I am running Windows XP with SeaClear II. I have a Garmin
GPSMap 168 sounder GPS
unit connected to a GigaWare serial
to USB adapter. When I start SeaClear and put it on the correct COM port and BAUD rate, it does not give me an error message saying it is not available, so I assume its working (if I change the COM port it says it cant find it). However, nothing happends when I push "find position".
Any suggestions for troubleshooting? Any way I can read if the NMEA
output is coming through (yes, the GPS
unit is on, and I can read the lat/long from the screen
on the unit