Raymarine ST 2000

[Compactorguy]

I have a Standard Horizon Matrix AIS Gx2150, and Garmin 441s that communicate using NMEA 0183 high speed on Garmin port 1. But I can't get the Raymarine to receive data from port 2 on the Garmin 4200 baud rate any suggestions


Sent from my iPhone using Cruisers Sailing Forum

[Beausoleil]

Make sure you configure the Garmin 441 to output the correct NMEA sentences which the ST-2000 tillerpilot can recognize. The recognized sentences are listed in the AP manual on page 47 (at least in the March 2006 version of the manual). And make sure the 441's bit rate (baud rate) is set to 4800 bps, not 9600.