OpenCPN Beta Version 4.8.10125

[bcn]

Dave...

do you remember that you compiled some special versions for this macMini with regards to Danish S-63/S-57 charts and we got it quite stable?

Obviously a very picky OpenGL driver on this system.

Did those patches make it into this beta?

Hubert

[sailorF54]

Originally Posted by boat_alexandra

That is strange. I built opencpn on aarch64 not long ago, but since then my odroid died.

Try commenting out the line in cmakelists.txt that sets mfpu=neon.

Also try executing:

gcc -dM -E - < /dev/null | grep NEON

and what is the output??

Let us know how the rock64 runs opencpn. Did it detect opengles?

Build went OK after commenting out the line containing mfpu=neon (thanks Pavel)
Yes, there IS a problem with opengl.
I have to read again the dev manual on building for armhf.
Unfortunately, I won't be at home until Monday, so tests will be postponed until then.
But I'll be back here !

[seandepagnier]

Originally Posted by bcn

German iENC:
https://www.elwis.de/DE/dynamisch/IENC/

There are many charts there. Which one(s) caused the problem?

[nohal]

Sean...
For example the picture with a waterway from S to N is from https://www.elwis.de/DE/dynamisch/IE...16-03-24_0_115

Pavel

[nohal]

And while I can't reproduce it with these very iENCs, I can do this with the ARG KAPs (chartdownloader plugin) and OpenGL and Smooth Panning & Zooming enabled:

[LeaseOnLife]

Originally Posted by rooiedirk

For one moment I thought there was a speed problem, but it turned out that all layers in the layers folder where turned on after updating. In mycase some 15000 objects.

Is there a reason for not taking the layer settings from the previous config file?

I can confirm this. But I do have a hunch, this happened before to me during an update. All my gpx layers were visible after the upgrade, while I have most of them on 'hide' usually.

Dirk II

[seandepagnier]

Originally Posted by nohal

And while I can't reproduce it with these very iENCs, I can do this with the ARG KAPs (chartdownloader plugin) and OpenGL and Smooth Panning & Zooming enabled:

the argentina kaps may or may not be the same issue.

If you inspect the kap files with a text editor, you will find reference points outside of the image (negative pixel coordinates)

the defined chart boundary is outside of the chart image. Normally the boundary (used for quilting) is inside the chart image or at least falls on the edge of the chart image. I have no idea if it's legal or not, it seems wrong to me.

We could perform a simple region operation to ensue the chart boundary only covers areas within the chart image.

I certainly didn't consider this case.

[bdbcat]

Nohal...

I concur with Sean. The Argentina charts are bizarre. Not the same issue as iENC bug bcn reports.

Dave

[bdbcat]

bcn...

re MacMini iENC rendering issue.

Still wondering:
1. Logfile, please.
2. Same behavior on O4.8.0?

Thanks
Dave

[CarCode]

Originally Posted by nohal

Gerhard...
This is an intentional change on macOS and will stay like this until we start using wxWidgets 3.2. You may want to see #2388 (hiding a wxSlider with labels only hides the slider only) – wxWidgets for explanation of the problem with slider labels, if you forgot why since last time.

Pavel

Is this also an intentional change when closing this slider then OpenCPN freezes and cannot be closed anymore?

You should be more honest to the users of the official OpenCPN version.

Gerhard

[nohal]

Originally Posted by CarCode

Is this also an intentional change when closing this slider then OpenCPN freezes and cannot be closed anymore?

Obviously a different issue, thank you for finding and reporting it.

You should be more honest to the users of the official OpenCPN version.

What does this have to do with honesty? What do you mean by lack of it? And how should we improve the situation exactly?

[bcn]

On my Mac the sliders are working without problems. HighSierra 10.13.2

Would it be possible to have the factors/numbers as tool tips while moving the slider - as a way around the not working fixed labels?

[bcn]

Originally Posted by bdbcat

bcn...

re MacMini iENC rendering issue.

Still wondering:
1. Logfile, please.
2. Same behavior on O4.8.0?

Thanks
Dave

After installing the oeSENC and S-63 plug-ins plus rebuilding the chart data base I can't replicate the error any longer.

Sorry

Hubert

[bcn]

Seeing a crash here zooming in:

Process:               OpenCPN [85260]
Path:                  /Applications/OpenCPN.app/Contents/MacOS/OpenCPN
Identifier:            org.opencpn
Version:               4.8.10125 (???)
Code Type:             X86-64 (Native)
Parent Process:        ??? [1]
Responsible:           OpenCPN [85260]
User ID:               501

Date/Time:             2018-01-26 11:49:55.588 +0100
OS Version:            Mac OS X 10.13.2 (17C205)
Report Version:        12
Anonymous UUID:        3B4E7B11-B4AD-07F5-C446-A58AF64462AC


Time Awake Since Boot: 730000 seconds

System Integrity Protection: enabled

Crashed Thread:        0  Dispatch queue: com.apple.main-thread

Exception Type:        EXC_BAD_ACCESS (SIGSEGV)
Exception Codes:       EXC_I386_GPFLT
Exception Note:        EXC_CORPSE_NOTIFY

Termination Signal:    Segmentation fault: 11
Termination Reason:    Namespace SIGNAL, Code 0xb
Terminating Process:   exc handler [0]

Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   org.opencpn                   	0x000000010f670d86 s52plib::RenderToGLAC(_ObjRazRules*, _Rules*, ViewPort*) + 806
1   org.opencpn                   	0x000000010f673c1d s52plib::RenderAreaToGL(wxGLContext const&, _ObjRazRules*, ViewPort*) + 285
2   org.opencpn                   	0x000000010f4752b3 PI_PLIBRenderAreaToGL(wxGLContext const&, PI_S57Obj*, PlugIn_ViewPort*, wxRect&) + 547
3   libs63_pi.dylib               	0x000000011efcf3e4 ChartS63::DoRenderRectOnGL(wxGLContext const&, PlugIn_ViewPort const&, wxRect&, bool) + 196
4   libs63_pi.dylib               	0x000000011efcf13d ChartS63::RenderRegionViewOnGL(wxGLContext const&, PlugIn_ViewPort const&, wxRegion const&, bool) + 893
5   org.opencpn                   	0x000000010f472a5d ChartPlugInWrapper::RenderRegionViewOnGLNoText(wxGLContext const&, ViewPort const&, OCPNRegion const&, LLRegion const&) + 1037
6   org.opencpn                   	0x000000010f544402 glChartCanvas::RenderQuiltViewGL(ViewPort&, OCPNRegion const&) + 802
7   org.opencpn                   	0x000000010f545be5 glChartCanvas::RenderCharts(ocpnDC&, OCPNRegion const&) + 1909
8   org.opencpn                   	0x000000010f53c8f8 glChartCanvas::Render() + 2616
9   org.opencpn                   	0x000000010f53497b glChartCanvas::OnPaint(wxPaintEvent&) + 155
10  libwx_baseu-3.0.0.3.0.dylib   	0x00000001105fa11f wxEventHashTable::HandleEvent(wxEvent&, wxEvtHandler*) + 351
11  libwx_baseu-3.0.0.3.0.dylib   	0x00000001105fad4d wxEvtHandler::ProcessEventLocally(wxEvent&) + 93
12  libwx_baseu-3.0.0.3.0.dylib   	0x00000001105fac30 wxEvtHandler::ProcessEvent(wxEvent&) + 96
13  libwx_baseu-3.0.0.3.0.dylib   	0x00000001105faffc wxEvtHandler::SafelyProcessEvent(wxEvent&) + 12
14  libwx_osx_cocoau_core-3.0.0.3.0.dylib	0x000000010ffe66f6 wxWindow::MacDoRedraw(long) + 774
15  libwx_osx_cocoau_core-3.0.0.3.0.dylib	0x000000011009a63b wxWidgetCocoaImpl::drawRect(void*, NSView*, void*) + 795
16  libwx_osx_cocoau_core-3.0.0.3.0.dylib	0x0000000110099016 wxOSX_drawRect(NSView*, objc_selector*, CGRect) + 86
17  com.apple.AppKit              	0x00007fff3935cc21 _NSViewDrawRect + 83
18  com.apple.AppKit              	0x00007fff38bf5b38 -[NSView _drawRect:clip:] + 1819
19  com.apple.AppKit              	0x00007fff38c3df62 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 1735
20  com.apple.AppKit              	0x00007fff38c3e42f -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2964
21  com.apple.AppKit              	0x00007fff38bf3a52 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topView:] + 938
22  com.apple.AppKit              	0x00007fff38bf42c1 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topView:] + 3097
23  com.apple.AppKit              	0x00007fff38bf42c1 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topView:] + 3097
24  com.apple.AppKit              	0x00007fff38bf31db -[NSThemeFrame _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topView:] + 327
25  com.apple.AppKit              	0x00007fff3935e1d8 -[NSView _oldDisplayRectIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:] + 2051
26  com.apple.AppKit              	0x00007fff38bf2261 -[NSView _displayRectIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:] + 253
27  com.apple.AppKit              	0x00007fff38bee4b8 -[NSView displayIfNeeded] + 1581
28  com.apple.AppKit              	0x00007fff38bede56 -[NSWindow displayIfNeeded] + 321
29  com.apple.AppKit              	0x00007fff3938e2d9 ___NSWindowGetDisplayCycleObserver_block_invoke.5902 + 308
30  com.apple.AppKit              	0x00007fff38bed962 __37+[NSDisplayCycle currentDisplayCycle]_block_invoke + 695
31  com.apple.QuartzCore          	0x00007fff466308af CA::Transaction::run_commit_handlers(CATransactionPhase) + 49
32  com.apple.QuartzCore          	0x00007fff4662f411 CA::Transaction::commit() + 171
33  com.apple.AppKit              	0x00007fff393a5658 __65+[CATransaction(NSCATransaction) NS_setFlushesWithDisplayRefresh]_block_invoke + 283
34  com.apple.CoreFoundation      	0x00007fff3b4f4117 __CFRUNLOOP_IS_CALLING_OUT_TO_AN_OBSERVER_CALLBACK_FUNCTION__ + 23
35  com.apple.CoreFoundation      	0x00007fff3b4f403f __CFRunLoopDoObservers + 511
36  com.apple.CoreFoundation      	0x00007fff3b4d6b48 __CFRunLoopRun + 1240
37  com.apple.CoreFoundation      	0x00007fff3b4d63d7 CFRunLoopRunSpecific + 487
38  com.apple.HIToolbox           	0x00007fff3a7e3e26 RunCurrentEventLoopInMode + 286
39  com.apple.HIToolbox           	0x00007fff3a7e3a9f ReceiveNextEventCommon + 366
40  com.apple.HIToolbox           	0x00007fff3a7e3914 _BlockUntilNextEventMatchingListInModeWithFilter + 64
41  com.apple.AppKit              	0x00007fff38aaef5f _DPSNextEvent + 2085
42  com.apple.AppKit              	0x00007fff39244b4c -[NSApplication(NSEvent) _nextEventMatchingEventMask:untilDate:inMode:dequeue:] + 3044
43  com.apple.AppKit              	0x00007fff38aa3d6d -[NSApplication run] + 764
44  libwx_osx_cocoau_core-3.0.0.3.0.dylib	0x000000011007e59e wxGUIEventLoop::OSXDoRun() + 174
45  libwx_baseu-3.0.0.3.0.dylib   	0x00000001105d9d91 wxCFEventLoop::DoRun() + 49
46  libwx_baseu-3.0.0.3.0.dylib   	0x000000011052ea75 wxEventLoopBase::Run() + 85
47  libwx_baseu-3.0.0.3.0.dylib   	0x00000001105003a4 wxAppConsoleBase::MainLoop() + 116
48  libwx_osx_cocoau_core-3.0.0.3.0.dylib	0x000000011001e50a wxApp::OnRun() + 26
49  libwx_baseu-3.0.0.3.0.dylib   	0x00000001105688ca wxEntry(int&, wchar_t**) + 58
50  org.opencpn                   	0x000000010f15fa34 main + 20
51  org.opencpn                   	0x000000010f15e3e4 start + 52

and this says the log:

11:49:52 CET: "/Applications/OpenCPN.app/Contents/PlugIns/s63_pi/OCPNsenc"  -n  -i "/Users/renate/Library/Preferences/opencpn/s63/s63SENC/9C2LILBL.es57" -o "/var/folders/t6/nmdh7bxs3qn5wtnrn94mqspw0000gn/T/DYUnYd" -u 50A9CE10D6081BCB35A528CD3147 -e 62EEA835 -p 9C2LILBL201801319A133FB9A7FCE5049A133FB9A7FCE5049856B6D1CE3C1C80,0,,49, -z "/Applications/OpenCPN.app/Contents/PlugIns/s63_pi/libs63_pi.dylib"
11:49:53 CET: Searching chart cache for oldest entry
11:49:53 CET: Initializing Chart /Users/renate/Library/Preferences/opencpn/s63/s63charts/49/9C2STOBL.os63
11:49:53 CET: "/Applications/OpenCPN.app/Contents/PlugIns/s63_pi/OCPNsenc"  -n  -i "/Users/renate/Library/Preferences/opencpn/s63/s63SENC/9C2STOBL.es57" -o "/var/folders/t6/nmdh7bxs3qn5wtnrn94mqspw0000gn/T/3aWcpX" -u 50A9CE10D6081BCB35A528CD3147 -e 62EEA835 -p 9C2STOBL20180131F009A8A79BCD229DF009A8A79BCD229D7C1BE040407252E2,0,,49, -z "/Applications/OpenCPN.app/Contents/PlugIns/s63_pi/libs63_pi.dylib"
11:49:54 CET: Searching chart cache for oldest entry
11:49:54 CET: Initializing Chart /Users/renate/oeSENC/macmini-BE_DE_NL-2017-2/OC-31-P73012.oesenc
11:49:54 CET: processChartInfo /Users/renate/oeSENC/macmini-BE_DE_NL-2017-2/OC-31-P73012.oesenc
11:49:54 CET: validate_SENC_server
11:49:54 CET: Available TRUE

The fault is repeatable.
The oeSENC plug-in is the standard one from the download page.

Hubert

[nohal]

Originally Posted by bcn

On my Mac the sliders are working without problems. HighSierra 10.13.2

The problem with the modal detail slider dialog Gerhard reports does exist, fix coming shortly.

Would it be possible to have the factors/numbers as tool tips while moving the slider - as a way around the not working fixed labels?

There is a price in work doing anything but simply not using the, in wx3.0 on macOS, buggy sliders with labels anywhere where they can be hidden or are placed on a scrollable window. My question is: Is this an issue important enough to invest that work? I'm so far not sure, convince me...

Pavel