Winch Buddy.

[Sarayu]

Is the Winch Buddy , with the right angle drive still available.
I found a site saying they cost $350 for a reconditioned unit and around $800 for a new model but have not been able to find a supplier of either. Preferably around Oregon or perhaps BVI, Martinique.


If you must tell me your opinions, tell me what you believe in. I have plenty of doubts of my own.
JOHANN VON GOETHE, writer

[Dave852]

Originally Posted by Sarayu

Is the Winch Buddy , with the right angle drive still available.
I found a site saying they cost $350 for a reconditioned unit and around $800 for a new model but have not been able to find a supplier of either. Preferably around Oregon or perhaps BVI, Martinique.


If you must tell me your opinions, tell me what you believe in. I have plenty of doubts of my own.
JOHANN VON GOETHE, writer

You can buy the winch rite from Rich. http://www.cruiserowaterandpower.com/WinchRite.php



Sent from my iPad using Cruisers Sailing Forum

[Sandero]

You can buy the Milwaukee drill and the Winch bit separately on the WWW. GOOGLE it.

Works a charm and you have a awesome drill to boot. That winchrite is stupid.

[a64pilot]

Then there is the cranker which I have and like
http://www.thecranker.com/
Liked the drill part of it so much I bought the vacuum, which uses the drill battery
https://www.milwaukeetool.com/power-...rdless/0880-20
One thing about using a drill, is if you need it, you have an enormously powerful drill available.

[a64pilot]

I posted the link to the wrong vacuum, there are two, one 18V and one 28V
Here is the link to the 28V
https://www.milwaukeetool.com/power-...rdless/0780-20
Comes without a battery, you just use the one for the drill, that way of course you can vacuum the boat and not have AC power.