Digital Yacht AIT2000 MMSI programming

[gaucho]

Can anynone help me with reprogramming my MMSI number on my DY AIT2000? It requires special software that will only be given to NMEA installers (or I guess any installer that actually proves to be an installer. Apart from that it's a very easy thing, just come in, plug your laptop to the USB cable I have setup, and change the MMSI with the proper software.

Anyone have this software? Any pro in the area that can do it for a reasonable fee?

I already got the sw and hardware to reprogram my Icom 802, M422 VHF and my Icom handheld. I just need to update the AIT and Im done getting all my MMSI numbers aligned!

Cheers

[smac999]

changing MMSI can likly only be done by the factory.

installers can enter into a new one that is blank. easy with software. and should have come with unless in USA. much different then changing an mmsi

[gaucho]

Digital Yacht will send the software to a NMEA installer I just need one willing to come to the boat and plug-in the computer to the usb and do it. Should be a one hour ordeal.