Hi, I have working Gamin MAPGPS 4208 which is my main nav display.
I recently added West
marine AIS-100 to my
boat.
when I use PC's
OpenCPN, I can
monitor AIS information and view other boats.
But, when I connected my two lines (RX/A+: white) and (RX/B-: orange-white) to AIS's NMEA+ and NMEA-,
Garmin does not recognize
AIS communication and its existence.
This connection is following AIS manual guidance.
Garmin says data ground is to be connected bewteen the two.
Before I try to connect both ground lines, I want to hear if anybody here experienced similar problems.
And of course answers.^^
Thanks,
Y.Lee
s/v Cascade