Rocna + Bowsprit = Impossible?

[Hampus]

I would like this Rocna Anchors - Home of the Rocna anchor - New generation boat anchors to go here

http://4.bp.blogspot.com/_RVEmIeEaeK...vid+brygga.jpg

I could always bring out the angle grinder and cut either the bow sprit on the boat or the roll bar on the anchor. Neither seem right

Has anyone solved this problem yet?

Edit: We'll need to go with the 33kg rocna, so it's a fairly large piece of metal.

/Hampus

[fishwife]

I've no idea, sorry. I just wanted to say that you have a beautiful boat, but I guess you know that

Paige

[Hampus]

Thank you

[CAELESTIS]

Try here:Common fit challenges (Rocna Knowledge Base)

[Hampus]

Originally Posted by CAELESTIS

Try here:Common fit challenges (Rocna Knowledge Base)

Thank you! I was searching for something like that on the Rocna webpage. I obviously wasn't searching hard enough...

/Hampus

[MikeinLA]

Originally Posted by fishwife

I just wanted to say that you have a beautiful boat, but I guess you know that

Paige

I'll second that emotion. Beautiful!

Mike

[lancelot9898]

I have a Manson supreme 45 pounder which fits perfectly on my Tayana 37 bow pulpit. However my rollers are located at the end of the pulpit and I noticed that yours are not so that probably doesn't help you. Most Tayana anchor rollers are mid pulpit locations like yours, but I really perferred the end location. Like most things with the boat there are pros and cons to that choice.