My GPS Furuno
GP32 is connected to MaxSea
Time Zero. Data transfer (position, cog etc.) from GPS
TZ works fine. However, sending routes and waypoints data from Maxsea TZ to the GPS does not work. The LED status indicators connected to the 'tranmit' and 'recieve' of the RS232
connection, confirms that data is tranferred from MaxSea TZ to the GPS but no route
or waypoint information is placed in the GPS (GP32 does not beep at the end of the transfer). Is the data format Maxsea TZ applied correctly? Can I configure Maxsea TZ such that this is going to work? How to solve this problem if there is any solution?
With the old version MaxSea 10. I had no problems to upload routes and waypoints to the furuno