Hi all!
We recently bought
iNavX (Pro) for Android (!) with this chart set:
https://www.fugawi.com/store/product...23&taxon_id=88
So far so good, but we have a few issues we can't figure out: how
depth is shown (most important issue) and why velocity and tracks showing are not working properly.
iNavX settings offers
depth in feet, meters and fathom. Being Dutch, we have set it to show meters.
However, no matter what we do (we change the settings around, restart etc), what the
Navionics chart shows is way more depth then our trusted paper
charts and even our own
depth sounder say ...
We've done the math thinking it may have been showing feet or fathoms no matter what you set it to, but nope.
Since the
charts should be accurate, it's probably something we're missing / doing wrong. We use the settings located at More > Settings > Units >> meters. Is there another setting hiding somewhere maybe?
Secondly, the app has the option to show the Velocity Vector (
iNavX FAQ - Chart Settings | iNavX). We can't get it to actually show at all.
Finally there's a Show Track option - this sometimes works. To use it, we have that setting active and set iNavX to track our
route. Doing that will sometimes result in the track being drawn on the chart, and sometimes nothing happens
The iNavX help files helped us along, but apart from the basic manual, almost all information is for the
iPad version, which is a lot more mature then the Android version. I've emailed
Fugawi about the depth issues, but they simply replied with where to find the settings so that didn't help much
So far we've only used iNavX sailing our local waters, but we're planning a trip to the UK in a couple of weeks and it would be nice to be able to use it then ... (and yes, we also have the paper charts
).
Thanks for any help with this; we're too confused and technically challenged to figure this out for ourselves