17lb Fiberglass Tank Stern Rail Mount Needed

[Fortytwo]

Where can I find a stern rail mount for a 17lb fiberglass LPG tank?

[tkeithlu]

Try this link.
Sure Marine Service, Inc. | Propane Railmount Bracket Assembly

[Cotemar]

This may help give you ideas also.

https://www.google.com/search?q=prop...HemgAzUQsAQIKQ

[Fortytwo]

[Fortytwo]

Looking for a manufacturer that can do this.

[WSMFP]

Something like this?

https://powertank.com/products/propa...ank-power-tank

[Pete17C]

Look for a steel fabrication shop.

We could do it where I work, but I think you'll do better locally.

Universal Metal Fabricators, Inc. | Home

[Fortytwo]

Originally Posted by WSMFP

Something like this?

https://powertank.com/products/propa...ank-power-tank

I’ve seen those, but I’d rather have something fabricated that is solid that I can drop a tank in and bungee it down. I will be mounting it on the outside of the stern rail and I don’t like the idea of having to lean over it to tighten and untighten the strap.

[Fortytwo]

Originally Posted by Pete17C

Look for a steel fabrication shop.

We could do it where I work, but I think you'll do better locally.

Universal Metal Fabricators, Inc. | Home

I’ve spoken to a local shop, but they can’t bend tubing in that small of a diameter. Can you at your shop?

[Pete17C]

Originally Posted by Fortytwo

I’ve spoken to a local shop, but they can’t bend tubing in that small of a diameter. Can you at your shop?

What material, what diameter is the tubing and what is the radius of the small ring at the bottom?

[Fortytwo]

Any stainless steel tubing would be ok... 1”, 7/8”...

The OD of the tank I have now, or any normal rental tank is 12”, so one ring with the ID that size and another smaller at the bottom to keep it out of the water would work.

[Pete17C]

I'll check with the guys in the shop in the morning (EDT), shop closes at 3:30pm and those guys don't leave late

[Fortytwo]

How about stainless round stock instead of tubing?

[Fortytwo]

[Fortytwo]

Job done.