b&g zeus

[dennis gosling]

Hi i have just purchesed this plotter and wonderd if i can connect it to my raymarine system or do i need to have it as a stand alone system i have a full raymarine system

[witchcraft]

Your best bet is to contact Navico to confirm ability to connect. It can be tough to connect disparate systems together.

[TheOffice]

If they are both NMEA 2000 it is easy.


Sent from my iPhone using Cruisers Sailing Forum

[44'cruisingcat]

I have a Simrad plotter connected to Raymarine ST60 instruments. It's pretty simple, but I needed to buy two bits of hardware.


A Seatalk - NMEA convertor, from Raymarine and a NMEA 2000 - NMEA 0183 convertor from Simrad. Both were < $100 each.


As noted, if your Raymarine gear is NMEA 2000 it should be simpler.

[dennis gosling]

Hi yes it is nmea 2000 system on my 44.7 so i will check it out and see what i need thanks