I suppose you are already able to build OpenCPN
itself, so all you should need to do is to follow the instructions in README at https://github.com/canboat/BR24radar_pi
After you clone the plugin source, go back to the build directory and do the build as normally - the plugin library (libbr24radar_pi.so) will then be in build/plugins/BR24radar_pi
Assuming you will start in the main OpenCPN source directory, all you should need is
git clone git://github.com/canboat/BR24radar_pi.git
cmake --build .
sudo cp plugins/BR24radar_pi/libbr24radar_pi.so /usr/lib/opencpn
No need to use CodeBlocks if all you need is to build. The last time I looked at the plug-in, there were some glitches in the GUI apparent on Linux
, but I did not look any deeper into it as there is zero radar
scanners around my living room.