Cruisers Forum
 


Join CruisersForum Today

Reply
 
Thread Tools Rate Thread Display Modes
Old 10-06-2014, 13:47   #76
Registered User
 
Gilletarom's Avatar

Join Date: Mar 2010
Location: France
Boat: 10.50 mètres
Posts: 2,100
Re: Sean Depagnier's Plugins

Hello Sean, Hello RGleason,

I re-install climatology.

1° I note that the exe is correctly named but not the dll.

2° See the first screen copy here join. See specially the configuration that I choice. At this time, I check the checkbox "vent" (Wind). Then "Bilding isobar map" window is openned but nothing occur. And it is impossible to close these window and impossible to close any of the two other windows.
The only possibility is to shutdown O. But O i blocked and then O crash ....

3° I change some choice but this do not change anything. When the window "Bilding isbar map" is opened, O is blocked and the only choice is to shutdown O that crash.

Best regards. Gilletarom
Attached Thumbnails
Click image for larger version

Name:	2014-06-10_Climatology_Configuration.jpg
Views:	88
Size:	58.0 KB
ID:	82805   Click image for larger version

Name:	2014-06-10_Climatology_Configuration_2.jpg
Views:	87
Size:	56.8 KB
ID:	82806  

__________________

__________________
Gilletarom is offline   Reply With Quote
Old 10-06-2014, 21:21   #77
Registered User
 
rgleason's Avatar

Join Date: Mar 2012
Location: Boston, MA
Boat: 1981 Bristol 32 Sloop
Posts: 7,646
Re: Sean Depagnier's Plugins

Yes, Gille.. the problem is compilation of isobars. We see the Isobar prograss has stopped and does not complete. Then select "reduce" or "minimize" at upper right, so Opencpn goes to the bottom task bar. Then open it and "maximize" and the progress bar is gone with the
data now written. Troubles with wind, sea depth and pressure with progress bar choking up.

The git version being used is not the most current. I stepped back the plugin to
"80e3b39 add day support" and compiled that. --- But you are saying it still has Isobar progress bar problems. Try the "minimize" Opencpn and then "maximize trick and please advise.

Also try setting wind to normal or rough for a start.

You also think the dll should have the same name? Gosh what a lot of typing each time...

__________________

__________________
rgleason is offline   Reply With Quote
Old 11-06-2014, 00:44   #78
Registered User
 
Gilletarom's Avatar

Join Date: Mar 2010
Location: France
Boat: 10.50 mètres
Posts: 2,100
Re: Sean Depagnier's Plugins

Hello,

Quote:
Originally Posted by rgleason View Post
.....
Then select "reduce" or "minimize" at upper right, so Opencpn goes to the bottom task bar. Then open it and "maximize" and the progress bar is gone with the
data now written. .....
.....
You also think the dll should have the same name? Gosh what a lot of typing each time...

1° Gosh what a lot of testing each time... !!!

2° I try to minimize and maximize O. In this case, no problem. No crash. Strange !!!

3° Mystake in pot file : "Celcius" -----> "Celsius"

4° There are many new items in english. Big work to translate from English to French. Please, update the pot file.

5° See screen copy join :

What are the "#1R" that we can see ? They appear to some position of the mouse on the map.

B.R. Gilletarom
Attached Thumbnails
Click image for larger version

Name:	2014-06-11_Diese_1_R.jpg
Views:	78
Size:	32.0 KB
ID:	82860  
__________________
Gilletarom is offline   Reply With Quote
Old 11-06-2014, 04:38   #79
Registered User
 
rgleason's Avatar

Join Date: Mar 2012
Location: Boston, MA
Boat: 1981 Bristol 32 Sloop
Posts: 7,646
Re: Sean Depagnier's Plugins

Standalone Plugin Compilation - Attempt to format the Release names, in accord with standards.
=======================

cd C:\o-plugin\celestial_navigation_pi\build\release
Rename dll to celestial_navigation_win32_pi1.8_v1.0_ov331731_pi. dll

Cut above file and paste to C:\o-plugin\celestial_navigation_pi\build\_CPack_Packag es\win32\NSIS\celestial_navigation_pi-1.8-win32\plugins
and delete celestial_navigation_pi.dll

cd C:\o-plugin\celestial_navigation_pi\build
Type cpack <enter>

cd C:\o-plugin\celestial_navigation_pi\build\_CPack_Packag es\win32\NSIS
Rename exe to
celestial_navigation_win32_pi1.8_v1.0_ov331731_pi. exe

Then try to install
celestial_navigation_win32_pi1.8_v1.0_ov331731_pi. exe to Opencpn3.3.1731.
1. The
celestial_navigation_pi/data file is installed properly.
2. celestial_navigation_pi.dll is installed.

This strategy did not work.
It would be nice if the "cpack" command had an argument like "--formatname" which would take the Version number and Plugin API and name the plugin dll and exe accordingly. I leave this for the programmers to figure out.

For the time being I may rename the exe if I have time, until we get to the final truely public version.


__________________
rgleason is offline   Reply With Quote
Old 11-06-2014, 04:47   #80
Registered User
 
rgleason's Avatar

Join Date: Mar 2012
Location: Boston, MA
Boat: 1981 Bristol 32 Sloop
Posts: 7,646
Re: Sean Depagnier's Plugins

Sean is taking a well deserved sail. I will try to stand in.

Gille.. wrote:
Quote:

1° Gosh what a lot of testing each time...
!!! - Touche!

2° I try to minimize and maximize O. In this case, no problem. No crash. Strange !!! - Yes! If maybe two of us explained this to Sean, he'd know what the problem is. You just minimize the screen and O shrinks down to the taskbar and then maximize O and the problem has gone away. I is almost as if the screen is frozen and does not rewrite during an isobar progress bar, in later versions it gets worse. Also the "cancel" does not operate, its kind of frozen, so the screen goes dead, can't exit O normally. Its a pain in the XXX if you don't know the "minimize" "maximize" trick.

3° Mystake in pot file : "Celcius" -----> "Celsius" - Yes, it is a "mistake", but I like the mystake.

4° There are many new items in english. Big work to translate from English to French. Please, update the pot file. - ok how is that done? Maybe you can describe this process or direct me to the manual where it shows the process....

5° See screen copy join :

What are the "#1R" that we can see ? They appear to some position of the mouse on the map. - These have been there from day one, but you bring up a good point, perhaps they should say NA (not available)
__________________
rgleason is offline   Reply With Quote
Old 11-06-2014, 04:52   #81
Registered User
 
rgleason's Avatar

Join Date: Mar 2012
Location: Boston, MA
Boat: 1981 Bristol 32 Sloop
Posts: 7,646
Re: Sean Depagnier's Plugins

By the way Gille... since you are so through, which is great, if you are testing Weather_routing with Climatology, please put Climatology on "Average" because other settings do not at present work and will just fail
__________________
rgleason is offline   Reply With Quote
Old 11-06-2014, 05:06   #82
Registered User
 
rgleason's Avatar

Join Date: Mar 2012
Location: Boston, MA
Boat: 1981 Bristol 32 Sloop
Posts: 7,646
Re: Sean Depagnier's Plugins

Standalone Plugin Compilation - Attempt to format the Release names, in accord with standards.
=======================

cd C:\o-plugin\celestial_navigation_pi\build\release
Rename dll to celestial_navigation_win32_pi1.8_v1.0_ov331731_pi. dll

Cut above file and paste to C:\o-plugin\celestial_navigation_pi\build\_CPack_Packag es\win32\NSIS\celestial_navigation_pi-1.8-win32\plugins
and delete celestial_navigation_pi.dll

cd C:\o-plugin\celestial_navigation_pi\build
Type cpack <enter>

cd C:\o-plugin\celestial_navigation_pi\build\_CPack_Packag es\win32\NSIS
Rename exe to
celestial_navigation_win32_pi1.8_v1.0_ov331731_pi. exe

Then try to install
celestial_navigation_win32_pi1.8_v1.0_ov331731_pi. exe to Opencpn3.3.1731.
1. The
celestial_navigation_pi/data file is installed properly.
2. celestial_navigation_pi.dll is installed.

This strategy did not work.
It would be nice if the "cpack" command had an argument like "--formatname" which would take the Version number and Plugin API and name the plugin dll and exe accordingly. I leave this for the programmers to figure out.

For the time being I may rename the exe if I have time.


__________________
rgleason is offline   Reply With Quote
Old 12-06-2014, 00:26   #83
Registered User
 
Gilletarom's Avatar

Join Date: Mar 2010
Location: France
Boat: 10.50 mètres
Posts: 2,100
Re: Sean Depagnier's Plugins

Hello RGleason,

Quote:
Originally Posted by rgleason View Post
4° There are many new items in english. Big work to translate from English to French. Please, update the pot file. - ok how is that done? Maybe you can describe this process or direct me to the manual where it shows the process....
Updated pot file is made by the developer. We will wait for Sean to do.

B.R. Gilletarom
__________________
Gilletarom is offline   Reply With Quote
Old 12-06-2014, 02:22   #84
Registered User
 
boat_alexandra's Avatar

Join Date: Aug 2009
Location: grenada
Boat: bristol 27
Posts: 2,514
Re: Sean Depagnier's Plugins

Quote:
Originally Posted by Gilletarom View Post
On WMM_pi.

1 I would have preferred that the "regulatory" name of the plugin to be used: Nom_winxx_piyy_vzz_pi

2 Installing without problem in the folder O 322.

3 By cons, for installation in the folder 331731 0, there is a problem with the installer. See the screenshot attached below. By choosing the folder 33731 O, it does not remove the file O 322.

4 I tested wmm and I did not find any problem. That said, if there is an abnormality in the calculation of curves, I have no way of checking.

5 ° I always hoped that the data provided by WMM will one day be used directly and automatically in O. To do this would require that the data provided by WMM, can be used automatically, in the last line options first tab of O options.

6° Thank you for having joined the French language automatically.

Best regards, Gilletarom.
The data by WMM _is_ used directly and automatically by O for route measurements and bearings and things.

Quote:
Originally Posted by Gilletarom View Post
Hello Sean,

Here other french language files. They are old from 2014-03-08 to 2014-03-13.

B.R. Gilletarom.
Thanks for all the french language files.

I have now for:
climatology, rtlsdr, trimplot, watchdog, statusbar, weatherfax, and weather routing.

I will integrate these shortly and push probably tomorrow. I think this covers all of the plugins because I already have a french translation for celestial navigation, although it is slightly out of date.
__________________
boat_alexandra is offline   Reply With Quote
Old 12-06-2014, 04:28   #85
Registered User
 
Gilletarom's Avatar

Join Date: Mar 2010
Location: France
Boat: 10.50 mètres
Posts: 2,100
Re: Sean Depagnier's Plugins

Hello Sean,

I will have limited time available this week and next week, new vesrions translate language files properly for. Then it's time to go to sea

That said, I will do my best.

Gilletarom.
__________________
Gilletarom is offline   Reply With Quote
Old 12-06-2014, 21:39   #86
Registered User
 
rgleason's Avatar

Join Date: Mar 2012
Location: Boston, MA
Boat: 1981 Bristol 32 Sloop
Posts: 7,646
Re: Sean Depagnier's Plugins

All Installation EXE files have been updated and will be found in the 3.3.1731 folder on Opencpn Beta File Thingie rguser rgpass. Note that climatology is now 5.3 mb and contains the necessary data files. These are the most recent git pull late today. Please test these plugins.

celestial_navigation_win32_pi-1.8_v0.9_ov331731_pi.exe
climatology_win32_pi-0.9_v0.8_ov331731_pi.exe
rtlsdr_win32_pi-0.10_v0.10_ov33173_pi.exe
statusbar_win32_pi-0.4_v0.4_ov331731_pi.exe
watchdog_win32_pi-1.0_v1.0_ov331731_pi.exe
weather_routing_win32_pi-0.11_v0.11_ov331731_pi.exe
weatherfax_win32_pi-0.10_v0.10_ov331731_pi.exe
wmm_win32_pi-0.7_v0.7_ov331731_pi.exe
__________________
rgleason is offline   Reply With Quote
Old 12-06-2014, 21:40   #87
Registered User
 
boat_alexandra's Avatar

Join Date: Aug 2009
Location: grenada
Boat: bristol 27
Posts: 2,514
Re: Sean Depagnier's Plugins

French translations for all plugins, good work gilletarom
Other languages mostly missing/incomplete

I tried to make some corrections to the french translations,
many had other plugin translations as well which I removed

here is my summary:

./watchdog_pi/po/fr.po -- complete
./climatology_pi/po/fr.po -- complete (except word for lightning)
./weatherfax_pi/po/fr.po -- complete
./weatherfax_pi/po/de.po -- partial
./statusbar_pi/po/fr.po -- partial
./rtlsdr_pi/po/fr.po -- complete
./trimplot_pi/po/fr.po -- complete
./celestial_navigation_pi/po/nl.po -- complete
./celestial_navigation_pi/po/fr.po -- partial
./celestial_navigation_pi/po/de.po -- partial
./weather_routing_pi/po/fr.po -- nearly complete (recent developments added a few strings)
./weather_routing_pi/po/de.po -- partial

It is also possible to translate the informational html file
for climatology, weather routing and celestial navigation, and provide the
translated filename in the translation po file, but this is a lot of extra work.
Even a shorter version which links to the original, one might find useful.
__________________
boat_alexandra is offline   Reply With Quote
Old 13-06-2014, 01:18   #88
Registered User
 
Gilletarom's Avatar

Join Date: Mar 2010
Location: France
Boat: 10.50 mètres
Posts: 2,100
Re: Sean Depagnier's Plugins

Hello Sean,


Quote:
Originally Posted by boat_alexandra View Post
......

It is also possible to translate the informational html file
for climatology, weather routing and celestial navigation, and provide the
translated filename in the translation po file, but this is a lot of extra work.
Even a shorter version which links to the original, one might find useful.
Give me some time. Before this work can ensure that these pages will not be changed?

2° Trying climatology this morning :
When the "Configuration" window is openned, if we click on the icon of climatology in the icon bar, then Climatology is shutdown (normal) but the window "Configuration" does not shutdown.

B.R. Gilletarom.
__________________
Gilletarom is offline   Reply With Quote
Old 13-06-2014, 01:51   #89
Registered User
 
Gilletarom's Avatar

Join Date: Mar 2010
Location: France
Boat: 10.50 mètres
Posts: 2,100
Re: Sean Depagnier's Plugins

Hello Sean,

Quote:
Originally Posted by boat_alexandra View Post
...
./climatology_pi/po/fr.po -- complete (except word for lightning)
....
I have a doubt about how to translate "Ligthning". It could be it storms or lightning itself.


I have a doubt about how to translate "Ligthning". It could be it storms or lightning itself.

Can you explain a little? Thank you in advance.
__________________
Gilletarom is offline   Reply With Quote
Old 13-06-2014, 02:35   #90
Registered User

Join Date: Dec 2011
Boat: MC-Tec, Akilaria 950
Posts: 176
Re: Sean Depagnier's Plugins

Quote:
Originally Posted by Gilletarom View Post
Hello Sean,



I have a doubt about how to translate "Ligthning". It could be it storms or lightning itself.

"Thunderstorms" should be the right expression.

Thomas
__________________

__________________
tom_BigSpeedy is offline   Reply With Quote
Reply

Tags
plug

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 16:58.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.