Cruisers Forum
 


Join CruisersForum Today

Reply
 
Thread Tools Rate Thread Display Modes
Old 12-11-2015, 19:08   #61
Registered User

Join Date: Mar 2010
Location: Wandering around North America
Boat: Defever 43 - Gray Hawk
Posts: 597
Re: OpenCPN Beta test 4.1.1108 Release

Quote:
Originally Posted by Tupaia View Post
I suggest this is a driver issue relating to your graphics hardware. It might be that you hardware cannot support OpenGL full stop. It is also typical of what happens on Intel 945 and 965 series boards. See OpenGL discussion my Post :2 and Hoolie's post :18 above. There is some success in updating the driver for 965 but latest drivers for 945 boards do not solve the problem.
I freely admit that I am a relative luddite in this community however I have been unable to find any utility which would confirm your theory that OpenGL doesn't work on my machine and in fact Google Earth runs just fine using OpenGL. So I am sceptical that this is in fact the problem. Previous versions of O have run on this machine under OpenGL. If you have some suggestions as to how I could prove/disprove your theory I'm game to try.
__________________

__________________
R.J.(Bob) Evans
M/V Gray Hawk, 43 Defever Offshore Cruiser
http://www.bobandmarilyn.ca
bobofthenorth is offline   Reply With Quote
Old 12-11-2015, 23:04   #62
Registered User

Join Date: May 2014
Posts: 76
Re: OpenCPN Beta test 4.1.1108 Release

Quote:
Originally Posted by bobofthenorth View Post
I freely admit that I am a relative luddite in this community however I have been unable to find any utility which would confirm your theory that OpenGL doesn't work on my machine and in fact Google Earth runs just fine using OpenGL. So I am sceptical that this is in fact the problem. Previous versions of O have run on this machine under OpenGL. If you have some suggestions as to how I could prove/disprove your theory I'm game to try.
Many boards with integrated graphics will not run O with OGL(on) they just hang. Intel for example resisted support for OpenGL for a long time. Although they now support it some of the drivers for legacy graphics do not implement it "fully" or "correctly". GE may well run OK previous version of O 4.0.0 ran OK. They may well state 1.1, 1.2 or even 1.3 (latest ver is 3.0) I have a 945GSE that in theory is OGL 1.2 but in practice this is slower than without it.

1108 has caused a problem that on my machine it will now not display charts with OGL(on) that means the radar overlay cannot be used. The previous version 4.0.0 did not have this issue. So there is definitely a OpenCPN change that is resulting in or exposing some OGL bugs!

What is the make, model, OS, OGL Ver of your PC?
__________________

__________________
Tupaia is offline   Reply With Quote
Old 13-11-2015, 03:10   #63
Registered User
 
rgleason's Avatar

Join Date: Mar 2012
Location: Boston, MA
Boat: 1981 Bristol 32 Sloop
Posts: 7,623
Re: OpenCPN Beta test 4.1.1108 Release

Sometime ago Carcode suggested a program which checks your graphics card features. Do a search on the forum or look in opencpn.org documentation, perhaps supplimentary programs.
__________________
rgleason is online now   Reply With Quote
Old 13-11-2015, 03:20   #64
Registered User

Join Date: Jul 2010
Location: Monastir, Tunisia
Boat: Westerly Pentland
Posts: 1,515
Re: OpenCPN Beta test 4.1.1108 Release

Quote:
Originally Posted by rgleason View Post
Sometime ago Carcode suggested a program which checks your graphics card features. Do a search on the forum or look in opencpn.org documentation, perhaps supplimentary programs.
It is called GLview and is available for free also for Windows 32bit + 64bit: OpenGL Extensions Viewer

However when other software like GoogleEarth works OK with OpenGL then there are other reasons why OpenCPN fails. I still guess the so called "Optimizations" has done the bad.

Gerhard
__________________
CarCode is offline   Reply With Quote
Old 13-11-2015, 13:05   #65
Registered User
 
NahanniV's Avatar

Join Date: Mar 2011
Location: On the Boat
Boat: Finnsailer 38
Posts: 1,026
Re: OpenCPN Beta test 4.1.1108 Release

Quote:
Originally Posted by NahanniV View Post
I noticed that a few US ENC charts in my area never get displayed.
There is an entry in the chart bar, just an outline, the chart info is displayed when I hover.

US5NY25M.000 Wilson harbour is OK, but Olcott is not displayed.
US5NY23M.000 Irondequoit Bay is not displayed.

I tried deleting all the cache files, .xml files and .DAT files but it made no difference.

I don't know when this problem started.

Log File:
Code:
09:57:09: 

________
09:57:09: 2015-11-10
09:57:09:  ------- Starting OpenCPN -------
09:57:09: Version 4.1.1108 Build 2015-111-08
09:57:09: wxWidgets version: wxWidgets 3.0.2 Microsoft Windows NT 64 bit wxMSW
09:57:09: MemoryStatus:  mem_total: 4094 mb,  mem_initial: 11 mb
09:57:09: SData_Locn is C:\Program Files (x86)\OpenCPN\
09:57:09: PrivateDataDir is C:\ProgramData\opencpn\
09:57:09: Using existing Config_File: C:\ProgramData\opencpn\opencpn.ini
09:57:09: Setting Viewpoint Lat/Lon 43.3405, -78.7222
09:57:09: Setting Ownship Lat/Lon 43.1972, -79.575
09:57:09: Styles loading from C:\Program Files (x86)\OpenCPN\uidata\styles.xml
09:57:09: No styles found at: C:\ProgramData\opencpn\
09:57:09: No styles found at: C:\ProgramData\opencpn\.opencpn\
09:57:09: Detected display size (horizontal): 474 mm
09:57:09: System default Language:  en_GB
09:57:09: Opencpn language set to:  en_GB
09:57:10: Creating MyFrame...size(1176, 701)  position(-9, -9)
09:57:10: Creating glChartCanvas
09:57:10: ChartDB Cache policy:  Application target is 1024 MBytes
09:57:10: Chart cache purge
09:57:10: ChartDB Cache policy:  Application target is 1024 MBytes
09:57:11: Searching directory: C:\Users\John\Desktop\John's Stuff\Charts\US ENC for *.kap
09:57:11: Searching directory: C:\Users\John\Desktop\John's Stuff\Charts\US ENC for *.geo
09:57:11: Searching directory: C:\Users\John\Desktop\John's Stuff\Charts\US ENC for *.000
09:57:11: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US2EC03M\US2EC03M.000
09:57:11: ChartSymbols loaded from C:\Program Files (x86)\OpenCPN\s57data\chartsymbols.xml
09:57:11: Using s57data in C:\Program Files (x86)\OpenCPN\s57data
09:57:11:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US2EC03M\US2EC03M.000
09:57:11: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US2EC04M\US2EC04M.000
09:57:11:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US2EC04M\US2EC04M.000
09:57:11: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US3NY01M\US3NY01M.000
09:57:11:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US3NY01M\US3NY01M.000
09:57:11: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4CN21M\US4CN21M.000
09:57:12:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4CN21M\US4CN21M.000
09:57:12: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4CN22M\US4CN22M.000
09:57:12:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4CN22M\US4CN22M.000
09:57:12: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY13M\US4NY13M.000
09:57:12:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY13M\US4NY13M.000
09:57:12: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY1AM\US4NY1AM.000
09:57:12:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY1AM\US4NY1AM.000
09:57:12: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY1BM\US4NY1BM.000
09:57:12:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY1BM\US4NY1BM.000
09:57:12: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY1GM\US4NY1GM.000
09:57:12:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY1GM\US4NY1GM.000
09:57:12: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY1JM\US4NY1JM.000
09:57:12:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY1JM\US4NY1JM.000
09:57:12: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY20M\US4NY20M.000
09:57:12:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY20M\US4NY20M.000
09:57:12: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY22M\US4NY22M.000
09:57:12:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY22M\US4NY22M.000
09:57:12: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY23M\US4NY23M.000
09:57:12:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY23M\US4NY23M.000
09:57:12: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY24M\US4NY24M.000
09:57:12:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY24M\US4NY24M.000
09:57:12: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY25M\US4NY25M.000
09:57:12:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY25M\US4NY25M.000
09:57:12: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY26M\US4NY26M.000
09:57:12:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY26M\US4NY26M.000
09:57:12: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY32M\US4NY32M.000
09:57:12:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY32M\US4NY32M.000
09:57:12: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY33M\US4NY33M.000
09:57:12:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY33M\US4NY33M.000
09:57:12: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY38M\US4NY38M.000
09:57:12:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY38M\US4NY38M.000
09:57:12: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY53M\US4NY53M.000
09:57:13:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY53M\US4NY53M.000
09:57:13: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5CN10M\US5CN10M.000
09:57:13:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5CN10M\US5CN10M.000
09:57:13: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5MA22M\US5MA22M.000
09:57:13:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5MA22M\US5MA22M.000
09:57:13: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NJ11M\US5NJ11M.000
09:57:13:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NJ11M\US5NJ11M.000
09:57:13: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NJ12M\US5NJ12M.000
09:57:13:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NJ12M\US5NJ12M.000
09:57:13: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NJ13M\US5NJ13M.000
09:57:13:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NJ13M\US5NJ13M.000
09:57:13: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NJ14M\US5NJ14M.000
09:57:13:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NJ14M\US5NJ14M.000
09:57:13: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY11M\US5NY11M.000
09:57:13:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY11M\US5NY11M.000
09:57:13: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY12M\US5NY12M.000
09:57:13:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY12M\US5NY12M.000
09:57:13: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY14M\US5NY14M.000
09:57:13:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY14M\US5NY14M.000
09:57:13: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY15M\US5NY15M.000
09:57:13:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY15M\US5NY15M.000
09:57:13: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY16M\US5NY16M.000
09:57:13:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY16M\US5NY16M.000
09:57:13: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY17M\US5NY17M.000
09:57:14:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY17M\US5NY17M.000
09:57:14: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY19M\US5NY19M.000
09:57:14:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY19M\US5NY19M.000
09:57:14: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY1BM\US5NY1BM.000
09:57:14:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY1BM\US5NY1BM.000
09:57:14: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY1CM\US5NY1CM.000
09:57:14:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY1CM\US5NY1CM.000
09:57:14: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY1DM\US5NY1DM.000
09:57:14:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY1DM\US5NY1DM.000
09:57:14: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY1EM\US5NY1EM.000
09:57:14:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY1EM\US5NY1EM.000
09:57:14: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY1FM\US5NY1FM.000
09:57:14:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY1FM\US5NY1FM.000
09:57:14: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY1HM\US5NY1HM.000
09:57:14:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY1HM\US5NY1HM.000
09:57:14: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY1IM\US5NY1IM.000
09:57:14:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY1IM\US5NY1IM.000
09:57:14: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY22M\US5NY22M.000
09:57:14:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY22M\US5NY22M.000
09:57:14: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY23M\US5NY23M.000
09:57:14:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY23M\US5NY23M.000
09:57:14: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY24M\US5NY24M.000
09:57:14:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY24M\US5NY24M.000
09:57:14: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY25M\US5NY25M.000
09:57:14:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY25M\US5NY25M.000
09:57:14: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY27M\US5NY27M.000
09:57:14:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY27M\US5NY27M.000
09:57:14: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY28M\US5NY28M.000
09:57:15:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY28M\US5NY28M.000
09:57:15: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY29M\US5NY29M.000
09:57:15:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY29M\US5NY29M.000
09:57:15: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY30M\US5NY30M.000
09:57:15:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY30M\US5NY30M.000
09:57:15: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY31M\US5NY31M.000
09:57:15:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY31M\US5NY31M.000
09:57:15: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY33M\US5NY33M.000
09:57:15:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY33M\US5NY33M.000
09:57:15: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY34M\US5NY34M.000
09:57:15:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY34M\US5NY34M.000
09:57:15: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY35M\US5NY35M.000
09:57:15:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY35M\US5NY35M.000
09:57:15: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY36M\US5NY36M.000
09:57:15:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY36M\US5NY36M.000
09:57:15: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY40M\US5NY40M.000
09:57:15:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY40M\US5NY40M.000
09:57:15: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY42M\US5NY42M.000
09:57:15:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY42M\US5NY42M.000
09:57:15: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY43M\US5NY43M.000
09:57:15:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY43M\US5NY43M.000
09:57:15: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY44M\US5NY44M.000
09:57:15:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY44M\US5NY44M.000
09:57:15: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY50M\US5NY50M.000
09:57:15:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY50M\US5NY50M.000
09:57:15: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY52M\US5NY52M.000
09:57:16:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY52M\US5NY52M.000
09:57:16: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY53M\US5NY53M.000
09:57:16:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY53M\US5NY53M.000
09:57:16: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY61M\US5NY61M.000
09:57:16:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY61M\US5NY61M.000
09:57:16: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY62M\US5NY62M.000
09:57:16:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY62M\US5NY62M.000
09:57:16: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY63M\US5NY63M.000
09:57:16:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY63M\US5NY63M.000
09:57:16: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY64M\US5NY64M.000
09:57:16:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY64M\US5NY64M.000
09:57:16: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY65M\US5NY65M.000
09:57:16:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY65M\US5NY65M.000
09:57:16: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5RI10M\US5RI10M.000
09:57:16:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5RI10M\US5RI10M.000
09:57:16: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5VT01M\US5VT01M.000
09:57:16:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5VT01M\US5VT01M.000
09:57:16: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5VT02M\US5VT02M.000
09:57:16:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5VT02M\US5VT02M.000
09:57:16: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5VT03M\US5VT03M.000
09:57:16:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5VT03M\US5VT03M.000
09:57:16: Loading chart data for C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5VT04M\US5VT04M.000
09:57:16:    Adding chart file: C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5VT04M\US5VT04M.000
09:57:16: Searching directory: C:\Users\John\Desktop\John's Stuff\Charts\US ENC for *.s57
09:57:16: Searching directory: C:\Users\John\Desktop\John's Stuff\Charts\US ENC for 00300000.a
09:57:16: GPS Watchdog Timeout is: 6 sec.
09:57:16: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY25M\US5NY25M.000
09:57:17: Warning: iCCP: known incorrect sRGB profile
09:57:17: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY25M\US4NY25M.000
09:57:17: Preparing to apply ENC updates, target final update is   0.
09:57:17:    Warning 1: For feature "FOGSIG", attribute "PERSTA" ignored, not in expected schema.

09:57:17: OpenCPN Initialized in 8696 ms.
09:57:17: OpenGL-> Renderer String: GeForce 8800 GT/PCIe/SSE2
09:57:17: OpenGL-> Version reported:  3.3.0
09:57:17: OpenGL-> Texture rectangle format: de1
09:57:17: OpenGL-> Using Vertexbuffer Objects
09:57:17: OpenGL-> Using Framebuffer Objects
09:57:17: OpenGL-> Using FBO Stencil buffer
09:57:17: OpenGL-> Using Stencil buffer clipping
09:57:17: OpenGL-> Using Scissor Clipping
09:57:17: OpenGL-> Using s3tc dxt1 compression
09:57:17: OpenGL-> Compressed tile size: 128kb (6:1)
09:57:17: OpenGL-> Minimum cartographic line width:  1.0
09:57:17: OpenGL-> Minimum symbol line width:  1.0
09:57:17: Warning: iCCP: known incorrect sRGB profile
09:57:17: Warning: Color not found CHDRD
09:57:17: Looking for UserIcons at C:\ProgramData\opencpn\UserIcons
09:57:17: Loading navobjects from navobj.xml
09:57:17: Done loading navobjects
09:57:18: Opening NMEA Datastream TCP:0.0.0.0:2947
09:57:18: Opening NMEA Datastream TCP:ais1.shipraiser.net:6492
09:57:18: PlugInManager searching for PlugIns in location C:\Program Files (x86)\OpenCPN\plugins
09:57:19:    ***GPS Watchdog timeout at Lat:43.1972   Lon: -79.575
09:57:46: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY31M\US5NY31M.000
09:57:46: Preparing to apply ENC updates, target final update is   0.
09:57:46:    Warning 1: For feature "FOGSIG", attribute "PERSTA" ignored, not in expected schema.

09:57:46: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY24M\US4NY24M.000
09:57:46: Preparing to apply ENC updates, target final update is   0.
09:57:55: Loading World Chart Q=0 in 0 ms.
09:57:55: Background world map loaded from GSHHS datafiles found in: C:\Program Files (x86)\OpenCPN\gshhs\
09:58:00: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY24M\US5NY24M.000
09:58:05: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY23M\US4NY23M.000
09:58:05: Preparing to apply ENC updates, target final update is   0.
09:58:09: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY23M\US5NY23M.000
09:58:09: Preparing to apply ENC updates, target final update is   0.
09:58:10: LOGBOOK:  2015-11-10 14:58:10 UTC  DR Lat   43.19720 Lon  -79.57500
09:58:10: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY30M\US5NY30M.000
09:58:10: Preparing to apply ENC updates, target final update is   0.
09:58:22: Chart cache purge
09:58:22: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY23M\US5NY23M.000
09:58:23: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY23M\US4NY23M.000
09:58:24: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY30M\US5NY30M.000
09:58:26: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY24M\US4NY24M.000
09:58:31: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY22M\US4NY22M.000
09:58:31: Preparing to apply ENC updates, target final update is   0.
09:58:33: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY29M\US5NY29M.000
09:58:33: Preparing to apply ENC updates, target final update is   0.
09:58:40: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY20M\US4NY20M.000
09:58:44: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY27M\US5NY27M.000
09:58:48: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US2EC03M\US2EC03M.000
09:58:51: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US2EC04M\US2EC04M.000
09:58:51: Preparing to apply ENC updates, target final update is   0.
09:58:51:    Warning 1: While applying update 1, an update to RCNM=130,RCID=61973 failed.
09:58:51:    Warning 1: While applying update 1, an update to RCNM=130,RCID=62295 failed.
09:58:51:    Warning 1: While applying update 1, an update to RCNM=130,RCID=62510 failed.
09:58:54: Datastream connection lost: TCP:ais1.shipraiser.net:6492
09:59:00: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY65M\US5NY65M.000
09:59:03: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY64M\US5NY64M.000
09:59:06: Datastream connection lost: TCP:ais1.shipraiser.net:6492
09:59:11: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY63M\US5NY63M.000
09:59:16: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY62M\US5NY62M.000
10:00:00: LOGBOOK:  2015-11-10 15:00:00 UTC  DR Lat   43.19720 Lon  -79.57500
10:04:16: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US3NY01M\US3NY01M.000
10:04:16: Preparing to apply ENC updates, target final update is   0.
10:04:16:    Warning 1: While applying update 1, an update to RCNM=130,RCID=6207 failed.
10:04:16:    Warning 1: While applying update 1, an update to RCNM=130,RCID=7629 failed.
10:04:16:    Warning 1: While applying update 1, an update to RCNM=130,RCID=7705 failed.
10:04:16:    Warning 1: While applying update 1, an update to RCNM=130,RCID=7731 failed.
10:04:16:    Warning 1: While applying update 1, an update to RCNM=130,RCID=7739 failed.
10:04:16:    Warning 1: While applying update 1, an update to RCNM=130,RCID=7795 failed.
10:04:16:    Warning 1: While applying update 1, an update to RCNM=130,RCID=7871 failed.
10:04:16:    Warning 1: While applying update 1, an update to RCNM=130,RCID=7918 failed.
10:04:16:    Warning 1: While applying update 1, an update to RCNM=130,RCID=8166 failed.
10:04:16:    Warning 1: While applying update 6, an update to RCNM=130,RCID=8172 failed.
10:04:21: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY38M\US4NY38M.000
10:04:25: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY25M\US4NY25M.000
10:04:25: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY32M\US4NY32M.000
10:04:25: Preparing to apply ENC updates, target final update is   0.
10:04:26:    Warning 1: For feature "FOGSIG", attribute "PERSTA" ignored, not in expected schema.

10:04:27: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY33M\US4NY33M.000
10:04:27: Preparing to apply ENC updates, target final update is   0.
10:04:28: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY26M\US4NY26M.000
10:04:36: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY25M\US5NY25M.000
10:06:10: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY31M\US5NY31M.000
10:06:14: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY24M\US5NY24M.000
10:06:53: Chart cache purge
10:06:54: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY23M\US4NY23M.000
10:06:59: Chart cache purge
10:06:59: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY30M\US5NY30M.000
10:06:59: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY23M\US4NY23M.000
10:07:02: Chart cache purge
10:07:02: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY23M\US5NY23M.000
10:07:03: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY23M\US4NY23M.000
10:07:12: Chart cache purge
10:07:12: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY23M\US5NY23M.000
10:07:12: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY23M\US4NY23M.000
10:07:13: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY30M\US5NY30M.000
10:08:37: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY24M\US4NY24M.000
10:08:39: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY22M\US4NY22M.000
10:08:43: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY22M\US5NY22M.000
10:08:43: Preparing to apply ENC updates, target final update is   0.
10:08:53: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY28M\US5NY28M.000
10:08:53: Preparing to apply ENC updates, target final update is   0.
10:08:56: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY20M\US4NY20M.000
10:08:56: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US2EC03M\US2EC03M.000
10:08:58: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY25M\US4NY25M.000
10:08:58: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY32M\US4NY32M.000
10:08:59: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY26M\US4NY26M.000
10:09:06: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US4NY38M\US4NY38M.000
10:09:10: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY31M\US5NY31M.000
10:09:10: Initializing Chart C:\Users\John\Desktop\John's Stuff\Charts\US ENC\ENC_ROOT\US5NY25M\US5NY25M.000
I Re-Installed 4.0.0 and tried this with the same charts, no problem.
During install I chose "Reset all config files".

Then I Re-Installed 1108 also resetting all config files, and the problem returned.

First Pic is 4.0.0, second is 1108.
Attached Thumbnails
Click image for larger version

Name:	OllcotNY.jpg
Views:	63
Size:	234.6 KB
ID:	112936   Click image for larger version

Name:	Ollcot1108.jpg
Views:	64
Size:	226.3 KB
ID:	112937  

__________________
NahanniV is offline   Reply With Quote
Old 13-11-2015, 14:44   #66
Registered User

Join Date: Oct 2014
Posts: 91
Re: OpenCPN Beta test 4.1.1108 Release

RE: Post #65 by NahanniV

OpenCPN 4.1.925 does not display US5NY25M with quilting ON. It only displays US4NY25M in the quilt. Zooming in and clicking on "US5NY25M" in the chart bar does not display US5NY25M. US5NY25M is displayed with quilting OFF.

OpenCPN 4.1.915 (my build for Windows) does display US5NY25M and US4NY25M with quilting ON.

Paul
__________________
.Paul. is offline   Reply With Quote
Old 13-11-2015, 15:14   #67
Registered User

Join Date: Sep 2009
Location: Angers - France
Boat: Beneteau First 29 Ptizef
Posts: 730
Re: OpenCPN Beta test 4.1.1108 Release

Hi Dave

Using last git, I got some bad CM93 display I've never seen before
It's easy to reproduce and happens on three different environments and two different machines : W10/AMD Radeon HD 8180, Vista/Intell (R)4, Kubuntu 14.04/ same machine. CM93 2009 and 2011.

Go to 60N,40E and zoom / drag around.

see screen shot W10 and Linux

Jean Pierre

Click image for larger version

Name:	<a title=linux.png Views: 46 Size: 112.2 KB ID: 112948" style="margin: 2px" />

Click image for larger version

Name:	w10.jpg
Views:	46
Size:	195.7 KB
ID:	112949
__________________
Ptizef is offline   Reply With Quote
Old 13-11-2015, 15:17   #68
Registered User
 
NahanniV's Avatar

Join Date: Mar 2011
Location: On the Boat
Boat: Finnsailer 38
Posts: 1,026
Re: OpenCPN Beta test 4.1.1108 Release

Quote:
Originally Posted by .Paul. View Post
RE: Post #65 by NahanniV

OpenCPN 4.1.925 does not display US5NY25M with quilting ON. It only displays US4NY25M in the quilt. Zooming in and clicking on "US5NY25M" in the chart bar does not display US5NY25M. US5NY25M is displayed with quilting OFF.

OpenCPN 4.1.915 (my build for Windows) does display US5NY25M and US4NY25M with quilting ON.

Paul
Thanks, I didn't think of turning off quilting, that works.

I think the problem is related to this particular type of chart with two separate chartlets in one. The other chart I mentioned is similar.
Attached Thumbnails
Click image for larger version

Name:	Ollcot_and_Wilson.jpg
Views:	49
Size:	61.7 KB
ID:	112950  
__________________
NahanniV is offline   Reply With Quote
Old 13-11-2015, 15:32   #69
Registered User

Join Date: Nov 2012
Location: Orust Sweden
Boat: Najad 34
Posts: 1,643
Re: OpenCPN Beta test 4.1.1108 Release

Win10 and XP missing detailed levels in CM93 vector charts.

There's, again, a miss in details using cm93. It's hard to find the words to describe what happens so I've attached a video.
While navigating on a course where several chart levels are present the level of details is occasionally missed in different parts of the charts. This is a huge difference compared to OCPN ver-4.0.
The attached video shows a VDR replay on 4.0 and 4.1.1108. 4.0 is on the left and 4.1.1108 to the right. While 4.0 shows all details all the time 4.1.1108 very often miss details. Both sessions use the same vector data base and incoming NMEA streams are the same.

First time I load a video, let's see if it works or needs more compression.
If not it's also here: https://dl.dropboxusercontent.com/u/...113_224359.mp4

Håkan
Attached Files
__________________
Hakan is offline   Reply With Quote
Old 13-11-2015, 16:54   #70
Marine Service Provider
 
bdbcat's Avatar

Join Date: Mar 2008
Posts: 4,492
Re: OpenCPN Beta test 4.1.1108 Release

Håkan...

Please post the VDR file so we can reproduce this effect exactly and reproducibly.

Thanks
Dave
__________________
bdbcat is offline   Reply With Quote
Old 13-11-2015, 17:42   #71
Registered User

Join Date: Jun 2014
Posts: 9
Re: OpenCPN Beta test 4.1.1108 Release

Hi,
I downloaded the files recently and could compile without much problems on Debian 8.2. On first test it runs smoothly and is very responsive.

For a while I have been specially interested in chart projections and therefore wrote a little test progam for the projection routines in georef. The program reads a pair of (lat,lon) coordinates from standard input, converts to (easting,northing) and back to (lat,lon). I found that the results for polyconic projection are totally weird and some others also did't reverse well.
Looking at the code of georef (and studying the "Geological Survey Bulletin 1532" by J.P.Snyder, where most of the algorhythms seem to stem from) I noticed a couple of oddities and errors:

georef.h
--------
toTM: the data type of the arguments is float, while the other functions use double and all calculations are made in double

georeff.cpp
-----------
toPOLY: formulas 15-2, 15-3 and 15-4 are not coded correctly (page 128).
The effect is, that in formula 15-4 factor 'E' is wrong (sin phi not applied).
fromPOLY: iteration (formula 15-21) is also not correctly implemented, termination criterion not correct

from SM_ECC: the series solution is not very precise, iteration is much better.

in the routines for SM, SM_ECC, POLY the radius is multiplied with a factor k0_mercator of value 0.9996. In TM, you use a factor of 1.0. This doesn't make much sense to me. It seems, that someone just copied the boilerplate line "radius * k0_mercator".
According to Snyder, a factor k0=0.9996 is only in the context of TM. This is because TM is not true scale on the equator and to minimise some distortions.
In all other cases, the projection of an angle of 1' (one minute) on the equator should give 2piR/360/60. From my opinion, this k0 factor therefore needs to be taken out and applied in TM (exactly opposite from what it is now).
I made all changes as above, ran the test again and the results are much better.
The file test.c also contains a version of POLY_ECC.

I hope this makes sense,
Juergen
Attached Files
__________________
juehoe is offline   Reply With Quote
Old 14-11-2015, 00:06   #72
Registered User

Join Date: Nov 2012
Location: Orust Sweden
Boat: Najad 34
Posts: 1,643
Re: OpenCPN Beta test 4.1.1108 Release

Dave,
The VDR used is here: https://dl.dropboxusercontent.com/u/.../Hakefjord.txt
Håkan
__________________
Hakan is offline   Reply With Quote
Old 14-11-2015, 05:57   #73
Registered User
 
NahanniV's Avatar

Join Date: Mar 2011
Location: On the Boat
Boat: Finnsailer 38
Posts: 1,026
Re: OpenCPN Beta test 4.1.1108 Release

Quote:
Originally Posted by .Paul. View Post
RE: Post #65 by NahanniV

OpenCPN 4.1.925 does not display US5NY25M with quilting ON. It only displays US4NY25M in the quilt. Zooming in and clicking on "US5NY25M" in the chart bar does not display US5NY25M. US5NY25M is displayed with quilting OFF.

OpenCPN 4.1.915 (my build for Windows) does display US5NY25M and US4NY25M with quilting ON.

Paul
Paul,

In 4.1.925 with quilting on, is the Wilson part (West part) of US5NY25M displayed ?

Cheers,
JM.
__________________
NahanniV is offline   Reply With Quote
Old 14-11-2015, 07:24   #74
Registered User

Join Date: Oct 2014
Posts: 91
Re: OpenCPN Beta test 4.1.1108 Release

JM,

The western part of US5NY25M quilts with US4NY25M in OpenCPN 4.1.925 (beta).

The eastern part does not quilt.

Both western and eastern parts of US5NY25M quilt in 4.1.915 (my build)and 4.1.602 (beta).

Paul
__________________
.Paul. is offline   Reply With Quote
Old 14-11-2015, 07:26   #75
Registered User

Join Date: Feb 2011
Posts: 377
Re: OpenCPN Beta test 4.1.1108 Release

[QUOTE=NahanniV;1962079]Paul,

In 4.1.925 with quilting on, is the Wilson part (West part) of US5NY25M displayed ?

I confirm that on Nobeltec Admiral, version prior to removal S57, both charts ar shown with quilting on or off.
Best regards.
__________________

__________________
P_Dub is offline   Reply With Quote
Reply

Tags
enc, lease, opencpn

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
OpenCPN Beta test 4.1.1022 Release bdbcat OpenCPN 122 07-11-2015 02:12
OpenCPN Beta test 4.1.925 Release bdbcat OpenCPN 177 04-11-2015 09:16
OpenCPN Beta test 4.1.602 Release bdbcat OpenCPN 193 13-10-2015 09:19
OpenCPN Version 2.2 Beta Test bdbcat OpenCPN 437 15-12-2010 20:17
OpenCPN Version 2.2 Beta Test Bugs / Discussion bdbcat OpenCPN 120 26-09-2010 03:53


Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 12:53.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.