Cruisers Forum
 


Join CruisersForum Today

Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 03-07-2017, 16:27   #1
Registered User

Join Date: Mar 2015
Location: Moncton,N.B
Boat: Viking 28
Posts: 15
Raymarine ST 1000 autopilot

Cannot reset factory setting, anyone know the reset directions for factory reset.
Aeverett is offline   Reply With Quote
Old 03-07-2017, 17:20   #2
Senior Cruiser

Cruisers Forum Supporter

Join Date: Jul 2005
Location: Bellingham
Boat: Outbound 44
Posts: 7,676
Re: Raymarine ST 1000 autopilot

From the Ray website, probably the same for the 1000
Quote:
. To Reset the ST2000+ tiller, press and hold the +1 and -10 buttons together, the unit will beep and flash the pilot number (2000), release the +1 and -10, then press and hold the +1 and -10, and the pilot number will blink, use the +1 to change to different pilot number (1000). Press and hold the +1 and -10 to lock that number in. Then cycle power to the unit, when the unit turns back on follow the above procedure and change back to 2000, cycle power and the unit will be reset.
__________________
Paul
Paul L is offline   Reply With Quote
Reply

Tags
autopilot, marine, raymarine

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
CPT autopilot plus Monitor windvane or just W-H autopilot? graydog Construction, Maintenance & Refit 9 03-05-2015 23:21
Raymarine st 1000 tiller pilot dinajui Marine Electronics 5 04-11-2012 11:47

Advertise Here


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 18:29.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
×

ShowCase vBulletin Plugins by Drive Thru Online, Inc.