Cruisers Forum
 


Join CruisersForum Today

Reply
 
Thread Tools Rate Thread Display Modes
Old 23-06-2015, 07:31   #106
Registered User

Join Date: Jun 2010
Location: St. Petersburg, Florida
Boat: Gemini 3200
Posts: 702
Re: OpenCPN Beta test 4.1.602 Release

Quote:
Originally Posted by fgd3 View Post
Under Ubuntu Linux 14.04 I have a new problem with 4.1.602. It's quite slow displaying ENCs and the sea bottom is gray. I don't see the blue and white areas based on depth that I'm used to seeing (see the attached screen shot). Performance displaying ENCs is poor, too. Since I hadn't run a software update in over a month it's impossible to say what else might have changed to contribute to this result. Is anyone else having trouble with ENC displays?

Fabbian
I'm still having the same problem with 4.1.602 not displaying ENC sea details. Here's the log file from the last session:


________
09:14:55 EDT: 2015-06-23
09:14:55 EDT: ------- Starting OpenCPN -------
09:14:55 EDT: Version 4.1.602 Build 2015-06-02
09:14:56 EDT: wxWidgets version: wxWidgets 3.0.0 Linux 64 bit wxGTK
09:14:56 EDT: MemoryStatus: mem_total: 737 mb, mem_initial: 15 mb
09:14:56 EDT: SData_Locn is /usr/share/opencpn/
09:14:56 EDT: PrivateDataDir is /home/fabbian/.opencpn
09:14:56 EDT: Using existing Config_File: /home/fabbian/.opencpn/opencpn.conf
09:14:56 EDT: Styles loading from /usr/share/opencpn/uidata/styles.xml
09:14:56 EDT: No styles found at: /home/fabbian/
09:14:56 EDT: No styles found at: /home/fabbian/.opencpn/
09:14:56 EDT: Detected display size (horizontal): 361 mm
09:14:56 EDT: Setting Viewpoint Lat/Lon 27.7394, -82.6349
09:14:56 EDT: Setting Ownship Lat/Lon 27.7417, -82.6377
09:14:56 EDT: System default Language: en_US
09:14:56 EDT: Opencpn language set to: en_US
09:14:56 EDT: Creating glChartCanvas
09:14:56 EDT: ChartDB Cache policy: Application target is 360 MBytes
09:14:56 EDT: Loading chart db version: V018
09:14:56 EDT: Chartdb: Chart directory list follows
09:14:56 EDT: Chart directory #0: /home/fabbian/Navigation/Charts
09:14:56 EDT: GPS Watchdog Timeout is: 6 sec.
09:14:56 EDT: ChartSymbols loaded from /usr/share/opencpn/s57data/chartsymbols.xml
09:14:56 EDT: Using s57data in /usr/share/opencpn/s57data
09:14:56 EDT: Initializing Chart /home/fabbian/Navigation/Charts/NOAA ENCs/ENC_ROOT/US5FL11M/US5FL11M.000
09:14:57 EDT: Warning: Color not found CHDRD
09:14:57 EDT: OpenCPN Initialized in 2439 ms.
09:14:58 EDT: Loading navobjects from navobj.xml
09:14:58 EDT: Done loading navobjects
09:14:58 EDT: Opening NMEA Datastream Serial:/dev/ttyUSB0
09:14:58 EDT: NMEA input device open failed: /dev/ttyUSB0
09:14:58 EDT: PlugInManager searching for PlugIns in location /usr/lib/opencpn
09:14:59 EDT: ***GPS Watchdog timeout at Lat:27.7417 Lon: -82.6377
09:15:02 EDT: Chart cache purge
09:15:02 EDT: Initializing Chart /home/fabbian/Navigation/Charts/NOAA RNCs/BSB_ROOT/11416/11416_1.KAP
09:15:06 EDT: opencpn::MyFrame exiting cleanly.
09:15:06 EDT: Closing NMEA Datastream Serial:/dev/ttyUSB0
09:15:06 EDT: Chart cache purge
09:15:06 EDT: opencpn::MyApp starting exit.
09:15:06 EDT: LOGBOOK: 2015-06-23 13:15:06 UTC OFF: Lat 27.74170 Lon -82.63770
09:15:06 EDT: opencpn::MyApp exiting cleanly...

Nothing jumps out at me. My next step would be to uninstall 4.1.602 and reinstall it. How do I do that in Ubuntu Linux? When I run the Software Updater it tells me everything is up to date.

Fabbian
__________________

__________________
fgd3 is offline   Reply With Quote
Old 23-06-2015, 19:13   #107
Registered User
 
Wrong's Avatar

Join Date: Jul 2013
Posts: 1,702
Re: OpenCPN Beta test 4.1.602 Release

Quote:
Originally Posted by fgd3 View Post
I'm still having the same problem with 4.1.602 not displaying ENC sea details. Here's the log file from the last session:


________
09:14:55 EDT: 2015-06-23
09:14:55 EDT: ------- Starting OpenCPN -------
09:14:55 EDT: Version 4.1.602 Build 2015-06-02
09:14:56 EDT: wxWidgets version: wxWidgets 3.0.0 Linux 64 bit wxGTK
09:14:56 EDT: MemoryStatus: mem_total: 737 mb, mem_initial: 15 mb
09:14:56 EDT: SData_Locn is /usr/share/opencpn/
09:14:56 EDT: PrivateDataDir is /home/fabbian/.opencpn
09:14:56 EDT: Using existing Config_File: /home/fabbian/.opencpn/opencpn.conf
09:14:56 EDT: Styles loading from /usr/share/opencpn/uidata/styles.xml
09:14:56 EDT: No styles found at: /home/fabbian/
09:14:56 EDT: No styles found at: /home/fabbian/.opencpn/
09:14:56 EDT: Detected display size (horizontal): 361 mm
09:14:56 EDT: Setting Viewpoint Lat/Lon 27.7394, -82.6349
09:14:56 EDT: Setting Ownship Lat/Lon 27.7417, -82.6377
09:14:56 EDT: System default Language: en_US
09:14:56 EDT: Opencpn language set to: en_US
09:14:56 EDT: Creating glChartCanvas
09:14:56 EDT: ChartDB Cache policy: Application target is 360 MBytes
09:14:56 EDT: Loading chart db version: V018
09:14:56 EDT: Chartdb: Chart directory list follows
09:14:56 EDT: Chart directory #0: /home/fabbian/Navigation/Charts
09:14:56 EDT: GPS Watchdog Timeout is: 6 sec.
09:14:56 EDT: ChartSymbols loaded from /usr/share/opencpn/s57data/chartsymbols.xml
09:14:56 EDT: Using s57data in /usr/share/opencpn/s57data
09:14:56 EDT: Initializing Chart /home/fabbian/Navigation/Charts/NOAA ENCs/ENC_ROOT/US5FL11M/US5FL11M.000
09:14:57 EDT: Warning: Color not found CHDRD
09:14:57 EDT: OpenCPN Initialized in 2439 ms.
09:14:58 EDT: Loading navobjects from navobj.xml
09:14:58 EDT: Done loading navobjects
09:14:58 EDT: Opening NMEA Datastream Serial:/dev/ttyUSB0
09:14:58 EDT: NMEA input device open failed: /dev/ttyUSB0
09:14:58 EDT: PlugInManager searching for PlugIns in location /usr/lib/opencpn
09:14:59 EDT: ***GPS Watchdog timeout at Lat:27.7417 Lon: -82.6377
09:15:02 EDT: Chart cache purge
09:15:02 EDT: Initializing Chart /home/fabbian/Navigation/Charts/NOAA RNCs/BSB_ROOT/11416/11416_1.KAP
09:15:06 EDT: opencpn::MyFrame exiting cleanly.
09:15:06 EDT: Closing NMEA Datastream Serial:/dev/ttyUSB0
09:15:06 EDT: Chart cache purge
09:15:06 EDT: opencpn::MyApp starting exit.
09:15:06 EDT: LOGBOOK: 2015-06-23 13:15:06 UTC OFF: Lat 27.74170 Lon -82.63770
09:15:06 EDT: opencpn::MyApp exiting cleanly...

Nothing jumps out at me. My next step would be to uninstall 4.1.602 and reinstall it. How do I do that in Ubuntu Linux? When I run the Software Updater it tells me everything is up to date.

Fabbian
If you installed OpenCPN using a .deb file: 'apt-get remove opencpn (or OpenCPN)' <enter>

If installed from source delete /usr/share/opencpn, /usr/bin/opencpn, /usr/lib/opencpn. 'cd' to the 'build' directory in the OpenCPN source. 'make clean'<enter> then compile and install as normal...
__________________

__________________
Wrong is offline   Reply With Quote
Old 23-06-2015, 21:11   #108
Marine Service Provider
 
bdbcat's Avatar

Join Date: Mar 2008
Posts: 4,883
Re: OpenCPN Beta test 4.1.602 Release

fgd3...

Re: missing sea details....
Are you running with OpenGL on? Please try both on and off, and report results.

Thanks
Dave
__________________
bdbcat is offline   Reply With Quote
Old 23-06-2015, 22:01   #109
Registered User

Join Date: Jun 2010
Location: St. Petersburg, Florida
Boat: Gemini 3200
Posts: 702
Re: OpenCPN Beta test 4.1.602 Release

Quote:
Originally Posted by bdbcat View Post
fgd3...

Re: missing sea details....
Are you running with OpenGL on? Please try both on and off, and report results.

Thanks
Dave
Tried it both ways. It made no difference.

Fabbian
__________________
fgd3 is offline   Reply With Quote
Old 23-06-2015, 23:18   #110
Registered User
 
NahanniV's Avatar

Join Date: Mar 2011
Location: On the Boat
Boat: Finnsailer 38
Posts: 1,143
Re: OpenCPN Beta test 4.1.602 Release

I have wxWidgets-3.0.2 installed on my ARM board now, but it made no difference.

The chart selector toolbar is still under OpenCPN.

Still crashing on startup if OpenGL is enabled:
Code:
aruntu@aruntu:~/OpenCPN/build$ opencpn

(opencpn:28901): Gdk-CRITICAL **: IA__gdk_colormap_new: assertion 'GDK_IS_VISUAL (visual)' failed

(opencpn:28901): Gtk-CRITICAL **: IA__gtk_widget_set_colormap: assertion 'GDK_IS_COLORMAP (colormap)' failed

(opencpn:28901): GLib-GObject-CRITICAL **: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
libGL: built on Jun 19 2015 05:42:49
Aborted (core dumped)
a
Log File:
Code:
00:33:32 EDT: 2015-06-24
00:33:32 EDT:  ------- Starting OpenCPN -------
00:33:32 EDT: Version 4.1.602 Build 2015-06-02
00:33:33 EDT: wxWidgets version: wxWidgets 3.0.2 Linux 32 bit wxGTK
00:33:33 EDT: MemoryStatus:  mem_total: 1838 mb,  mem_initial: 9 mb
00:33:34 EDT: SData_Locn is /usr/local/share/opencpn/
00:33:34 EDT: PrivateDataDir is /home/aruntu/.opencpn
00:33:34 EDT: Using existing Config_File: /home/aruntu/.opencpn/opencpn.conf
00:33:34 EDT: Styles loading from /usr/local/share/opencpn/uidata/styles.xml
00:33:34 EDT: No styles found at: /home/aruntu/
00:33:34 EDT: No styles found at: /home/aruntu/.opencpn/
00:33:34 EDT: Detected display size (horizontal): 508 mm
00:33:34 EDT: Setting Viewpoint Lat/Lon 43.3559, -79.5177
00:33:34 EDT: Setting Ownship Lat/Lon 33.358, -79.282
00:33:34 EDT: System default Language:  en_US
00:33:34 EDT: Opencpn language set to:  en_US
00:33:34 EDT: Creating glChartCanvas
00:43:07 EDT:
Also crashes when ingesting ENC's (-no_opengl):

Code:
*** opencpn (wxWidgets 3.0.2) crashed ***, see backtrace!
0x267764 in wxCrashPrint::Report() at crashprint.cpp:84
0xb6f10008 in  at ??:0
0xb6361af0 in  at ??:0
0x29ed48 in S57Obj::S57Obj(char*, wxInputStream*, double, double, int) at s57chart.cpp:589
0x2a4ba6 in s57chart::BuildRAZFromSENCFile(wxString const&) at s57chart.cpp:4582 (discriminator 2)
0x2a4f14 in s57chart::PostInit(ChartInitFlag, ColorScheme) at s57chart.cpp:3094
0x2a8588 in s57chart::Init(wxString const&, ChartInitFlag) at s57chart.cpp:2915
0xfcbae in ChartDB::OpenChartUsingCache(int, ChartInitFlag) at chartdb.cpp:1355
0xd6d7e in MyFrame::SelectQuiltRefdbChart(int, bool) at chart1.cpp:6761
0xdf98a in MyFrame::HandlePianoClick(int, int) at chart1.cpp:6610
0x1b1bde in PianoWin::MouseEvent(wxMouseEvent&) at statwin.cpp:655
0xb6e23146 in wxAppConsoleBase::CallEventHandler(wxEvtHandler*, wxEventFunctor&, wxEvent&) const at ??:0
0xb6f27386 in wxEvtHandler::ProcessEventIfMatchesId(wxEventTableEntryBase const&, wxEvtHandler*, wxEvent&) at ??:0
0xb6f2742c in wxEventHashTable::HandleEvent(wxEvent&, wxEvtHandler*) at ??:0
0xb6f276aa in wxEvtHandler::TryHereOnly(wxEvent&) at ??:0
0xb6f276f2 in wxEvtHandler::ProcessEventLocally(wxEvent&) at ??:0
0xb6f27738 in wxEvtHandler::ProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
0xb6f27574 in wxEvtHandler::SafelyProcessEvent(wxEvent&) at ??:0
Aborted (core dumped)
aruntu@aruntu:~/OpenCPN/build$
Log File:
Code:
00:46:43 EDT: Chart cache purge
00:46:43 EDT: Initializing Chart /media/aRUNTU_1.001/home/aruntu/Charts/20150203_U6Inland_Week6_NL/ENC_ROOT/1R/6/1R65W8LI/1R65W8LI.000
00:46:43 EDT: Building SENC file for /media/aRUNTU_1.001/home/aruntu/Charts/20150203_U6Inland_Week6_NL/ENC_ROOT/1R/6/1R65W8LI/1R65W8LI.000 to /home/aruntu/.opencpn/SENC/1R65W8LI.S57
00:47:09 EDT:    Warning 1: Polygon assembly has failed for feature FIDN=1418739494,FIDS=32839.
Geometry may be missing or incomplete.
00:47:09 EDT:    Warning: S57 SENC Geometry Error 2, Some Features ignored.
00:47:09 EDT:    Warning 1: Polygon assembly has failed for feature FIDN=1418739494,FIDS=32840.
Geometry may be missing or incomplete.
00:47:09 EDT:    Warning: S57 SENC Geometry Error 2, Some Features ignored.
__________________
NahanniV is online now   Reply With Quote
Old 24-06-2015, 02:43   #111
Registered User

Join Date: Jun 2015
Posts: 3
Re: OpenCPN Beta test 4.1.602 Release

Hi,

I've an issue when installing the 4.1.602 on OS X Yosemite: "Dmg image not recognized".
The 4.0 is working well.

Thanks,

Philippe
__________________
philippeh is offline   Reply With Quote
Old 24-06-2015, 02:57   #112
Registered User

Join Date: Jul 2010
Location: Monastir, Tunisia
Boat: Amel Sharki
Posts: 1,774
Re: OpenCPN Beta test 4.1.602 Release

Quote:
Originally Posted by philippeh View Post
Hi,

I've an issue when installing the 4.1.602 on OS X Yosemite: "Dmg image not recognized".
The 4.0 is working well.

Thanks,

Philippe
You have either moved the downloaded dmg file to your applications folder and tried to start it there or the downloaded dmg file is corrupted.
Download the file again, open it in Finder and copy the included OpenCPN.app file seen in the dmg window to applications folder.

Gerhard
__________________
CarCode is offline   Reply With Quote
Old 24-06-2015, 03:30   #113
Registered User

Join Date: Sep 2009
Location: Angers - France
Boat: Beneteau First 29 Ptizef
Posts: 743
Re: OpenCPN Beta test 4.1.602 Release

Hi all

Netbook windows 8.1

I had plenty of problems with 4.1.602 when creating-modifying or dragging routes and way points. After re-installing 4.0, it was the same !
So I removed all files & O application and done a new clear install.
The problems disappeared ( except one which is new in 602, see #1785).
I don't know how it has appended, but it is.

But I have another problem with AIS : Targets not shown. Sometime one or two targets appears, then almost immediately disappears whereas I am in a zone where there are numbers.
I re-install 4.0 and it works. then I re-install 602, it doesn't work. With the same devices, the same environment, the same parameters.
Am I the only one to face this problem ?

Jean Pierre
__________________
Ptizef is offline   Reply With Quote
Old 24-06-2015, 04:10   #114
Registered User

Join Date: Jul 2010
Location: Monastir, Tunisia
Boat: Amel Sharki
Posts: 1,774
Re: OpenCPN Beta test 4.1.602 Release

JP,
in both modes with and without OpenGL?

Gerhard
__________________
CarCode is offline   Reply With Quote
Old 24-06-2015, 04:38   #115
Registered User

Join Date: Jun 2015
Posts: 200
Re: OpenCPN Beta test 4.1.602 Release

Hi,
Can you double check that ocpn is not in mariner's standart display mode with 'Depth area' unset?
__________________
did-g is online now   Reply With Quote
Old 24-06-2015, 04:38   #116
Registered User

Join Date: Jun 2015
Posts: 3
Re: OpenCPN Beta test 4.1.602 Release

Quote:
Originally Posted by CarCode View Post
You have either moved the downloaded dmg file to your applications folder and tried to start it there or the downloaded dmg file is corrupted.
Download the file again, open it in Finder and copy the included OpenCPN.app file seen in the dmg window to applications folder.

Gerhard
Thanks.

After 3 times it's finally working

Another problem, the app is freezing just after launch, I've just accepted the disclamer and it freezed. Force close and relaunch are not helping. No more informations about the problem yet.
__________________
philippeh is offline   Reply With Quote
Old 24-06-2015, 05:20   #117
Registered User

Join Date: Jul 2010
Location: Monastir, Tunisia
Boat: Amel Sharki
Posts: 1,774
Re: OpenCPN Beta test 4.1.602 Release

Quote:
Originally Posted by philippeh View Post
Thanks.

After 3 times it's finally working

Another problem, the app is freezing just after launch, I've just accepted the disclamer and it freezed. Force close and relaunch are not helping. No more informations about the problem yet.
4.1.406 is still a beta version and should used only by experienced users to help to find bugs. Among other things the path to supplementary setting files has changed and that might cause your freeze. I don't kow however. Use the stable version 4.0.0 instead.

Gerhard
__________________
CarCode is offline   Reply With Quote
Old 26-06-2015, 22:10   #118
Registered User

Join Date: Jun 2010
Location: St. Petersburg, Florida
Boat: Gemini 3200
Posts: 702
Re: OpenCPN Beta test 4.1.602 Release

Quote:
Originally Posted by fgd3 View Post
I'm still having the same problem with 4.1.602 not displaying ENC sea details.
Mystery solved, sort of. I reinstalled OpenCPN with no improvement. Then I checked the "Select All" box under the list of Mariner's Standard object types. I don't know what data type got checked that wasn't checked before, but the gray background was replaced with the colors I'm used to seeing.

Fabbian
__________________
fgd3 is offline   Reply With Quote
Old 29-06-2015, 14:54   #119
Registered User

Join Date: Sep 2009
Location: Angers - France
Boat: Beneteau First 29 Ptizef
Posts: 743
Re: OpenCPN Beta test 4.1.602 Release

help
I have still the problem of AIS target not shown and blinking with 4.1.602 as described in #113 above on my net book W8.1
When I use the "official" beta release , which as been compiled with wx3.02 library and VS2013 I suppose, it doesn't work. If I use a home-made compilation with wx2.8 library and VS2010, it works perfectly. (I am not yet ready to migrate to VS2013)
I've installed VS2013 distributable X64/X86, but that change nothing
What could be missing on my machine?

Thanks
Jean Pierre
__________________
Ptizef is offline   Reply With Quote
Old 29-06-2015, 14:58   #120
Registered User

Join Date: Feb 2010
Location: On the go. Not in Prague.
Posts: 4,016
Re: OpenCPN Beta test 4.1.602 Release

JP...
By "doesn't work" you mean the program does not work at all or you refer to this particular AIS problem?

Pavel
__________________

__________________
nohal is offline   Reply With Quote
Reply

Tags
enc, lease, opencpn

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Beta Test / Technical bdbcat OpenCPN 2072 12-12-2017 18:48
OpenCPN for Android Beta test 4.1.530 bdbcat OpenCPN 203 07-05-2017 22:20
OpenCPN Version 2.2 Beta Test bdbcat OpenCPN 437 15-12-2010 20:17
OpenCPN Version 2.2 Beta Test Bugs / Discussion bdbcat OpenCPN 120 26-09-2010 03:53



Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 16:43.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.