Just installed the Digitalyacht USB-serial cable. The problem is that I do not get
my position. Only AIS
Same problem on a windows and a Mac computer.
(Same cable works great with Maxsea
on the same computer. On Maxsea
I get position and AIS
targets. I guess that excludes driver problems).
I guess I´m doing something wrong.
1. Choose the serial
port under AIS section
2. Choose AIS port shared under the GPS
3. Check the baud rate under the GPS
section and in the device manager
As soon as I choose AIS port shared i end up at the equator west of Africa
I need help !