:02 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA27M\US5WA27M.000 to C:\ProgramData\opencpn\SENC\US5WA27M.S57
2:13:02 PM: Preparing to apply ENC updates, target final update is   1.
2:13:03 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA19M\US5WA19M.000
2:13:03 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA19M\US5WA19M.000 to C:\ProgramData\opencpn\SENC\US5WA19M.S57
2:13:03 PM: Preparing to apply ENC updates, target final update is  11.
2:13:04 PM: LOGBOOK:  2014-12-18 22:13:04 UTC  DR Lat   47.28680 Lon -122.46150
2:13:05 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA20M\US5WA20M.000
2:13:05 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA20M\US5WA20M.000 to C:\ProgramData\opencpn\SENC\US5WA20M.S57
2:13:05 PM: Preparing to apply ENC updates, target final update is   2.
2:13:07 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA21M\US5WA21M.000
2:13:07 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA21M\US5WA21M.000 to C:\ProgramData\opencpn\SENC\US5WA21M.S57
2:13:07 PM: Preparing to apply ENC updates, target final update is   4.
2:13:08 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA22M\US5WA22M.000
2:13:08 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA22M\US5WA22M.000 to C:\ProgramData\opencpn\SENC\US5WA22M.S57
2:13:08 PM: Preparing to apply ENC updates, target final update is   3.
2:13:11 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA23M\US5WA23M.000
2:13:11 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA23M\US5WA23M.000 to C:\ProgramData\opencpn\SENC\US5WA23M.S57
2:13:11 PM: Preparing to apply ENC updates, target final update is   5.
2:13:13 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA24M\US5WA24M.000
2:13:13 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA24M\US5WA24M.000 to C:\ProgramData\opencpn\SENC\US5WA24M.S57
2:13:15 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA26M\US5WA26M.000
2:13:15 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA26M\US5WA26M.000 to C:\ProgramData\opencpn\SENC\US5WA26M.S57
2:13:15 PM: Preparing to apply ENC updates, target final update is   2.
2:13:18 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA28M\US5WA28M.000
2:13:18 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA28M\US5WA28M.000 to C:\ProgramData\opencpn\SENC\US5WA28M.S57
2:13:18 PM: Preparing to apply ENC updates, target final update is   9.
2:13:21 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA29M\US5WA29M.000
2:13:21 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA29M\US5WA29M.000 to C:\ProgramData\opencpn\SENC\US5WA29M.S57
2:13:21 PM: Preparing to apply ENC updates, target final update is   3.
2:13:22 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA30M\US5WA30M.000
2:13:22 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA30M\US5WA30M.000 to C:\ProgramData\opencpn\SENC\US5WA30M.S57
2:13:23 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA31M\US5WA31M.000
2:13:23 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA31M\US5WA31M.000 to C:\ProgramData\opencpn\SENC\US5WA31M.S57
2:13:27 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA32M\US5WA32M.000
2:13:27 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA32M\US5WA32M.000 to C:\ProgramData\opencpn\SENC\US5WA32M.S57
2:13:27 PM: Preparing to apply ENC updates, target final update is   1.
2:13:31 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA33M\US5WA33M.000
2:13:31 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA33M\US5WA33M.000 to C:\ProgramData\opencpn\SENC\US5WA33M.S57
2:13:31 PM: Preparing to apply ENC updates, target final update is   4.
2:13:31 PM:    Warning 1: While applying update 2, an update to RCNM=100,RCID=657 failed.

2:13:32 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA40M\US5WA40M.000
2:13:32 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA40M\US5WA40M.000 to C:\ProgramData\opencpn\SENC\US5WA40M.S57
2:13:32 PM: Preparing to apply ENC updates, target final update is   3.
2:13:36 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA41M\US5WA41M.000
2:13:36 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA41M\US5WA41M.000 to C:\ProgramData\opencpn\SENC\US5WA41M.S57
2:13:36 PM: Preparing to apply ENC updates, target final update is   6.
2:13:38 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA42M\US5WA42M.000
2:13:38 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA42M\US5WA42M.000 to C:\ProgramData\opencpn\SENC\US5WA42M.S57
2:13:38 PM: Preparing to apply ENC updates, target final update is   4.
2:13:44 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA43M\US5WA43M.000
2:13:44 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA43M\US5WA43M.000 to C:\ProgramData\opencpn\SENC\US5WA43M.S57
2:13:44 PM: Preparing to apply ENC updates, target final update is   5.
2:13:47 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA44M\US5WA44M.000
2:13:47 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA44M\US5WA44M.000 to C:\ProgramData\opencpn\SENC\US5WA44M.S57
2:13:49 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA45M\US5WA45M.000
2:13:49 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA45M\US5WA45M.000 to C:\ProgramData\opencpn\SENC\US5WA45M.S57
2:13:50 PM: Preparing to apply ENC updates, target final update is   7.
2:13:52 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA50M\US5WA50M.000
2:13:52 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA50M\US5WA50M.000 to C:\ProgramData\opencpn\SENC\US5WA50M.S57
2:13:52 PM: Preparing to apply ENC updates, target final update is   2.
2:13:54 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA51M\US5WA51M.000
2:13:54 PM: Building SENC file for C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA51M\US5WA51M.000 to C:\ProgramData\opencpn\SENC\US5WA51M.S57
2:13:54 PM: Preparing to apply ENC updates, target final update is   6.
2:14:34 PM: opencpn::MyFrame exiting cleanly.
2:14:34 PM: Chart cache purge
2:14:34 PM: Chart cache purge
2:14:34 PM: LOGBOOK:  2014-12-18 22:14:34 UTC OFF: Lat   47.28680 Lon -122.46150
2:14:34 PM: opencpn::MyApp exiting cleanly...

14:14:40: 

________

14:14:40: 2014-12-18
14:14:40:  ------- Starting OpenCPN -------
14:14:40: Version 3.3.2410 Build 2014-12-10
14:14:40: wxWidgets version: wxWidgets 2.8.12
14:14:40: MemoryStatus:  mem_total: 16319 mb,  mem_initial: 9 mb
14:14:40: SData_Locn is C:\Program Files (x86)\OpenCPN\
14:14:40: Using existing Config_File: C:\ProgramData\opencpn\opencpn.ini
14:14:40: Styles loading from C:\Program Files (x86)\OpenCPN\uidata\styles.xml
14:14:40: No styles found at: C:\ProgramData\opencpn\
14:14:40: No styles found at: C:\ProgramData\opencpn\.opencpn\
14:14:41: Setting Viewpoint Lat/Lon 47.2868, -122.462
14:14:41: Setting Ownship Lat/Lon 47.2868, -122.462
14:14:41: Loading navobjects from navobj.xml
14:14:41: Done loading navobjects
14:14:41: System default Language:  en_US
2:14:41 PM: looking for catalog 'wxstd' in path 'C:\Program Files (x86)\OpenCPN\share/locale\en_US.WINDOWS-1252\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en_US.WINDOWS-1252;C:\Program Files (x86)\OpenCPN\en_US.WINDOWS-1252;C:\Program Files (x86)\OpenCPN\share/locale\en_US\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en_US;C:\Program Files (x86)\OpenCPN\en_US;C:\Program Files (x86)\OpenCPN\share/locale\en\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en;C:\Program Files (x86)\OpenCPN\en'.
2:14:41 PM: catalog file for domain 'wxstd' not found.
2:14:41 PM: looking for catalog 'wxmsw' in path 'C:\Program Files (x86)\OpenCPN\share/locale\en_US.WINDOWS-1252\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en_US.WINDOWS-1252;C:\Program Files (x86)\OpenCPN\en_US.WINDOWS-1252;C:\Program Files (x86)\OpenCPN\share/locale\en_US\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en_US;C:\Program Files (x86)\OpenCPN\en_US;C:\Program Files (x86)\OpenCPN\share/locale\en\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en;C:\Program Files (x86)\OpenCPN\en'.
2:14:41 PM: catalog file for domain 'wxmsw' not found.
2:14:41 PM: Opencpn language set to:  en_US
2:14:41 PM: looking for catalog 'opencpn' in path 'C:\Program Files (x86)\OpenCPN\share/locale\en_US.WINDOWS-1252\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en_US.WINDOWS-1252;C:\Program Files (x86)\OpenCPN\en_US.WINDOWS-1252;C:\Program Files (x86)\OpenCPN\share/locale\en_US\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en_US;C:\Program Files (x86)\OpenCPN\en_US;C:\Program Files (x86)\OpenCPN\share/locale\en\LC_MESSAGES;C:\Program Files (x86)\OpenCPN\share/locale\;C:\Program Files (x86)\OpenCPN\share/locale\en;C:\Program Files (x86)\OpenCPN\en'.
2:14:41 PM: catalog file for domain 'opencpn' not found.
2:14:42 PM: ChartSymbols loaded from C:\Program Files (x86)\OpenCPN\s57data\chartsymbols.xml
2:14:42 PM: Using s57data in C:\Program Files (x86)\OpenCPN\s57data
2:14:42 PM: Setting Viewpoint Lat/Lon 47.2868, -122.462
2:14:42 PM: Setting Ownship Lat/Lon 47.2868, -122.462
2:14:42 PM: Creating glChartCanvas
2:14:42 PM: PlugInManager searching for PlugIns in location C:\Program Files (x86)\OpenCPN\plugins
2:14:42 PM: ChartDB Cache policy:  Application target is 1024 MBytes
2:14:42 PM: Loading chart db version: V018
2:14:42 PM: Chartdb: Chart directory list follows
2:14:42 PM:   Chart directory #0: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT
2:14:42 PM: GPS Watchdog Timeout is: 6 sec.
2:14:42 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA22M\US5WA22M.000
2:14:44 PM:    ***GPS Watchdog timeout at Lat:47.2868   Lon: -122.462
2:14:49 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA18M\US5WA18M.000
2:14:49 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA10M\US4WA10M.000
2:14:52 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US3WA46M\US3WA46M.000
2:14:52 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US2WC12M\US2WC12M.000
2:14:55 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA27M\US5WA27M.000
2:15:00 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA11M\US4WA11M.000
2:15:00 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA17M\US5WA17M.000
2:15:00 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA12M\US5WA12M.000
2:15:00 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA13M\US5WA13M.000
2:15:04 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA14M\US5WA14M.000
2:15:10 PM: Chart cache purge
2:15:10 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA17M\US5WA17M.000
2:15:10 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA11M\US4WA11M.000
2:15:11 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA12M\US5WA12M.000
2:15:11 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA13M\US5WA13M.000
2:15:12 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA14M\US5WA14M.000
2:15:13 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA18M\US5WA18M.000
2:15:13 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA10M\US4WA10M.000
2:15:13 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US3WA46M\US3WA46M.000
2:15:14 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US2WC12M\US2WC12M.000
2:15:18 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA15M\US5WA15M.000
2:15:26 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US1WC01M\US1WC01M.000
2:15:26 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US1WC02M\US1WC02M.000
2:15:30 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US3WA01M\US3WA01M.000
2:15:30 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA30M\US4WA30M.000
2:15:30 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US4WA31M\US4WA31M.000
2:15:31 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US5WA45M\US5WA45M.000
2:15:38 PM: opencpn::MyFrame exiting cleanly.
2:15:38 PM: Chart cache purge
2:15:38 PM: Chart cache purge
2:15:38 PM: LOGBOOK:  2014-12-18 22:15:38 UTC OFF: Lat   47.28680 Lon -122.46150
2:15:38 PM: opencpn::MyApp exiting cleanly...
One difference is that my log file states that the system Finished chart database Update, while pcmm's does not.
Mine:
Code:
2:10:56 PM: Searching directory: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT for *.s57
2:10:56 PM: Searching directory: C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT for 00300000.a
2:10:56 PM: Finished chart database Update
2:10:56 PM:    
2:10:56 PM: Chart cache purge
2:10:56 PM: Chart cache purge
2:10:56 PM: Initializing Chart C:\Program Files (x86)\OpenCPN\Charts\ENC_ROOT\US1WC07M\US1WC07M.000
pcmm:
Code:
3:58:14 PM: Searching directory: C:\Charts for *.s57
3:58:14 PM: Searching directory: C:\Charts for 00300000.a
3:58:14 PM: Initializing Chart C:\Charts\US1PO02M\US1PO02M.000
3:58:14 PM: Building SENC file for C:\Charts\US1PO02M\US1PO02M.000 to C:\ProgramData\opencpn\SENC\US1PO02M.S57
3:58:14 PM: GPS Watchdog Timeout is: 6 sec.
3:58:15 PM: Loading World Chart Q=0 in 0 ms.
3:58:15 PM: Background world map loaded from GSHHS datafiles found in: C:\Program Files (x86)\OpenCPN\gshhs\
3:58:16 PM: LOGBOOK:  2014-12-17 20:58:16 UTC  DR Lat   16.87500 Lon -135.25000
3:58:17 PM:    ***GPS Watchdog timeout at Lat:16.875   Lon: -135.25
3:58:20 PM: Initializing Chart C:\Charts\US1WC07M\US1WC07M.000
__________________
Thanks, Matt B.
1983 Fu Hwa Seahorse
http://mvcesc.wordpress.com/
mattkab is offline   Reply With Quote
Old 18-12-2014, 17:25   #23
Registered User

Join Date: May 2014
Boat: Morgan Out Island 41
Posts: 702
Images: 2
Re: SENC file create makes OpenCPN almost unusable

I ran that command prompt exactly as you described. I closed the GUI of O, then went to command prompt, change to the program directory and then ran that command as listed. OpenCPN started then did all that SENC work and when it appeared to have finished, it closed OpenCPN and reopened it. Same result
__________________
pcmm is offline   Reply With Quote
Old 18-12-2014, 19:54   #24
Marine Service Provider
 
bdbcat's Avatar

Join Date: Mar 2008
Posts: 4,884
Re: SENC file create makes OpenCPN almost unusable

pcmm...

1. When you ran the "unit test 1", how long did it take to finish?

2. When you next opened OCPN, without panning or zooming, did it start a SENC build immediately? Or did a vector chart display normally?

3. If you look in your SENC file directory, do you see files with names like
C:\ProgramData\opencpn\SENC\US1PO02M.S57
How many are there?

Thanks
Dave



""
__________________
bdbcat is offline   Reply With Quote
Old 19-12-2014, 07:32   #25
Registered User

Join Date: May 2014
Boat: Morgan Out Island 41
Posts: 702
Images: 2
Re: SENC file create makes OpenCPN almost unusable

Quote:
Originally Posted by bdbcat View Post
pcmm...

1. When you ran the "unit test 1", how long did it take to finish?

2. When you next opened OCPN, without panning or zooming, did it start a SENC build immediately? Or did a vector chart display normally?

3. If you look in your SENC file directory, do you see files with names like
C:\ProgramData\opencpn\SENC\US1PO02M.S57
How many are there?

Thanks
Dave


""
1. the first time I ran "Unit test 1" it finished in about 15 minutes ( that was in 3.2.2) Now that I have updated to the latest beta the "Unit Test 1" has been running for over and hour and is still going so I guess this feature wasn't working properly in the previous versions as its never before taken longer than 20 minutes with the same set of charts loaded.

2. I'll let you know when the Unit Test finishes...still waiting for it to finish

3. In the C:\ProgramData\opencpn\SENC\ there are currently 2096 files split between *.s57 files and *.bmp files
__________________
pcmm is offline   Reply With Quote
Old 19-12-2014, 09:07   #26
Registered User

Join Date: May 2014
Boat: Morgan Out Island 41
Posts: 702
Images: 2
Re: SENC file create makes OpenCPN almost unusable

The process finally finished and OpenCPN now behaves properly!!! Looks like 3.3.x fixed this bug!!! (I've tried to use OpenCPN several times with different versions and always had this issue until this version)!!! Now on to see what cool plugins are available!

Thanks to everyone for all their help and suggestions!

Merry Christmas to all!
__________________
pcmm is offline   Reply With Quote
Old 19-12-2014, 10:25   #27
Registered User

Join Date: Jul 2013
Location: Washington State, USA
Boat: 1983 Fu Hwa Seahorse
Posts: 86
Re: SENC file create makes OpenCPN almost unusable

Excellent!!!

Merry Christmas!
__________________
Thanks, Matt B.
1983 Fu Hwa Seahorse
http://mvcesc.wordpress.com/
mattkab is offline   Reply With Quote
Old 21-12-2014, 08:41   #28
Registered User

Join Date: Jun 2010
Location: St. Petersburg, Florida
Boat: Gemini 3200
Posts: 702
Re: SENC file create makes OpenCPN almost unusable

Quote:
Originally Posted by pcmm View Post
The old Seaclear chart plotter that I used 15 years ago handled these charts much better.
SeaClear only works with raster charts, which don't use SENC files. US charts are available in either raster (RNC) or vector (ENC) format. If you just use RNCs you won't have the delay associated with building the SENC files.

Fabbian
__________________

__________________
fgd3 is offline   Reply With Quote
Reply

Tags
enc, opencpn

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Create A Gpx File From Celestial Navigation Data? sdowney717 OpenCPN 10 24-10-2012 00:31
3.0.0 : make package : bad file right after installing the deb file manuprenlair OpenCPN 1 12-06-2012 05:17
How to Convert "*.route" Route File into ".*wpt" File To Be Used in Maxsea V.10 doiroda Navigation 6 10-07-2011 00:53
Unusable Anchor Roller Raggedy Man Construction, Maintenance & Refit 1 18-01-2009 08:36



Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 13:27.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.