I have a
Garmin 3206 that I have been nursing along. It has always had a foggy (internal)
screen that seems to go away as it warms up.
This summer I took it off the
boat and opened it up to dry for a couple weeks in my office.
Then I noticed that the outer plastic protective
screen had separated the adhesive/tape/glue? that
seals it to the case. So
water was finding its way in just by rolling down the screen.
I have had this unit apart so I'm familiar with disassembly.
Does anyone know what type of
adhesive or glue would put it back together again? The original appears to be a very thin double sided tape. Not sure if this is commercially available or if a "glue" would be a better option. McMaster has loads of tapes and glues just looking for opinions on what you think is best.
Thx
Linear Mode
Recent Discussions