I bought an old boat (with no navigation
electronics) and have spent many an hour searching the interwebs for wiring
diagrams for the transducers installed in the boat to connect them to an Actisense DST-2, all to no avail -
so here I am matey's seeking your help.
The Log transducer has this on the cable
02-0699 sen-speed-h 31-277-3-71
and the cable colours are red,blue,black,yellow,green and screen
transducer has this on the cable
02-0399 sen-depth-h 31-197-1-01
and the cable colours are orange/green, orange/white and screen
I would dearly like to know the wiring
info for these cables
. In case you are wondering why I want this info - well I have built a little system that takes the nmea 0183
output of the DST-2 and displays it in a useful format on a tablet over wifi
. It seemed like a good idea until I came to connect the transducers.
Many thanks in advance