Zeus2-12 not receiving Seatalk1 data

[DO335]

I have a Raymarine SeatalkNG network with ST60 instruments(depth and wind) connected via SeaTalk1 to SeaTalkng converter kit and an ACU-400 with EV1 Sensor Core connected to same SeatalkNG network, all functioning well for years. I recently added a B&G Zeus 2-12 (with latest sw update) to the SeatalkNG network using an appropriate adapter cable. The Zeus works fine except it doesn't display any data from the ST60s. When I do a device search on the Zeus the SeaTalk1 to SeaTalkng converter shows up but not the ST60s and I don't see any data on the Zeus from the ST60's. Any idea on what's going on or suggestions for testing that would help?

[smac999]

it is not going to see the st 60's it will only see the converter.

you need to do an auto source select. the depth and wind etc should come up as being from the converter. you need to manualy (or automatically) pick the sources for each data input