S63 Problem on 4.8.6 under openplotter

[Daveritten]

Hi
I have been trying too get some S63 charts from Chartworld. I ran through the process on my Mac running OpenCPN 5.X and it worked perfectly. I ran the same process on OpenCPN 4.8.6 on Openplotter 1.2 and all the fingerprint generation and certificate loading worked fine. I then load the charts and that seemed to work but the charts did not appear. I then checked and the S63 chart directory had not been added to the "Chart Files" tab. I added this in manually and rescanned the chart files but the charts still did not appear. Can anyone offer any ideas on what else I can try?
Thanks Dave

[bcn]

When loading the cell permits and then next the cells or charts, what does the log say?
The S-63 UserPermit for the RasPi is in place and checks ok?

[Daveritten]

Hi BCN
When I loaded the permits I pressed the test button and they were all ok. Please excuse my ignorance but which log should I have a look at?

[bcn]

You access the opencpn.log via the "help" or "about" button of the tool bar. The "?"
If you want to attach it here rename it to .doc in order to avoid size restrictions of the forum for attachments.

[Daveritten]

Hi bcn thanks for your advice. I attach the current log file to this message.
Rgds
Dave

[Daveritten]

My most abject apologies. I ran through the process from scratch and it is now working. I think I must have left out the step of importing the charts on the Raspi while I had done that on the Mac. I appreciate your help and my apologies once again. Rgds Dave