Hide Waypoint?

[silentwings39]

I have a range of waypoints, many used as marks to mark specific items. Sadly this can start to cause a lot of clutter which it would be nice to hide unless required.

Is there a simple way to hide/unhide waypoints within Opencpn?
For routes and tracks, this can be done by clicking the eye symbol.
The only way I can find with waypoints is to tick/untick the show on chart box in the extended properties tab, which is a bit cumbersome. It is then however impossible to see which ones are visible/invisible from the waypoints tab in Route Manager.

It would be nice if there was a "show eye" as in routes and tracks.

It would also be nice to hide/unhide multiple selections of routes, tracks & waypoints.

Many thanks

[silentwings39]

Wow! Just updated from 3.2.2 to 3.3.1419.
The hide/unhide waypoints seems to have been implemented. That helps me a lot.

Guess I should've checked first!

Would still like to see the ability to hide/unhide multiple selections.

[wdkester]

If you keep your navigational marks and your informational marks (POI) separate then you can load POI as a layer and turn them on and off like a route. Much easier I think.