|
|
18-09-2016, 15:37
|
#16
|
Registered User
Join Date: Jun 2014
Location: Up the mast, looking for clean wind.
Boat: Currently Shopping, & Heavily in LUST!
Posts: 5,629
|
Re: Splicing Dyneema
Quote:
Originally Posted by Dockhead
I think most people use knives.
However -- surgeons these days never use scalpels or other knives, whenever they can use scissors. I'm the same with cordage. I bet if you tried the awesome D-Splice dyneema shears, you might also be a convert to scissors.
|
I just can't see getting enough control with them in order to make fine, or precise cuts. And partial depth cuts are out too. Ditto on anything of thickness, non? How do you work on a 12mm or 16mm line with them, even just it's core? They're handy for small stuff, & I have a pair permanantly affixed to my rigging apron, but...
On Brion's splicing wands. A handy way to store them is to get some PVC pipe of the proper size, & glue a cap onto one end, & put a screw on cap onto the other. That way they won't get bent or maimed.
PS: Anyone have some good scissors sharpening tips, aside from using the bench grinder? I've got one small sharpener for them which has a built in pre-set angle, & you just stroke it down the blades. But without it or a grinder, I'm SOL. Ergo the query.
__________________
The Uncommon Thing, The Hard Thing, The Important Thing (in Life): Making Promises to Yourself, And Keeping Them.
|
|
|
18-09-2016, 15:47
|
#17
|
Registered User
Join Date: Nov 2013
Location: Port Moresby,Papua New Guinea
Boat: FP Belize Maestro 43 and OPBs
Posts: 12,891
|
Re: Splicing Dyneema
Quote:
Originally Posted by Stumble
I don't use scissors much, I really prefer ceramic knives. Any set of ceramic knives will far out perform stainless blades. Metal doesn't handle the HDPE material well, it gets dulled very quickly. Ceramic however holds up far better, you just have to be careful not to chip the blades.
|
Another vote for ceramic knives. You don't need anything fancy. I keep the paring knife out of a set similar to this in my ditty bag.
https://www.aliexpress.com/item/Fine...609688453.html
And like Stumble says - keep then away from anything that can chip the blades.
|
|
|
18-09-2016, 15:55
|
#19
|
Marine Service Provider
Join Date: Jan 2011
Location: St. Petersburg, FL
Boat: Retired Delivery Capt
Posts: 3,684
|
Re: Splicing Dyneema
I splice all my double braid lines and even add backsplices to the ends.
You need some sharp scissors.
I buy cheapos and use them for 5-6 splices and then pitch them.
However, Dyneema is a bear to cut with scissors. I use a brand new razor in my utility knife for the dyneema and scissors for the jacket.
Google New England Ropes eye-splice for a great how-to video. Also Google double braid backsplice, for a video on how to finish the line smartly.
Sent from my iPhone- please forgive autocorrect errors.
__________________
"Whenever...it requires a strong moral principle to prevent me from deliberately stepping into the street, and methodically knocking people's hats off- then, I account it high time to get to sea..." Ishmael
|
|
|
18-09-2016, 16:41
|
#20
|
Moderator
Join Date: Mar 2009
Location: Denmark (Winter), Helsinki (Summer); Cruising the Baltic Sea this year!
Boat: Cutter-Rigged Moody 54
Posts: 33,863
|
Re: Splicing Dyneema
Quote:
Originally Posted by UNCIVILIZED
I just can't see getting enough control with them in order to make fine, or precise cuts. And partial depth cuts are out too. Ditto on anything of thickness, non? How do you work on a 12mm or 16mm line with them, even just it's core? They're handy for small stuff, & I have a pair permanantly affixed to my rigging apron, but...
|
Yes, you're right, partial depth cuts can't be done with scissors -- you definitely need a knife for that.
But I cut up to 16mm double braid with really sharp micro-serrated scissors and it works fabulously well. Maybe I'm just not as skillful with a knife as some other people, but I find it much easier to make a very fine, even cut with very sharp scissors, for example after you've whipped a rope end and need to shave off the excess just exactly so.
The other big advantage of scissors is you don't need a cutting board. I don't have a workbench on my present boat (that will be remedied with the next boat), and I don't have a workshop on land, so this is a bit of a PITA for me.
__________________
"You sea! I resign myself to you also . . . . I guess what you mean,
I behold from the beach your crooked inviting fingers,
I believe you refuse to go back without feeling of me;
We must have a turn together . . . . I undress . . . . hurry me out of sight of the land,
Cushion me soft . . . . rock me in billowy drowse,
Dash me with amorous wet . . . . I can repay you."
Walt Whitman
|
|
|
18-09-2016, 18:23
|
#21
|
Marine Service Provider
Join Date: Dec 2010
Location: Little Compton, RI
Boat: Cape George 31
Posts: 3,009
|
Re: Splicing Dyneema
Quote:
Originally Posted by Lojanica
So I was going to make the 2 point bridle out of polypropylene which will act as a bridle and snubber.
It floats, is springy and should dampen the peak forces.
I like the idea of using the dux as a towline and also as backup rigging too in the event of failure. Your point about using the dux for shackles duly noted. I'll get some other line for making soft shackles I guess. Which would you recommend?
Thanks again for the input.
|
For soft shackles, just use Samson Amsteel, New England's HTS-78, or Marlow's D12. In fact, I'd use any of those for a towline over Dux, which is too stiff to handle easily when pulling in the dinghy and stowing the towline. There's a lot to be said for nice soft hand in a line.
Ben
Zartmancruising.com
|
|
|
18-09-2016, 20:31
|
#22
|
cruiser
Join Date: Nov 2007
Location: Probably in an anchorage or a boatyard..
Boat: Ebbtide 33' steel cutter
Posts: 5,030
|
Re: Splicing Dyneema
Quote:
Originally Posted by Lojanica
I purchased some 13mm Dyneema Dux
Was planning on using for rigging, shackles, and tow lines on the boat etc.
|
Half inch? Thems gonna be big shax!
Careful using that as a tow line, no give whatsoever, you'll be ripping off cleats....
|
|
|
18-09-2016, 21:44
|
#23
|
Registered User
Join Date: Nov 2013
Location: Port Moresby,Papua New Guinea
Boat: FP Belize Maestro 43 and OPBs
Posts: 12,891
|
Re: Splicing Dyneema
Quote:
Originally Posted by Dockhead
Yes, you're right, partial depth cuts can't be done with scissors -- you definitely need a knife for that.
But I cut up to 16mm double braid with really sharp micro-serrated scissors and it works fabulously well. Maybe I'm just not as skillful with a knife as some other people, but I find it much easier to make a very fine, even cut with very sharp scissors, for example after you've whipped a rope end and need to shave off the excess just exactly so.
The other big advantage of scissors is you don't need a cutting board. I don't have a workbench on my present boat (that will be remedied with the next boat), and I don't have a workshop on land, so this is a bit of a PITA for me.
|
I've just got a small plastic kitchen cutting board (about A4 paper size) they I keep in a bag with all my other ropework bits and pieces. Provides a good cutting surface either on the deck on on my lap.
|
|
|
19-09-2016, 01:19
|
#24
|
Moderator
Join Date: Mar 2009
Location: Denmark (Winter), Helsinki (Summer); Cruising the Baltic Sea this year!
Boat: Cutter-Rigged Moody 54
Posts: 33,863
|
Re: Splicing Dyneema
Quote:
Originally Posted by StuM
I've just got a small plastic kitchen cutting board (about A4 paper size) they I keep in a bag with all my other ropework bits and pieces. Provides a good cutting surface either on the deck on on my lap.
|
I do too, but the sharp scissors allow me to do it without a table or lap. The advantage is especially great if doing this while underway.
None of these advantages will make much difference to a really skilful person with a really good knife and a workbench, but to someone like me lacking not only the knife-work skill but the time to play with knives enough to keep them really sharp, not to mention the workbench, the ultra sharp micro-serrated scissors are a Godsend.
Sent from my D6633 using Cruisers Sailing Forum mobile app
__________________
"You sea! I resign myself to you also . . . . I guess what you mean,
I behold from the beach your crooked inviting fingers,
I believe you refuse to go back without feeling of me;
We must have a turn together . . . . I undress . . . . hurry me out of sight of the land,
Cushion me soft . . . . rock me in billowy drowse,
Dash me with amorous wet . . . . I can repay you."
Walt Whitman
|
|
|
19-09-2016, 06:58
|
#25
|
Marine Service Provider
Join Date: May 2012
Location: New Orleans
Boat: We have a problem... A serious addiction issue.
Posts: 3,974
|
Re: Splicing Dyneema
Quote:
Originally Posted by Dockhead
I do too, but the sharp scissors allow me to do it without a table or lap. The advantage is especially great if doing this while underway.
None of these advantages will make much difference to a really skilful person with a really good knife and a workbench, but to someone like me lacking not only the knife-work skill but the time to play with knives enough to keep them really sharp, not to mention the workbench, the ultra sharp micro-serrated scissors are a Godsend.
Sent from my D6633 using Cruisers Sailing Forum mobile app
|
In a pinch I will use whatever I have to hand. Scissors, a knife, razor blades, I once took apart a safety razor to responce a asym tack line... But I prefer a ceramic knife. I have good steel blades, but I don't like sharpening them enough to want to use them to cut dyneema, it just dulls them to fast. My understanding of it is that next to obsidian blades a good steel blade should be the sharpest blade possible. The downside is that by cut number two the steel has dulled while the ceramic keeps trucking along.
In my splicing kit I have a couple of ceramic knives, a pair of ceramic scissors, and a pair of stainless scissors... I always reach for my ceramic pocket knife though.
__________________
Greg
- If animals weren't meant to be eaten then they wouldn't be made of food.
|
|
|
19-09-2016, 19:08
|
#26
|
Registered User
Join Date: Jun 2014
Location: Up the mast, looking for clean wind.
Boat: Currently Shopping, & Heavily in LUST!
Posts: 5,629
|
Re: Splicing Dyneema
A good steel blade won't go dull on you fast. Which, I think, is why Brion Toss's crew was lusting after mine. And yes, it helps that I've had knives since age 4. But everyone should really know how to use & keep one in good condition. They're Mankind's oldest tool.
Look for a good carbon steel, or tool steel. Non-stainless, as with stainless you give up a lot of steel's better properties in a cutting edge, unless you buy a really high end stainless knife. Keep it regularly oiled, & after a bit the steel soaks up enough oil so that rust isn't an issue. And once you've put a good edge on it, it doesn't take much to keep it shaving sharp. Mine was good for a week of splicing, including in Brion's class without need of a touch up.
Another option I'm told, is a knife made from Stellite or it's sister alloys like Talonite. They're pricey, but essential the metal is like that in Cobalt bits. In that there are micro particles which comprise part of the alloy, which, coupled with the base metal, create what amounts to a micro serrated alloy that cuts like crazy & is tougher to dull.
The other catch besides the cost, is that compared to steel they're a bit more fragile.
Stumble, you're not joking about obsidian. They've long been regarded as the king/one of the kings when it comes to sharpness. Though most of them that you commonly see are pressure flaked, & thus the epitome of serrated knives. And they also define fragile.
__________________
The Uncommon Thing, The Hard Thing, The Important Thing (in Life): Making Promises to Yourself, And Keeping Them.
|
|
|
20-09-2016, 00:14
|
#27
|
Moderator
Join Date: Mar 2009
Location: Denmark (Winter), Helsinki (Summer); Cruising the Baltic Sea this year!
Boat: Cutter-Rigged Moody 54
Posts: 33,863
|
Re: Splicing Dyneema
Quote:
Originally Posted by UNCIVILIZED;2215981. . . [B
PS:[/B] Anyone have some good scissors sharpening tips, aside from using the bench grinder? I've got one small sharpener for them which has a built in pre-set angle, & you just stroke it down the blades. But without it or a grinder, I'm SOL. Ergo the query.
|
You can't sharpen the micro-serrated ones -- you just throw them away when they get dull.
That makes them unsuitable for professional use, I guess.
But if you're just using them on your own boat (vs doing it professionally, for lots of boats), they will last a few years -- maybe a few hundred splices.
Your posts have made me think that I need to give another go at having a really sharp rigging knife on board. I keep a Myerchin (handed down from my Father) on my person, and while that's a great all around utility knife, it's not a great blade and quite a lot of work to keep even reasonably sharp.
Maybe when I'm in Finland in a couple of days I'll try to acquire one of those Saami (Eskimo) Puuko knives made from Damascus (hand forged, laminated) steel. The riggers up there swear by them.
__________________
"You sea! I resign myself to you also . . . . I guess what you mean,
I behold from the beach your crooked inviting fingers,
I believe you refuse to go back without feeling of me;
We must have a turn together . . . . I undress . . . . hurry me out of sight of the land,
Cushion me soft . . . . rock me in billowy drowse,
Dash me with amorous wet . . . . I can repay you."
Walt Whitman
|
|
|
20-09-2016, 05:44
|
#28
|
Registered User
Join Date: Sep 2012
Location: Northeast, USA
Boat: Luders 36
Posts: 237
|
Re: Splicing Dyneema
I think dux is maybe the worst choice for a tow line that you could find, other than say 1x19 wire. Very little stretch, no chafe chafe cover, very stiff, slippery in the hand, etc. Also it sinks, which is not ideal for a tow line.
Finally it is way to expensive for the job.
Sent from my iPad using Cruisers Sailing Forum
|
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Rate This Thread |
Linear Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Advertise Here
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
Vendor Spotlight |
|
|
|
|
|