Cruisers Forum
 

Go Back   Cruisers & Sailing Forums > Engineering & Systems > Deck hardware: Rigging, Sails & Hoisting
Cruiser Wiki Click Here to Login
Register Vendors FAQ Community Calendar Today's Posts Log in

Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 31-07-2014, 11:38   #1
Registered User

Join Date: Oct 2013
Posts: 547
What hardware to bring halyards over a cabin house?

The boat is a Pearson Triton. I want to bring the Spinnaker halyard, boom vang and topping lift back to the cockpit. Everything else will be on the mast.

I'm not sure what hardware to use.

They will be coming back from the base of the mast. They need to go parallel to the deck (or close to parallel) because the dinghy will be on top of the doghouse on chocks. So they need to go under the bow of the dinghy, then up the front of the doghouse and then along the doghouse top.

I'm not sure if I can use deck organizers at the edge of the doghouse, can they take line at an angle?

If not deck organizers, what would I use? And what would I put at the base of the doghouse to make the bend? I'd ideally like everything to be fixed and not have blocks involved.

Thanks for your thoughts!
sully75 is offline   Reply With Quote
Old 31-07-2014, 11:55   #2
Registered User

Join Date: Feb 2013
Location: Oregon
Boat: Seafarer36c
Posts: 5,563
Re: What hardware to bring halyards over a cabin house?

Can they come off the mast at the height of your cabin instead of the deck?
model 10 is offline   Reply With Quote
Old 31-07-2014, 12:07   #3
Registered User

Join Date: Oct 2013
Posts: 547
Re: What hardware to bring halyards over a cabin house?

no, because the dinghy is going to be in the way. At least not the way it's going now.
sully75 is offline   Reply With Quote
Old 31-07-2014, 12:13   #4
Moderator Emeritus
 
roverhi's Avatar

Join Date: Aug 2005
Location: Carlsbad, CA
Boat: 1976 Sabre 28-2
Posts: 7,505
Send a message via Yahoo to roverhi
Re: What hardware to bring halyards over a cabin house?

There are over and under deck organizer type blocks. Get a Harken catalogue. It's a great source of what's out there and where to use it. Depending on how many and where you need to run them, the cost could get spendy if you go that route. Might try Garhauer Garhauer Marine Hardware -8794406. Their hardware is quite nice and way cheaper than the usual suspects.

You probably could run the line over the deck using plastic bulls eyes with stainless inserts.
Schaefer Marine Hardware - Product Catalog

Fortunately you've got a small boat so loads aren't going to be all that great. All but the spinnaker halyard won't have that much tension or friction from passing a lot of line through.
__________________
Peter O.
'Ae'a, Pearson 35
'Ms American Pie', Sabre 28 Mark II
roverhi is offline   Reply With Quote
Old 31-07-2014, 13:49   #5
Registered User

Join Date: Oct 2013
Posts: 547
Re: What hardware to bring halyards over a cabin house?

Thanks for the info. While I'm asking, does the arrangement make sense:

On Mast:
Main Halyard
Jib Halyard
Storm Jib Halyard

In cockpit:
Spinnaker Halyard
Boom Vang
Topping lift

Much cheaper to keep stuff near the mast, but it seems like there would be a lot of advantage in having those three in the cockpit.
sully75 is offline   Reply With Quote
Reply

Tags
cabin, halyard, hardware


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Best way to go about total cabin and pilot house refit captaingregger Construction, Maintenance & Refit 12 30-10-2013 16:40
For Sale: Sailboat Hardware, Gear, Deck and Cabin w.posner Classifieds Archive 3 06-03-2013 05:58
Insulation against cabin house sides brakauskas Construction, Maintenance & Refit 14 17-02-2013 06:53
Dirt House Stainless Hardware on Deck? Mule Deck hardware: Rigging, Sails & Hoisting 4 06-01-2010 10:02
It's Never Over Until You Say It's Over maxingout General Sailing Forum 12 16-03-2009 16:32

Advertise Here


All times are GMT -7. The time now is 00:24.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.