I recently put a Simrad
EVO-2 9" chart plotter with a P-79 in-hull transducer and Garmin
gWind wireless unit on our boat. (NMEA 2000)
Initially all worked fine. However the last two times we've had her out the depth
started to cut in and out. Sometimes it is out for only a few seconds, other times for minutes at a time. Nothing I do seems to affect when it comes on/goes out. Same thing with the gWind. However, if I reboot the NMEA
network it 'usually' will come back.
Anyone have any ideas on what I should look for to fix these issues?
(I have checked all the connectors, made sure they are tight. I do remove the Simrad
when we are not there, however.)