Thanks for the correction. Please use Tracker for items that are bugs or feature requests, as I may not have kept up with what you've found out. Also use the comments section for specific items in tracker. Thanks very much!
Quote:
Originally Posted by NAV Remarks on plugin:
1. Once data are entered and accepted, it's still not possible to change this later, e.g. when input errors are made.
2. Dates entered as e.g. 1957-08-04 (august 4, 1957) is changed by plugin after restart to 1957-04-08 (april 8, 1957). Must be related to different standards in date notation in US and Europe, I think.
------
Although a few days ago I definitely experienced both above mentioned problems, today these are gone. Don't ask me why ...
Hereby sun and moon.
Text and screencopies in one pdf.
I closed OPCN unintendet. After reopening moon was lower limb (difference is not big)
Using your data for sun and moon in the plugin, I found a slightly different position (while under the computation tab all correction values were identical and the almanac derived data were slightly different; this is strange):
I found:
Lat 35 07.6 N
Lon 020 45.5 W
You found:
Lat 35 08.7 N
Lon 020 43.0 W
You found using DSV:
Lat 35 11.9 N
Lon 020 43.7 W
Moon was very low, which means that corrections for parallax should be applied as accurate as possible. In your Aufgaben temperature and pressure never seem to be mentioned.
NAV reports that: "This problem is showing again too. It seems to happen after applying a change to an earlier input."
Rgleason Tested earlier and thought it was working, but did not try to change an earlier input, just entered a sight and then closed it and everything seemed to correspond during that session.
NAV reports that: "This problem is showing again too. It seems to happen after applying a change to an earlier input."
Rgleason Tested earlier and thought it was working, but did not try to change an earlier input, just entered a sight and then closed it and everything seemed to correspond during that session.