The PO of my boat has tied the VHF
and the depth
finder to the same battery
, independently fused with in-line fuses
, not running through the fuse block.
When the depth
finder is running, the electronic pulses bleed over into the VHF
, rendering it near useless with rythymic bursts of static. The squelch must be jacked up to the point that I would totally miss an incoming call.
Is there some kind of small, in-line noise
filter I can buy to put on the hot wire, or should I simply move the VHF to the other battery
? I really don't want to split loads though.