Hi,
Sorry for the delayed feedback.
This is my
hardware:
Intel® NUC Kit D34010WYK Product Specifications
I have 8GB of memory in it, and either 80GB SSD(Windows) or 30GB SSD(Ubuntu). Also has
wifi board installed.
I went out with the boat today to test course up with/without OpenGL enabled in OpenCPN.
A1) With OpenGL enabled. Course Up enabled. The boat is in the wrong position, and grey areas appear on the
screen from time to time. See attached image 1. Boat should be in the drawed circle.
A2) With OpenGL enabled. Course Up disabled. The boat is in the right position, and the
screen otherwise looks fine.. See attached image 2.
B) With open GL disabled. I went into trouble her. The OpenCPN application went into a "frozen" state and the computer became unresponsive. I was not able to test
navigation with OpenGL disabled. Had to kill the app several times to get the computer working again.. Se attaches image 3
Hope that helps. I have the same issue on Windows 10 - I am not able to test any other setups as i have used up mye 2 install permits for the Chartworld Charts.
Best regards
Baard -
norway.