Cruisers Forum
 


Join CruisersForum Today

Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 03-01-2014, 17:21   #1
Registered User
 
timj's Avatar

Join Date: Aug 2009
Location: Auckland New Zealand
Boat: Pelin Crusader 42ft
Posts: 38
Navico Corus Nav System

A friend has this system running well except that the log no longer gives any speed read out.

When he removes the sender from the hull and turns the impeller by hand the speed indicates on the display unit.

But when he reinstalls in back in the hull there is no reading.

The sender is not obstructed in any way when in position in the hull.

We think it must be an electronic issue but very puzzling!

Any thoughts appreciated. These units are no longer on the market so zero interest here in NZ in any repair support.
timj is offline   Reply With Quote
Reply

Tags
navico

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Advertise Here


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 19:24.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
×

ShowCase vBulletin Plugins by Drive Thru Online, Inc.