Cruisers Forum
 


Join CruisersForum Today

Closed Thread
 
Thread Tools Rating: Thread Rating: 4 votes, 4.75 average. Display Modes
Old 20-08-2009, 22:41   #676
Marine Service Provider
 
bdbcat's Avatar

Join Date: Mar 2008
Posts: 4,883
jpiebrig...

Please, again, what is the contents of opencpn.conf?

Dave
__________________

__________________
bdbcat is offline  
Old 21-08-2009, 06:33   #677
Registered User

Join Date: Aug 2009
Posts: 183
Dave, here is my opencpn.conf :

[ChartDirectories]
ChartDir1=/home/jp/Cartes
[Settings]
ShowDebugWindows=1
ShowPrintIcon=0
SetSystemTime=0
ShowDepthUnits=1
AutoAnchorDrop=0
ShowChartOutlines=0
GarminPersistance=0
PlanSpeed=0
[Settings/GlobalState]
VPLatLon=" 16.4477, -73.5461"
VPScale=0.000838436
bFollow=0
nColorScheme=0
FrameWinX=1668
FrameWinY=996
FrameMax=0
bShowS57Text=1
bShowS57ImportantTextOnly=0
nDisplayCategory=79
nSymbolStyle=82
nBoundaryStyle=79
bShowSoundg=0
bShowMeta=0
bUseSCAMIN=0
bShowAtonText=0
bShowLightDescription=0
bDeClutterText=0
S52_MAR_SAFETY_CONTOUR=8
S52_MAR_SHALLOW_CONTOUR=3
S52_MAR_DEEP_CONTOUR=10
S52_MAR_TWO_SHADES=1
S52_DEPTH_UNIT_SHOW=1
[Settings/AIS]
bNoCPAMax=0
NoCPAMaxNMi=0
bCPAWarn=0
CPAWarnNMi=0
bTCPAMax=0
TCPAMaxMinutes=0
bMarkLostTargets=0
MarkLost_Minutes=0
bRemoveLostTargets=0
RemoveLost_Minutes=0
bShowCOGArrows=0
CogArrowMinutes=0
bShowTargetTracks=0
TargetTracksMinutes=0
bShowMooredTargets=0
MooredTargetMaxSpeedKnots=0
bAISAlertDialog=0
bAISAlertAudio=0
AISAlertAudioFile=
AlertDialogSizeX=400
AlertDialogSizeY=400
AlertDialogPosX=400
AlertDialogPosY=400
[Settings/NMEADataSource]
Source=None
[Settings/NMEAAutoPilotPort]
Port=None
[Settings/WiFiServer]
Server=NONE
[Settings/AISPort]
Port=None
[Settings/GTKFonts]
FontConsoleLegend=Console Legend:Sans 12
FontConsoleValue=Console Value:Sans 12
FontMarks=Marks:Sans 12
[Settings/Others]
ShowGPXIcons=0
ShowRadarRings=0
RadarRingsNumberVisible=1
RadarRingsStep=1
RadarRingsStepUnits=0
WaypointPreventDragging=0
[Settings/ObjectFilter]
vizM_PROD=1
vizM_COVR=1
vizLNDARE=1
vizDEPARE=1
vizCOALNE=1
vizDEPCNT=1
viz_texto=1
vizLAKARE=1
vizLAKSHR=1
vizUWTROC=1
vizRIVERS=1
viz\$LINES=1
vizRIVBNK=1
viz\$AREAS=1
vizSEAARE=1
vizDMPGRD=1
vizCTNARE=1
vizBRIDGE=1
vizSLCONS=1
vizZEMCNT=1
vizOBSTRN=1
vizWRECKS=1
vizBUISGL=1
vizBUAARE=1
vizCHIMNY=1
vizSBDARE=1
vizTNKCON=1
vizTOWERS=1
vizBCNSPP=1
vizBOYSPP=1
vizLIGHTS=1
vizPILPNT=1
vizRADRFL=1
vizRTPBCN=1
vizRDOSTA=1
viz\$COMPS=1
viz_extgn=1
vizSOUNDG=1
vizLITHOU=1
vizNAMFLO=1
vizNAMFIX=1
vizLNDRGN=1
vizAIRARE=1
vizCBLSUB=1
vizACHARE=1
vizFORSTC=1
vizBOYLAT=1
vizBOYSAW=1
vizPILBOP=1
vizNATARE=1
vizTSSLPT=1
vizTSEZNE=1
vizWATTUR=1
vizTSSBND=1
vizBUIREL=1
vizOFSPLF=1
[Directories]
S57DataLocation=/usr/local/share/opencpn/s57data
SENCFileLocation=/home/jp/.opencpn/SENC
PresentationLibraryData=
InitChartDir=/home/jp/Cartes
GPXIODir=
[Marks]
[Marks/MarkDefn9]
RoutePoint=15.516451,-79.360886
RoutePointName=008
RoutePointIcon=diamond
RoutePointGUID=155164-793608-1250824822
RoutePointProp=1,1
RoutePointNameLocationOffset=-10,8
[Marks/MarkDefn8]
RoutePoint=15.984850,-78.441612
RoutePointName=007
RoutePointIcon=diamond
RoutePointGUID=159848-784416-1250824819
RoutePointProp=1,1
RoutePointNameLocationOffset=-10,8
[Marks/MarkDefn5]
RoutePoint=24.186380,-66.022408
RoutePointName=005
RoutePointIcon=diamond
RoutePointGUID=241863-660224-1250824740
RoutePointProp=1,1
RoutePointNameLocationOffset=-10,8
[Marks/MarkDefn4]
RoutePoint=18.412512,-64.472260
RoutePointName=004
RoutePointIcon=diamond
RoutePointGUID=224317-681133-1250824738
RoutePointProp=1,1
RoutePointNameLocationOffset=-10,8
[Marks/MarkDefn3]
RoutePoint=17.898685,-70.240250
RoutePointName=003
RoutePointIcon=diamond
RoutePointGUID=214956-755035-1250824737
RoutePointProp=1,1
RoutePointNameLocationOffset=-10,8
[Marks/MarkDefn7]
RoutePoint=17.004541,-72.439293
RoutePointName=NM002
RoutePointIcon=diamond
RoutePointGUID=170045-724392-1250824807
RoutePointProp=1,1
RoutePointNameLocationOffset=-10,8
[Marks/MarkDefn2]
RoutePoint=16.279207,-74.530190
RoutePointName=002
RoutePointIcon=diamond
RoutePointGUID=162792-745301-1250824736
RoutePointProp=1,1
RoutePointNameLocationOffset=-10,8
[Marks/MarkDefn1]
RoutePoint=13.877604,-78.928284
RoutePointName=001
RoutePointIcon=diamond
RoutePointGUID=138776-789282-1250824735
RoutePointProp=1,1
RoutePointNameLocationOffset=-10,8
[Routes]
[Routes/RouteDefn1]
RoutePoints=8
RouteName=Test
RouteStart=nulle part
RouteEnd=ne sait pas
RoutePointID1=155164-793608-1250824822
RoutePointID2=159848-784416-1250824819
RoutePointID3=241863-660224-1250824740
RoutePointID4=224317-681133-1250824738
RoutePointID5=214956-755035-1250824737
RoutePointID6=170045-724392-1250824807
RoutePointID7=162792-745301-1250824736
RoutePointID8=138776-789282-1250824735
__________________

__________________
jpiebrig is offline  
Old 21-08-2009, 07:41   #678
Registered User
 
manimaul's Avatar

Join Date: Feb 2008
Location: Seattle, WA
Posts: 416
Track and MOB

Track and MOB icons:








As usual, all icons are here: oxygen_opencpn.zip

Quote:
Originally Posted by bdbcat View Post
Manimaul....

Also, the icon xpm files need, for example
static const char *gpx_export[] = {
instead of
static char *gpx_export[] = {

Dave
Yes, I noticed all of the compiler warnings on this also. In fact, compile failed if the XPMs had any transparency. I'll have to look into a better PNG to XPM conversion utility that is scriptable or fix it manually. I'm using ImageMagick's convert now.

Will
__________________
manimaul is offline  
Old 21-08-2009, 10:36   #679
Senior Cruiser
 
sinbad7's Avatar

Cruisers Forum Supporter

Join Date: Sep 2003
Location: Ubatuba,SP,Brazil (Ex Norway)
Boat: (Ex) Alu. 60' yacht-"Eight Bells"
Posts: 2,717
Images: 57
Send a message via Skype™ to sinbad7
Manimaul..

Yes,great icons, can't wait to see the new release of OpenCPN
And the free Inkscape vector graphics prog. is incredible.
I have been using Micrografx Designer program for some time and also CorelDraw, but
Inkscape seems to have it all. Just takes some time to get into. Thanks a lot...
__________________
sinbad7 is offline  
Old 21-08-2009, 10:47   #680
Registered User

Join Date: Dec 2005
Location: WNA
Boat: Dufour 35
Posts: 3,248
Version with new icons available in the CVS on SorceForge.
Attached Thumbnails
Click image for larger version

Name:	snapshot46.png
Views:	133
Size:	133.7 KB
ID:	9472  
__________________
cagney is offline  
Old 21-08-2009, 11:28   #681
Senior Cruiser
 
sinbad7's Avatar

Cruisers Forum Supporter

Join Date: Sep 2003
Location: Ubatuba,SP,Brazil (Ex Norway)
Boat: (Ex) Alu. 60' yacht-"Eight Bells"
Posts: 2,717
Images: 57
Send a message via Skype™ to sinbad7
The new version is NOT in SourceForge as yet. The latest upload to SourceForge was 2009-07-11 ? I downloaded and got v. 1.3.2 ??
__________________
sinbad7 is offline  
Old 21-08-2009, 12:03   #682
Registered User

Join Date: Dec 2005
Location: WNA
Boat: Dufour 35
Posts: 3,248
Sinbad you are referring to the compiled versions, while I was talking about changes in the source code repository, that you can download and compile yourself. Not a big deal if you're on Linux.
Check here for more info.
Latest change was
Quote:
2009-08-21 03:18:42 UTC by bdbcat
covering 17 files.

Thomas
__________________
cagney is offline  
Old 21-08-2009, 12:10   #683
Senior Cruiser
 
sinbad7's Avatar

Cruisers Forum Supporter

Join Date: Sep 2003
Location: Ubatuba,SP,Brazil (Ex Norway)
Boat: (Ex) Alu. 60' yacht-"Eight Bells"
Posts: 2,717
Images: 57
Send a message via Skype™ to sinbad7
Thomas.. OK, I understand,but as I am not into Linux I'll wait for the official upgrade promised at the weekend. Looking good though...
__________________
sinbad7 is offline  
Old 21-08-2009, 13:44   #684
Marine Service Provider
 
bdbcat's Avatar

Join Date: Mar 2008
Posts: 4,883
jpiebrig....

It freezes in "Tools"?
Does it freeze when you first enter tools,
or when you touch a tab (such as "Charts", "AIS', etc),
or when you touch OK Button,
or when you touch Cancel Button?

Config file looks OK
Dave
__________________
bdbcat is offline  
Old 21-08-2009, 17:23   #685
Registered User

Join Date: Aug 2009
Posts: 183
Dave,
For instant it freezes only with the "Tools", it doesn't freezes when I open the "Tools", but after when :
* I press either the OK or Cancel Button of the "Tools" : immediatly
* I try to choose any options, whatever is the tab : immediatly

It doen't freeze when :

* I switch from a tab to an other.
* I look at any drop-down menu

* It doesn't freeze immediatly when I close the "Tools" using the Red Cross - Close the window, and then I can open charts and switch from one to another, I can zoom in and out with the scrolling button.
But If I try to create a route or to use any fonction, Scale In, Scale Out, Zoom In, Zoom Out, etc., it frezes immediatly.
Why it doesn't freeze with the scrolling button and it does with the icons Zoom In and Out, I don't know !
If I have not open the "Tools" before I can use the icons normally.
__________________
jpiebrig is offline  
Old 21-08-2009, 18:16   #686
Registered User
 
manimaul's Avatar

Join Date: Feb 2008
Location: Seattle, WA
Posts: 416
Quote:
Originally Posted by jpiebrig View Post
Dave,
For instant it freezes only with the "Tools", it doesn't freezes when I open the "Tools", but after when :
I can attest to the freeze in Linux as well using version 1.3.2

I'm not having any freeze issue with self compiled cvs. I will compile you a cvs .deb if you are using Ubuntu jpiebrig or give you instruction on how to do it. Just let me know if you are interested.

Will
__________________
manimaul is offline  
Old 21-08-2009, 18:44   #687
Marine Service Provider
 
bdbcat's Avatar

Join Date: Mar 2008
Posts: 4,883
Manimaul...

So I am clear:

a) The 1.3.2 sourceforge .deb freezes on toolbox, as described.

b) Fresh build from CVS sources as of today works OK.
or
c) Build from sourceforge 1.3.2 tar (NOT CVS)works OK

Is this right? Or some combination?

Dave
__________________
bdbcat is offline  
Old 21-08-2009, 19:21   #688
Registered User

Join Date: Aug 2009
Posts: 183
For me both .deb and tar.gz2 are freezing. But I am going to do a last try with tar.gz2.

Yes Manimaul, I am using Ubuntu Jaunty and I will be glad to know how to compile a cvs.deb. Thank you in advance.
__________________
jpiebrig is offline  
Old 21-08-2009, 20:05   #689
Marine Service Provider
 
bdbcat's Avatar

Join Date: Mar 2008
Posts: 4,883
Beta 821 available

Hello All...

Opencpn Version 1.3.3 Beta Build 821 is now available at

opencpnbeta

Here is the Changelog: (post Build 728)

20. Improve Route and Waypoint selection/deletion logic
21. Improve Waypoint calculations near Intl. Date Line (180 ELon).
22. Change Measure Tool mouse interface.
23. Implement Tracking, enable on Toolbox->Etc......
24. Add ability to suppress AIS Alerts from moored targets
25. Correct/Improve font selection logic for Nav Console
26. Linux builds, add support for /dev/rfcomm devices, e.g. Bluetooth GPS
27. Help file opens system default browser instead of internal HTML viewer.
28. Implement rt-click "Delete All Routes", "Delete All Waypoints"
29. Implement rt-click "Move Boat Here" as an assist to planning without GPS input.
30. On CM93 charts, with "Show Chart Outlines", show next finer scale cell outlines (experimental)
31. New icons Comments solicited.
32. Tweak AIS dialog
33. Support partial or incomplete CM93 datasets.
----------Publish Beta 1.3.3 Build 821---------


A couple of things to note here:

1. Windows beta is now built with Microsoft tools. This makes the .exe a bit larger, but probably improves the speed due to MSVC's better code optimization algorithms.
On the other hand, we could regress into "DLL Hell". If you have been there, you know what I mean.
Consider this build an experiment, and send comments regarding perceived performance differences, as well as any DLL problems noted. Experienced developers comments re MS vs. Watcom tools encouraged.

2. Note # 29 above. Try this, and let me know if it helps in route planning, etc.

3. There were, unfortunately, lots of pervasive changes, which means the chances of old features becoming broken is increased. Test thoroughly, please. Check out your favorite feature/location/chart type, and try to break it.

4. CVS source code tree is up-to-date.

5. I consider us feature-complete for an official release of Version 1.4.0 pending resolution of any problems discovered in this test.

Thanks again for all your help and input. You guys (and gals?) are a great group of Beta testers!

Good luck
Dave
__________________
bdbcat is offline  
Old 21-08-2009, 20:44   #690
Registered User

Join Date: Oct 2008
Location: San Diego, CA
Boat: Beneteau Oceanis 38.1
Posts: 244
Dave, thanks for the beta.

I just trying installing it over the previous beta and over a clean 1.3.2 install, both on Vista. In both cases only ENC charts work. Neither CM93 or BSB charts will load. I was getting CM93 charts initially, which is what I had the previous beta configured to use. I deleted the CM93 entry from the chart list to try ENCs by themselves, and from that point on I've been unable to get CM93 to work (and BSBs don't load at all). Backing up to the previous beta (over a clean 1.3.2 baseline install) still works.
__________________

__________________
gjorgensen is offline  
Closed Thread

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 19:56.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.