Originally Posted by Oistein
Trying to disassemble a dead AH1000. (Old, but has worked until lately
- probabel fault is cable or internal cable connection).
It seems that the switch and the magnetic wheel
needs to be removed first for a clean disassembly.
Anyone knows how?
the center of the switch knob lifts out (knife tip) revealing a circular nut. Spin it off with an awl tip then lift
the switch knob. The wheel knob lifts off after removing the compass
rose plate and the slot screw.
The 6 body screws can be spun out by using awl tips too. I subsequently cut a slot in each screw for future convenience...
Do you still have the unit? I'm looking for a functioning circuit board....