Cruisers Forum
 


Join CruisersForum Today

Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 01-10-2018, 08:39   #1
Registered User

Join Date: May 2011
Posts: 12
Upload a new scrip to brookhouse imux-st

Hi,

I am trying to upload a new scrip to my brookhouse imux-st but iíve been struggling for hours.

Step 1, press escape and enter menu, works fine
Step 2, I press F for adding a new script
, looks like this:
[/INDENT]*S,9,CD???,GP*E)
Step 3, upload file: I select the (attached file) in my terminal emulation program (CoolTerm), it echoís the content of the textfile and then nothing happensÖ

To try again I turn of the imux. When I upload the same file with only *E in it, it works fine. When I add *E as the first line it uploads but then nothing changes in the nmea data stream.

Possible cause could be that I do not have the option as described in the manual: "Under settings select Ansi terminal, under ASCII setup, tick Send line ends with line feeds.Ē But I guessed that this is the same as Terminal mode (Line Mode) see below.

Iíve been trying many settings and different terminal programs but so far failed. Iíve also tried to modify the script in different ways but nothing worked so far.

Please advice!

Marten
__________________

Martenhaven is offline   Reply With Quote
Old 01-10-2018, 10:06   #2
Registered User

Join Date: Jul 2013
Posts: 17
Re: Upload a new scrip to brookhouse imux-st

I donít know anything about your goal or that product (CoolTerm) but Iíve played with a few terminal emulators in my time. Any chance they are talking about ďenter key emulation?Ē https://learn.sparkfun.com/tutorials...nal-basics/all
__________________

tek-noid is offline   Reply With Quote
Old 02-10-2018, 05:00   #3
Registered User

Join Date: May 2011
Posts: 12
Re: Upload a new scrip to brookhouse imux-st

Guessed that setting Coolterm to raw mode vs line mode is the same for that matter. I suspect my script not to be right as *E seems to work. Received feedback from brookhouse and will test this out when I am back at the boat.
Martenhaven is offline   Reply With Quote
Old 09-10-2018, 02:25   #4
Registered User

Join Date: May 2011
Posts: 12
Re: Upload a new scrip to brookhouse imux-st

OpenCpn does not accept CD as an identifier (will be fixed soon), all Icom vhf radio's with GPS use CD as a identifier hence a script to convert.

Thanks to Brookhouse it is now working although I have not found what is wrong with my script, the script should be:

*S,9,CDRMC,GPRMC
*E
Martenhaven is offline   Reply With Quote
Reply

Tags
loa

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Imux NMEA communication error mkgsail OpenCPN 20 20-02-2019 10:35
Brookhouse iMux-ST - Credit where credit's due... 2Wind Marine Electronics 1 14-08-2015 22:09
Brookhouse Imux Review kmagill General Sailing Forum 5 03-03-2013 13:08
Brookhouse Multiplexer Greggegner Our Community 0 20-12-2011 20:19
Wiring Brookhouse AISC to two E-120 RM units C Skip R Marine Electronics 2 03-07-2011 15:27



Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 16:12.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.