Cruisers Forum
 


Join CruisersForum Today

Reply
 
Thread Tools Rate Thread Display Modes
Old 22-04-2012, 12:40   #1
Registered User
 
ryderstk's Avatar

Join Date: May 2011
Location: Tampa, Florida
Boat: Endeavour 32
Posts: 27
Raymarine SL72 No Returns display

I acquired a used SL 72 plus and am having trouble getting it to work. According to the previous owner it was never fulling installed on their boat. I have replaced the r126 flat molex connector that connects to the scanner because it had loose wires and gave me the "scanner Not Responding". Once i replaced the molex connector, that problem was solved. Continuity check on the cable confirms it is good. Shield on the cable is very rusty. Not sure if that is an issue. The scanner rotates. The display works. I ran the hidden diagnostic and all functions passed.

However when I transmit the screen shows no returns. I found a tip on the web about adjusting the gain manually. My screen stays clear till I get to 92+ then it starts to go black. According to that check, the cable has an issue. I have checked it multiple times with the same result. Before I buy a new cable, I am hoping someone can help..

Thanks
S/V Island Fever
__________________
ryderstk is offline   Reply With Quote
Reply

Tags
raymarine

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 13:54.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.