Cruisers Forum
 


Join CruisersForum Today

Reply
 
Thread Tools Rate Thread Display Modes
Old 08-03-2014, 18:56   #1
Marine Service Provider

Join Date: Jan 2009
Location: Catawba Island, Ohio
Boat: Hunter Legend 35.5
Posts: 11
type 1 linear drive substitute

Has anyone used a general industrial actuator as a substitute for a type 1 linear drive made by Raymarine. I have been researching this because I think I may be able to buy an industrial actuator for far less than one made by Raymarine. I have found several actuators that come pretty close to Raymarine's but seem to fall a little short of their specs. Anyone who could shed a little knowledge about this would greatly be appreciated.
__________________
don habegger is offline   Reply With Quote
Reply

Tags
linear drive

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 07:44.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.