Cruisers Forum
 

Go Back   Cruisers & Sailing Forums > Engineering & Systems > Deck hardware: Rigging, Sails & Hoisting
Reload this Page Slipped compression post
Cruiser Wiki Click Here to Login
Register Vendors FAQ Community Calendar Today's Posts Log in

Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 04-02-2014, 16:14   #1
Registered User
 
Jake001's Avatar

Join Date: May 2012
Location: Kemah
Boat: Columbia 34 Mk II
Posts: 3
Slipped compression post
Hi all,

I'm looking at purchasing a 1994 Hunter 33.5. After removing the inspection panel for the compression post, I found what looks like a slipped fitting between the deck plate and the post. My rigger is coming out tomorrow for an inspection but I thought I'd check with forums for some feedback.

https://www.dropbox.com/s/d90zehgyv157y9c/post1.jpg
Jake001 is offline   Reply With Quote
Reply

Tags
compression

« Epoxy for cap rail repair | Looking for sailcloth advice »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Advertise Here


All times are GMT -7. The time now is 12:57.

Contact Us - Cruisers & Sailing Forums - Sitemap - Community Rules - Terms of Service - Privacy - Accessibility - Top

Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
close

Privacy Guaranteed - your email is never shared with anyone, opt out any time.


ShowCase vBulletin Plugins by Drive Thru Online, Inc.