OpenCPN Beta Version 3.1.919 Released

[Gilletarom]

hello,

Little bug.

In the new "Toolbox", tab "Chart", Tab "Vectors charts", the CM93 cursor is black at first display and normal if we click on the cursor.

see screen copy.

[Gilletarom]

Hello,

Sorry but there is an other bug ...

Open Toolbox/Chart/Vertors chart.

Desable all objects and choice somme objects only. (By example, here I have choiced all the beacon objects)

Click "Ok"

The objet which are displayed are not the objects that we have choiced ...

Open Toolbox/Chart/Vertors chart.

Click directly on "Ok"

The objects which are displayed are not the objects that I have choiced at first time and they are not the objects which are displayed at first time

And so on !!!

See screen copy

Gilletarom.

[JesperWe]

Originally Posted by Gilletarom

Open Toolbox/Chart/Vertors chart.
The objet which are displayed are not the objects that we have choiced ...

Now this thread is getting too long again

Thanks for your detailed report! The problem is discussed in detail on pages 1 & 3 of this thread, and has been fixed.

[Gilletarom]

Hello,

Originally Posted by JesperWe

Now this thread is getting too long again

Thanks for your detailed report! ....

Sorry ! I am like a lazy jack ... I do not read all the thread.

Gilletarom.

[Gilletarom]

Hello JesperWe, hello Dave,

Laziness to read the entire thread for versions 3.1.915 and 3.1.919. Perhaps the question has already been asked-such.

In the old "Toolbox", there was a item on the permanent layers. He disappeared from the new "toolbox".

What about?

Gilletarom.

[cagney]

A bit late, but anyway...

All Mac users. Beta 3.1.919,dmg is now available for testing.

@Gilletarom
The item "Show layers initially" is gone from the new menu. Just a bit of cleaning up. It should not really have been in the 3.XX menu either, as it did nothing. The option had no effect, as all about layers visibility etc, has been handled through the Route Managers Layers tab for a long time.

Thomas

[Gilletarom]

hello Thomas,

I thing that we do not speak of the same subject. The permanent layers or initial layers are not present in the route manager layers.

These kind of layers are different than the "normal layers". it was necessary to place these layers in a special folder and then when the item was checked, these kind of layers was displayed.

I see nothing, now, in the Layer manager of the 3.1.919 about the initial layers.

B.R.

Gilletarom.

[arnand01]

Hi,
When moving chart center somewhere north of 70'00N, in my case some secret fishing spots close to Tromsö/Norway, CM93 charts disappears .

I have tried most of the chart display settings both on Win7 and XUbuntu but no difference. All back to normal when I reinstalled 3.02. Please see attachment för details.

/Anders

[sbfreddie]

Originally Posted by cagney

A bit late, but anyway...

All Mac users. Beta 3.1.919,dmg is now available for testing.

@Gilletarom
The item "Show layers initially" is gone from the new menu. Just a bit of cleaning up. It should not really have been in the 3.XX menu either, as it did nothing. The option had no effect, as all about layers visibility etc, has been handled through the Route Managers Layers tab for a long time.

Thomas

Thomas:
I downloaded the latest O Beta 3.1.919 build from the Website you mentioned, and it freezes (Spinning Beachball) as soon as it you click on the OK button to load charts. Here is the log file:

10:38:03 PDT: 2012-10-02
10:38:03 PDT:  ------- Starting OpenCPN -------
10:38:03 PDT: Version 3.1.919 Build 2012-09-19
10:38:03 PDT: wxWidgets version: wxWidgets 2.8.12
10:38:03 PDT: MemoryStatus:  mem_total: 0 mb,  mem_initial: 0 mb
10:38:03 PDT: SData_Locn is /Users/freddie/Desktop/OpenCPN.app/Contents/SharedSupport/
10:38:03 PDT: Creating new Config_File: /Users/freddie/Library/Preferences/opencpn.ini
10:38:03 PDT: Styles loading from /Users/freddie/Desktop/OpenCPN.app/Contents/SharedSupport/uidata/styles.xml
10:38:03 PDT: No styles found at: /Users/freddie/Library/Preferences/opencpn/
10:38:03 PDT: No styles found at: /Users/freddie/Library/Preferences/opencpn/.opencpn/
10:38:03 PDT: Setting Viewpoint Lat/Lon 33.358, -79.282
10:38:03 PDT: Setting Ownship Lat/Lon 33.358, -79.282
10:38:03 PDT: System default Language:  en_US
10:38:03 PDT: Opencpn language set to:  en_US
10:38:08 PDT: ChartSymbols loaded from /Users/freddie/Desktop/OpenCPN.app/Contents/SharedSupport/s57data/chartsymbols.xml
10:38:08 PDT: Using s57data in /Users/freddie/Desktop/OpenCPN.app/Contents/SharedSupport/s57data
10:38:08 PDT: Setting Viewpoint Lat/Lon 33.358, -79.282
10:38:08 PDT: Setting Ownship Lat/Lon 33.358, -79.282
10:38:08 PDT: NMEA Data Source is....NONE
10:38:08 PDT: AIS Data Source is....NONE
10:38:08 PDT: NMEA AutoPilot Port is....NONE
10:38:09 PDT: PlugInManager searching for PlugIns in location /Users/freddie/Desktop/OpenCPN.app/Contents/PlugIns
10:38:09 PDT: PlugInManager: Loading PlugIn: /Users/freddie/Desktop/OpenCPN.app/Contents/PlugIns/libdashboard_pi.dylib
10:38:09 PDT:   /Users/freddie/Desktop/OpenCPN.app/Contents/PlugIns/libdashboard_pi.dylib Version detected: 106
10:38:09 PDT: PlugInManager: Loading PlugIn: /Users/freddie/Desktop/OpenCPN.app/Contents/PlugIns/libgrib_pi.dylib
10:38:09 PDT:   /Users/freddie/Desktop/OpenCPN.app/Contents/PlugIns/libgrib_pi.dylib Version detected: 107
10:38:09 PDT: ChartDB Cache policy:  Max open chart limit is 20.
10:38:09 PDT: Chartlist file not found, config chart dir array is empty.  Chartlist target file is:/Users/freddie/Library/Application Support/OpenCPN/chartlist.dat

System is: Mac OS X 10.7.5

thanks,
Freddie

[cagney]

Originally Posted by Gilletarom

hello Thomas,

I thing that we do not speak of the same subject. The permanent layers or initial layers are not present in the route manager layers.

These kind of layers are different than the "normal layers". it was necessary to place these layers in a special folder and then when the item was checked, these kind of layers was displayed.

I see nothing, now, in the Layer manager of the 3.1.919 about the initial layers.

B.R.

Gilletarom.

Nothing in the route manager, and the handling of layers has changed, as far as I know, in 3.1.919. The layers are working the way they used to, and the way it's described in the documentation.

Check the location of your "layers" directory if you have problems!

Thomas

[JesperWe]

Originally Posted by arnand01

Hi,
When moving chart center somewhere north of 70'00N, in my case some secret fishing spots close to Tromsö/Norway, CM93 charts disappears

For the record, this issue is fixed by Dave for next beta and in current master. A chart database rebuild will be needed to activate the fix.

[JesperWe]

Originally Posted by sinbad7

Just downloaded 3.1.919 which seems to work ok for most of the functions I have tested,BUT,I have lost MY ship? No indication at all allthough the ownship.xpm icon is in the Usericons directory.

When I connect my GPS,it locates ownship at lat 0 lon 0
Zooming in,I find my ownship icon.

There is an intermittent bug in this beta that can cause the ownship icon to disappear randomly. It is fixed for the next release.

[markdj]

Bug report.

Use the keyboard to zoom in and out using the + and - keys causes the auto follow mode to disengage.

Thanks


Mark

[AISEAG]

Originally Posted by markdj

Bug report.

Use the keyboard to zoom in and out using the + and - keys causes the auto follow mode to disengage.

Thanks

Mark

Hi Mark,

Is there any specific reason for you to use this beta version ?.

If No, may I suggest you to switch to the actual stable version (3.2.2 - available since may 2013) and the latest beta version (3.3.1931 - available since end of July), you will be surprised by the new set of functionalities.

[markdj]

Sorry I should have posted this to that thread, I'm using the latest beta, this is a bug with the latest beta.