Cruisers Forum

Join CruisersForum Today

  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
Thread Tools Search this Thread Rate Thread Display Modes
Old 03-03-2015, 02:29   #1
Registered User

Join Date: Aug 2013
Location: Phuket, Thailand
Boat: Seahorse 52'
Posts: 13
Icom M710 to EM-101 pin assignment

If anyone owns an IcomM710 with EM-101 microphone and can spare 5 minutes - please unscrew the mike lead connecting to the M710 and let me know how the 4 wires are connected!
There are 4 wires - yellow, red, black and a screening wire wrapped around the yellow wire. To which pins do these wires connect?
The manual does NOT refer to the colour coding, so is of no help...
Many thanks in advance!
JohnInBKK is offline   Reply With Quote

icom, men

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Icom M710 with LDG AT-200Pro ? Gatorman71 Marine Electronics 0 14-11-2010 19:31
Icom M710 Pactor IIUSB: cable configuration Paul Willems Marine Electronics 5 09-10-2008 15:56
new Icom M710 phorvati Marine Electronics 2 19-01-2006 14:15

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 02:16.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.