|
|
29-03-2019, 02:24
|
#1
|
Registered User
Join Date: Jan 2018
Location: Binic (France)
Boat: Dufour 45 Classic - 13.7m
Posts: 6
|
OpenCPN 5 and oeSENC - oeserved
Hi
After several installations, with a hardware configuration (NUC i5 - W10) that was working in 4.8.8, I have the message "Cannot find the oserverd utility at {}"
The application can't start correctly. I use the by default choices for the installation (path), and I have only the oeSENC plugin installed.
I have installed the maps by downloading with the utility provided within OpenCPN and separately (by direct installation in the right dossiers - like for 4.8.8)
The issue was already observed in the draft version of the 5.0 (so 4.9...)
Thank you for your help.
Regards
Didier
|
|
|
29-03-2019, 02:30
|
#2
|
Registered User
Join Date: May 2011
Location: underway whenever possible
Boat: Rangeboat 39
Posts: 4,683
|
Re: OpenCPN 5 and oeSENC - oeserved
Can we please see the log file?
In case you don't want to publish it in public you can drop it to o-charts as an alternative.
Hubert
|
|
|
29-03-2019, 03:11
|
#3
|
Registered User
Join Date: Jan 2018
Location: Binic (France)
Boat: Dufour 45 Classic - 13.7m
Posts: 6
|
Re: OpenCPN 5 and oeSENC - oeserved
Thanks for your quick answer. Enclosed is the logfile
Didier
|
|
|
29-03-2019, 03:23
|
#4
|
Registered User
Join Date: May 2011
Location: underway whenever possible
Boat: Rangeboat 39
Posts: 4,683
|
Re: OpenCPN 5 and oeSENC - oeserved
Mmmh, don't see anything special in the log.
Can you check with the Windows task manager if oeserved is running?
|
|
|
29-03-2019, 03:34
|
#5
|
Registered User
Join Date: Jan 2018
Location: Binic (France)
Boat: Dufour 45 Classic - 13.7m
Posts: 6
|
Re: OpenCPN 5 and oeSENC - oeserved
No, oeserved is not in the list.
perhaps an additional information: when I try to update the list of oeSENC maps (by the last tab of Options, I have the msg 'l'application n'a pas réussi à démarrer correctement 0xc000007b
|
|
|
29-03-2019, 06:23
|
#6
|
Marine Service Provider
Join Date: Mar 2008
Posts: 7,384
|
Re: OpenCPN 5 and oeSENC - oeserved
didier...
We need to see more of the logfile, while an oeSENC chart is actually attempting to load. What we have so far is entirely normal. The oeserverd is present, and runs correctly during oeSENC initialization.
Thanks
Dave
|
|
|
29-03-2019, 16:48
|
#7
|
Registered User
Join Date: Apr 2018
Posts: 16
|
Re: OpenCPN 5 and oeSENC - oeserved
Hello everyone,
I have the same problem. Plus, the new nv plugin does not recognise charts at all.
(windows10)
thanks for any advice,
prosp.
|
|
|
29-03-2019, 17:53
|
#8
|
Marine Service Provider
Join Date: Mar 2008
Posts: 7,384
|
Re: OpenCPN 5 and oeSENC - oeserved
prospero68...
And the same applies.
We could examine the logfile immediately after a chart has failed to load, for whatever reason. You could too...
Thanks
Dave
|
|
|
29-03-2019, 18:38
|
#9
|
Registered User
Join Date: Apr 2018
Posts: 16
|
Re: OpenCPN 5 and oeSENC - oeserved
Hello,
I have attached a logfile copy. While loading with English selected, oc crashed. With german language selected, the screen froze. NV charts plugin does not work, either. The charts do not even appear in the charts bar, although the database has been built. I regret having upgraded to oc 5.0 and decided to go back to 4.8.8 when everything worked just fine, but it is not available on source forge. What can I do ti get my system running again? Best regards,
prospero68
|
|
|
29-03-2019, 19:14
|
#10
|
Marine Service Provider
Join Date: Mar 2008
Posts: 7,384
|
Re: OpenCPN 5 and oeSENC - oeserved
Prospero68...
If you are willing to help, we can learn more about this problem seen on some systems.
Do this:
1. On windows, open a CMD box.
2. Execute the following commands:
Code:
c:
cd "\Program Files\OpenCPN\plugins\oesenc_pi"
oeserverd -a
Report results. Should respond similar to attachment (with your paths, etc.).
Thanks
Dave
|
|
|
30-03-2019, 00:19
|
#11
|
Registered User
Join Date: Apr 2018
Posts: 16
|
Re: OpenCPN 5 and oeSENC - oeserved
Hello Dave,
when executing these commands I keep getting the same error messages saying:"MSVCP.dll not found" and "MSVCR.dll not found"
Apart from that, no results.
Could you please give me a hint as to where I can find a windows version of OC 4.8.8 to downgrade?
Best,
prosp
|
|
|
30-03-2019, 01:55
|
#12
|
Registered User
Join Date: May 2011
Location: underway whenever possible
Boat: Rangeboat 39
Posts: 4,683
|
Re: OpenCPN 5 and oeSENC - oeserved
Quote:
Originally Posted by prospero68
Hello Dave,
when executing these commands I keep getting the same error messages saying:"MSVCP.dll not found" and "MSVCR.dll not found"
|
This can be an indicator of some 4.8.x plug-in installed instead of v5.0 plug-ins.
What you might try is to disable the plug-ins and enable them one-by-one in order to isolate the "culprit".
|
|
|
30-03-2019, 05:31
|
#13
|
Marine Service Provider
Join Date: Mar 2008
Posts: 7,384
|
Re: OpenCPN 5 and oeSENC - oeserved
prosp....
OK, thanks for the exercise. This is useful information.
Meanwhile, 4.8.8 is still available:
http://download.opencpn.org/4.8.8/op....8.8_setup.exe
Dave
|
|
|
30-03-2019, 05:43
|
#14
|
Registered User
Join Date: Apr 2018
Posts: 16
|
Re: OpenCPN 5 and oeSENC - oeserved
Hi Dave,
I have already uninstalled all the the old plugins before installing the new ones designated for OC 5.
Same results. The culprit seems to be oesenc.pi
Thanks for your help and the download link!
I will go with that on my backup machine until I finished debugging the new version.
Best,
Christian
|
|
|
30-03-2019, 05:55
|
#15
|
Marine Service Provider
Join Date: Mar 2008
Posts: 7,384
|
Re: OpenCPN 5 and oeSENC - oeserved
Christian...
OK, fine. Should have a new oesenc_pi overnight.
Dave
|
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Rate This Thread |
Linear Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Advertise Here
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
Vendor Spotlight |
|
|
|