Can't post a picture right now, but hope some-one can help me with identification from my description.
Pump is 12v reversing type, came fitted to AutoHelm
pilot about 10yrs ago.
Pump is all black, about 12-13" long, 3" dia. Motor
is seperated from Hyd pump by a 2" aluminum
casting cube which is hollowed out. Shafts from pump and motor project
into the hollow casting, where they are joined by donut shaped dogs
, which are locked unto the respective shafts by grub screws.
Pump is a 3 hose type. The solenoid is on the ram. Fluid return chamber has a top and a side entry port, all openings NPT.
Desperately need pump seal to drive shaft end.
C,mon guys, I'm Begging, owners want to go where it is warm.